• The Korean Journal of Physiology and Pharmacology
• /
• v.16 no.1
• /
• pp.49-57
• /
• 2012

It has been shown that QGC isolated and purified from Rumecis folium found protective effects of gastritis and esophagitis which EXT is an ethanol extract of it. We examined acute toxicity and the general pharmacological action of QGC EXT to search for any side effects of it in rats, mice, guinea pigs, and cats. In a single dose toxicity study, QGC EXT didn't show toxicological effects in rats and mice, and the $LD_{50}$ was over 5 g/kg in both animals, and there were also no changes in weight, feed and water intake during these toxicological experimental periods. We examined the general pharmacological action on central controlled behavior responses, and peripheral organs including blood pressure, heart rate, respiration and gastrointestinal system, We found that there were no significant changes in body temperature, locomotors activity, stereotyped behaviors, sleeping time, and convulsion. In other studies, writhing reaction, normal body temperature, there did not appear to be any changes. The large intestine movement and electrical field stimulation-induced contraction was not changes by its EXT. In addition, the influences on blood pressure, heart rates, and respiration by QGC EXT were not found. These results indicate that QGC EXT may be very safe as a new drug, since its $LD_{50}$ was very high over 5 g/kg and any side effects were not found.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.12
• /
• pp.1645-1656
• /
• 2010

This study was conducted to investigate the effects of strain on broiler performance, and age at slaughter and postchilling (PC) aging time on meat quality traits. A total of 500 one-day-old chicks (250 Hubbard classic and 250 Lohman) were reared under commercial conditions. Half of the broiler birds from each strain were slaughtered at 32 days and the other half at 42 days old. At each processing day, 168 carcasses were randomly selected (84 Hubbard and 84 Lohman) and divided into groups of 28 carcasses within each strain, and aged for 0, 4 and 24 h after chilling. Average weekly body weight was comparable between strains. Feed conversion ratio was higher (p<0.05) for the Hubbard strain during the second and third week of age. Initial carcass pH was significantly (p<0.05) affected by age where younger birds (32-d-old) had lower pH values than older (41-d-old) birds. Breast temperature was higher (p<0.001) for Lohman than Hubbard at 0, 2 and 4 h of PC. Younger birds had a lower breast temperature (p<0.001) at all measured times of PC. Thaw loss, cook loss and water holding capacity were not significantly affected by strain, age or aging time. Lohman strain had more tender meat (p<0.05) than Hubbard strain, and tenderness was improved with the increase of broiler age and aging time. Meats from Hubbard were lighter and less red than those from Lohman strain where younger birds had darker color. In conclusion, strain, age at slaughter and PC aging duration are critical to breast meat quality characteristics, and 4 h of aging are required before deboning in order to obtain more tender fillets.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.7 no.4
• /
• pp.179-186
• /
• 1974

The followings are some results obtained from a series of experiments for the culture of eels from the elver stage in the laboratory from April 1973 to June 1974. 1. The optimum temperature turned out as 30t in the early stage culture. 2. The exponential curve of growth rate for a ten day period at the temperature between $20^{\circ}C$ and $30^{\circ}C$ was represented by the following equation: $$R=0.0056296\;T^{1.80740}$$ 3. The elvers and small eels that were kept improperly for a long time before this experiment also showed the same growth rate, compared with other healthful eels captured directly from the estuarine areas. 4. Those that showed retarded growth among a group of eels during the culture recovered the normal growth rate if graded out and kept in the other aquarium. 5. Feeding rate was not affected when the content of ammonia was less than 5 ppm, but it decreased by half when the content exceeds 6 ppm. 6, The elimination of fecal stuffs and uneaten dispersed feed was very important for the maintaining the water in quality.

• Fisheries and Aquatic Sciences
• /
• v.17 no.4
• /
• pp.391-401
• /
• 2014

Ten feeding trials were conducted to determine and to make the guideline for the optimum feeding rates in olive flounder Paralichthys olivaceus fed extruded pellets at various growth stages at the optimum rearing water temperature. The entire trials were grouped into four growth stages, namely the first stage of juvenile (5 and 9 g), the second stage of juvenile (20, 30, 40 and 50 g), growing (240 and 317 g) and sub-adult (384 and 525 g) stages with 2, 4, 2 and 2 feeding trials, respectively. In the first and second experiments, results indicated that the optimum feeding rates for the first stage of juvenile olive flounder weighing 5 and 9 g could be >5.17 but <5.52% and >4.44 but <4.64% body weight (BW)/day, respectively. In the third, fourth, fifth and sixth experiments, results suggested that the optimum feeding rates for the second stage of juvenile olive flounder weighing 20, 30, 40 and 50 g could be >3.47 but <3.50, >2.85 but <3.53, >2.58 but <3.04 and >2.36 but <2.50% BW/day, respectively. In the seventh and eighth experiments, results showed the optimum feeding rates for growing olive flounder weighing 240 and 317 g to be >1.03 but <1.25 and >0.85 but <1.0 % BW/day, respectively. In the ninth and tenth experiments, the optimum feeding rates in sub-adult olive flounder weighing 384 and 525 g were shown to be >0.69 but <0.7 and >0.55 but <0.8% BW/day, respectively. We will compare these results with the previous studies done by other research groups.

• Korean Journal of Food Science and Technology
• /
• v.21 no.6
• /
• pp.772-779
• /
• 1989

The effects of screw speeds and moisture contents on the physical properties of texturized extrudate from isolated soy protein were examined by using a single-screw extruder. The screw speeds and moisture contents tested were in the range of 122-334 rpm and 20-35%, respectively, and die temperature were $90-145^{\circ}C$. The texturization characteristics such as nitrogen solubility index, integrity index, chewiness, density, rehydration ratio, and lightness after rehydration were appeared to be influenced by screw speed and moisture content. As the screw speed increased and moisture content decreased, die temperature, nitrogen solubility index, integrity index, lightness before and after rehydration were increased, while chewiness, density, water content of final extrudate wee decreased. The rehydration rate was changed drastically at the feed moisture content of 30% in particular. As the moisture content decreased, the air cell size became large and its number was increased. The effects of interaction between screw speed and moisture content of raw materials on the extrudate characteristics were tested by the analysis of variance.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.112-116
• /
• 2013

Surface modification of montmorillonite (MMT) with 3-glycidoxypropyl trimethoxysilane (3GTO) in mild methanol/water mixture has been investigated in detail. The influence of reaction conditions (including silane concentration in feed, reaction time and reaction temperature) on the grafting amount and yield of silane, and further on the grafting pattern of silanes was studied by thermogravimetric analysis, elemental analysis, X-ray diffraction (XRD) and BET. Higher silane concentration, longer reaction time and higher reaction temperature are all benefit to higher grafting amount. When the grafting reaction was performed with 3 mmol/g silane concentration, at $90^{\circ}C$ for 24 h, the grafted amount and yield of silane reached 1.4443 mmol/g and 30%, respectively. Based on the XRD and BET data analysis, a speculation that the grafting pattern of silanes was concentration dependence was proposed.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3275-3285
• /
• 2021

A Nuclear Power Plant (NPP) is a complex dynamic system-of-systems with highly nonlinear behaviors. In order to control the plant operation under both normal and abnormal conditions, the different systems in NPPs (e.g., the reactor core components, primary and secondary coolant systems) are usually monitored continuously, resulting in very large amounts of data. This situation makes it possible to integrate relevant qualitative and quantitative knowledge with artificial intelligence techniques to provide faster and more accurate behavior predictions, leading to more rapid decisions, based on actual NPP operation data. Data-driven models (DDM) rely on artificial intelligence to learn autonomously based on patterns in data, and they represent alternatives to physics-based models that typically require significant computational resources and might not fully represent the actual operation conditions of an NPP. In this study, a feed-forward backpropagation artificial neural network (ANN) model was trained to simulate the interaction between the reactor core and the primary and secondary coolant systems in a pressurized water reactor. The transients used for model training included perturbations in reactivity, steam valve coefficient, reactor core inlet temperature, and steam generator inlet temperature. Uncertainties of the plant physical parameters and operating conditions were also incorporated in these transients. Eight training functions were adopted during the training stage to develop the most efficient network. The developed ANN model predictions were subsequently tested successfully considering different new transients. Overall, through prompt prediction of NPP behavior under different transients, the study aims at demonstrating the potential of artificial intelligence to empower rapid emergency response planning and risk mitigation strategies.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.3
• /
• pp.83-95
• /
• 2022

This study aims to present primary data for habitat restoration and artificial breeding conditions of L. unmunsana by identifying the habitat conditions and the larvae's food sources. In order to investigate the habitat characteristics of the adult L. unmunsana and land snails, which are the primary food sources for the larvae, field surveys were conducted on a total of 10 habitats in south-central parts of Korea including Sanseongcheon, Jeonju. The results revealed that the L. unmunsana habitat in the Sanseongcheon area had a broadleaf forest with a multi-layered vegetation structure, adjacent water features, and the north/northeast/northwest slopes with little effect of artificial lighting. The adult L. unmunsana in the Sanseongcheon area appeared from the end of May to the end of June, and was especially intensively observed around the middle of June. The most active time was from 23:30 to 00:30 with a temperature range of 19~22℃ and higher than 80% humidity. The peak count of the observed adults L. unmunsana was a total of 774 on June 11, 2021. In the case of land snails, 11 families and 23 species were observed in 10 habitats of L. unmunsana, and Euphaedusa fusaniana was the most extensive and the most observed in the five survey areas. The land snails of L. unmunsana habitats are mostly found under the organic layers of leaves and a fallen tree branch in broadleaf forests, where a thick organic material layer buffers temperature changes and provides high humidity for various snails. These habitat conditions are suitable for the larva of L. unmunsana and land snails to inhabit, feed, hide and hibernate.

• Journal of Animal Science and Technology
• /
• v.65 no.1
• /
• pp.113-131
• /
• 2023

The objective of this study was to investigate the effect of supplementing clay minerals and organic chromium in feed on broiler chicken under heat stress (HS). A total of 90 one-day-old broiler chicken (Arbor Acres) with an initial body weight of 45.0 ± 0.2 g were assigned to five treatment groups (six replications, three birds each cage): 1) NC group, basal diet under room temperature environment; 2) PC group, basal diet under high temperature (HT) environment; 3) ILT group, basal diet + 1% illite + HT; 4) ZLT group, basal diet + 1% zeolite + HT; 5) OC group, basal diet + 400 ppb/kg organic chromium + HT. The ILT and ZLT groups had significantly higher body weight than the PC group in 4 weeks. Apparent total tract digestibility of gross energy was increased in the ILT, ZLT, and OC groups compared to the PC group. The NC group had lower foot-pad dermatitis score than other groups. Escherichia coli population in the cecum and feces was decreased in the ZLT group than in the PC group. Lactobacillus in cecum and feces was significantly increased in the ZLT group than in the PC group. Regarding blood profiles, blood cortisol was decreased in the NC and ILT groups compared to the PC group. Water holding capacity and pH were increased in the ZLT group than the PC group. In conclusion, according to the results of growth performance, nutrients digestibility, bacteria counts, and meat characteristics, supplementation of the ZLT in broiler diet can alleviate HS.

• Clean Technology
• /
• v.17 no.2
• /
• pp.166-174
• /
• 2011

The xAl-yCe oxide catalysts with different mol ratios of Al/(Al+Ce) were prepared by a co-precipitation method and Pt supported on xAl-yCe oxide catalysts were synthesized by an incipient wetness impregnation method. The catalysts were characterized by X-ray Diffraction (XRD), $N_2$ sorption, and $H_2$/CO-temperature programmed reduction ($H_2$/CO-TPR) to correlate with catalytic activities in co oxidation. Among the catalysts studied here, Pt/1Al-9Ce oxide catalyst showed the highest activity in dry and wet reaction conditions and the catalytic activity showed a typical volcano-shape curve with respect to Al/(Al+Ce) mol ratio. When the presence of 5% water vapor in the feed, the temperature of $T_{50%}$ was shifted ca. $30^{\circ}C$ to lower temperature region than that in dry condition. From CO-TPR, the desorption peak of $CO_2$ on Pt/1Al-9Ce oxide catalyst showed the highest value and well correlated the catalytic performance. It indicates that the Pt/1Al-9Ce oxide catalyst has a large amount of active sites which can be adsorbed by co and easy to supplies the needed oxygen. In addition, the amount of pentacoordinated $Al^{3+}$ sites obtained through $^{27}Al$ NMR analysis is well correlated the catalytic performance.