• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.525-534
• /
• 2022

In this study, we investigated the applicability and optimal operating strategy of a closed-loop pressure retarded membrane distillation (PRMD) for brackish water desalination. For effective operation with net power generation, high temperature of heat source over 90 ℃ and feed flow rate at 0.6 kg/s are recommended. At 3 g/L of feed concentration, the average permeate flux and net energy density showed 8.04 kg/m²/hr and 2.56 W/m², respectively. The average permeate flux and net energy density were almost constant in the range of feed concentration from 1 to 3 g/L. Compared to the case with seawater feed, the PRMD with brackish water feed showed higher average permeate flux and net energy density. Thus, PRMD application using brackish water feed can be more effective than that using seawater feed in terms of power generation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.3
• /
• pp.257-262
• /
• 2017

This study was conducted to investigate the growth and skin color of red- and white-colored fancy carp Cyprinus carpio var. koi juvenile reared at different water temperatures (21, 24, 27, and $30^{\circ}C$) for eight weeks. Two experimental diets were prepared to contain 10% Arthrospira platensis or 10% Arthrospira pacifica powder. After the feeding trial, survival was 100% in all group. Weight gain of fish reared at 24, 27, and $30^{\circ}C$ was higher than $21^{\circ}C$ group. Feed efficiency was not affected by water temperature and dietary Arthrospira sp. Daily feed intake tended to increase with water temperature. The $a^*$ value of skin coloration was affected by Arthrospira sp., but not by water temperature. Fish fed the diet containing A. pacifica powder reared at $27^{\circ}C$ had the highest $a^*$ value among the groups. Total carotenoids were highest in fish fed the diet containing A. pacifica powder reared at $21^{\circ}C$. Based on the results of this study, we conclude that 24-$30^{\circ}C$ water temperature was the optimal range for growth, and dietary inclusion of A. pacifica improved the skin redness of red- and white-colored fancy carp reared at $27^{\circ}C$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.6
• /
• pp.746-750
• /
• 1998

This experiment was conducted to investigate the water requirement of exercising sheep. Nine Merino ewes were allocated into three groups differing in water supply after exercise, group 1(G1) supplied water ad libitum, group 2 (G2) supplied with water twice a day, and group 3 (G3) supplied with water once a day. The ewes were exercised outdoors using a circular exercising machine at a speed of 5 km/h for 1 hour for 12 consecutive days. Total daily water intake (TDWI) of animals in G3 was significantly lower (p < 0.05) than that of those in G1 and G2. TDWI of the 2 later groups was not different. TDWI of G3 was about 60% of that of G1. Feed intake of G3 was significantly (p < 0.05) lower than that of the other two groups. Immediately after exercise, rectal temperature (RT) of animals in G1 was significantly (p < 0.05) lower than those in the other groups. Respiration rate (RR) of animals in all three groups was not significantly different. Faecal moisture of animals in G3 was significantly lower (p < 0.05) than those in the other groups. The results indicate that for optimum productivity sheep should be given water at least twice a day.

• Membrane Journal
• /
• v.1 no.1
• /
• pp.34-43
• /
• 1991

The relationships between affinity of membranes and optimum operation conditions were investigated in the pervaporation of water(1)/ethanol(2) mixture through cellulose acetate(CA) membranes having more affinity to water and silicone rubber(SR) membranes having more affinity to ethanol. CA and SR membranes were prepared and amount of sorption, sorption selectivity, pervaporation separation factor and pervaporation rate in both of membranes were determined and compared. The effects of downstream pressure were analyzed using Thompson diagram and the sorption and pervaporation characteristics with composition of feed and operation temperature were examined in terms of affinity, activity coefficient, plasticizing effect and activation energy of individual species. In the separation of water through CA membranes, high performance of both pervaporation separation factor (water to ethanol, $[\alpha^2_1]_{PV}$) and pervaporation rate was obtained in the conditions of low downstream pressure, middle range of feed concentration and high temperature. In the separation of ethanol through SR membranes, pervaporation separation factor(ethanol to water, $[\alpha^2_1]_{PV}$) increased with downstream pressure and decreased with concentration of ethanol in feed and operation temperature, while pervaporation rate showed opposite trends to those of ($[\alpha^2_1]_{PV}$).

• Journal of Mechanical Science and Technology
• /
• v.17 no.6
• /
• pp.896-905
• /
• 2003

A linear motor has many advantages next to conventional feed mechanisms: high transitional speed and acceleration, high control performance, and good positioning accuracy at high speed. Through the omission of a power transfer element, the linear motor shows no wear and no backlash, has a long lifetime, and is easy to assemble. A disadvantage of the linear motor is low efficiency and resultant high-temperature rise in itself and neighboring structures during operation. This paper presents the thermal behavior of the linear motor as a feed mechanism in machine tools. To improve the thermal behavior, an insulation layer is used. By placing the insulation layer between the primary part and the machine table, both the temperature difference and the temperature fluctuation in the machine table due to a varying motor load are reduced.

• Korean Membrane Journal
• /
• v.8 no.1
• /
• pp.31-35
• /
• 2006

Pervaporation of water/2,2,2-trifluoroethanol (TFEA) mixtures was performed using a NaY zeolite membrane which was prepared by a hydrothermal synthesis. Pervaporation with a zeolite membrane is one of the economic separation technologies for liquid mixtures including organic/water solutions. The effects of a TFEA feed concentration and a temperature were studied on the permeation flux and the separation factor. Not only the water flux increased significantly with the increase of the operating temperature, but also the TFEA flux through the NaY zeolite membrane rapidly increased with the increase of the temperature at the feed concentration below 0.8 mole fraction of TFEA.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.11 no.1
• /
• pp.39-44
• /
• 2015

The fracture toughness of 2.25Cr-1Mo cast steel (SA217-WC9) samples which were taken from the check valves of feed water piping of Korean Standard Nuclear Power Plant(KSNPP) was measured by Master Curve method. The measured $T_0$ reference temperature of SA217-WC9 steel was $-30^{\circ}C$. The obtained $T_0$ was compared to the derived value from Charpy impact test data following to SINTEP procedure. The heat-to-heat variation in fracture toughness of SA217-WC9 steel was observed. It was found that the low toughness of a heat of SA217-WC9 steel was attributed to the coarse MnS inclusion originated by high sulfur content as the results of microanalyses.

• Korean Journal of Environmental Biology
• /
• v.40 no.4
• /
• pp.651-659
• /
• 2022

This study was conducted to investigate the effects of different water temperatures (8, 11, 14 and 17℃) on growth, survival and hematological parameters of juvenile chum salmon(Oncorhynchus keta) for eight weeks. At the end of the experiment, at 14℃, the final body weights of the O. keta group were the highest compared to the other groups. Also, the O. keta showed a higher tendency in the 14℃ group than the 8, 11, and 17℃ groups in terms of growth performances, including specific growth rate (SGR), feed conversion ratio (FCR), feed efficiency (FE), weight gain (WG), and condition factor (CF). The survival rate (SR) was 100% at 8 and 11℃ groups, 96% at 14℃ group and 98% at 17℃ group. In the plasma components, the alanine aminotransferase (ALT) was significantly decreased at 17℃ group, whereas there was no significant change in the albumin (ALB), total protein (TP), sodium (Na⁺), potassium (K⁺) and chloride (Cl^-) levels. Among the whole-body composition of salmon, moisture, crude protein, and ash were not significantly affected by water temperature. However, crude lipid in the 8℃ group was significantly higher than in other water temperature groups. The results of this study demonstrated that the optimal temperature to stable growth performance for juvenile O. keta was 14℃.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.6
• /
• pp.847-852
• /
• 2014

The aim of this study was to investigate the effects of stocking density and water temperature in the rearing of the longtooth grouper Epinephelus bruneus. Juvenile fish [mean body weight (BW)=$6.9{\pm}1.1g$] were raised for 6 weeks, in four density groups of 0.25, 0.5, 0.75, and 1 individuals/L. There were no significant differences in weight gain (WG) or specific growth rate (SGR) among the density groups; however, both WG and SGR tended to be higher in the low density group. After 6 weeks of rearing in temperature-controlled water ($23.6{\pm}0.8^{\circ}C$) and ambient temperature water ($19.6{\pm}1.8^{\circ}C$), there were no significant differences in WG or SGR values, but both tended to be higher in the temperature controlled water. The feed efficiency (FE) and daily feed intake (DFI) and WG values were also higher in the temperature-controlled water than in the ambient temperature water. WG values were lower at lower water temperatures. The same pattern was observed for SGR, FE, and FI, all of which exhibited lower values at lower temperatures. In particular, WG, SGR, and FE values all tended to decrease at the $16^{\circ}C$ water temperature. The effects of water temperature on 1-year fish (mean BW = $387.6{\pm}30.2g$) and 3-year fish (mean BW = $1,338.3{\pm}73.8g$) were similar to those of the juvenile fish (0-year fish).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.3
• /
• pp.262-267
• /
• 2009

Two 15-week feeding trials were conducted to investigate feeding rate and feeding frequency for growth of sub-adult flounder in suboptimal water temperature ($12^{\circ}C$). In the first experiment, duplicated groups of fish (initial mean weight of 279 g) were fed a extruded pellet once a day at the different feeding rates of 0.1, 0.15, 0.2, 0.3% body weight per day (BW/d), and satiation (0.32% BW/d). Weight gain and feed efficiency were increased significantly (P<0.05) with increase in feeding rates from 0.1 to 0.3% BW/d, but there were no significant differences in weight gain and feed efficiency of fish fed the diet between 0.3% BW/d and to satiation. Crude protein content of dorsal muscle of fish fed the 0.1% BW/d diet was significantly (P<0.05) lower than that of the other groups. In the second experiment, duplicated groups of fish (initial mean weight of 281 g) were fed to apparent satiation with a extruded pellet at three different feeding frequencies (one meal every two days, one meal a day and two meals a day). Weight gain, feed efficiency and condition factor of fish fed one meal every two days were significantly (P<0.05) lower than those of fish fed one meal and two meals a day, but there were no significant differences in weight gain, feed efficiency and condition factor of fish fed between one meal and two meals a day. Based on the results of this study, optimum feeding frequency is one meal a day with satiation feeding for growth and feed efficiency of sub-adult flounder (270-350 g) in suboptimal water temperature ($12^{\circ}C$).