• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.1
• /
• pp.107-113
• /
• 2012

Pollutants in aquaculture system effluent mostly originated from solid wastes including uneaten feed and excreta of cultured species. In this research, DAF(Dissolved Air Flotation) unit is suggested as an integrated solid control unit especially as a form of IIBG(Inline Injection Bubble Generation) process in aquaculture system. Solid removal performance of DAF unit was examined under various operation and salinity conditions with turbidity and suspended solid. Solid waste removal efficiencies were found to be affected by operation conditions including saturator pressure, recycle ratio, coagulant concentration. Solid removal efficiency was higher under higher saturator pressure and recycle ratio under which condition larger number of bubbles is generated. Coagulant is thought to have important role in creating bubble-particle aggregate by showing better removal efficiency with higher concentration. However higher saline water showed less effectiveness in removing solids by DAF(IIBG). Application of DAF(IIBG) process also showed additional effect in phosphate removal and DO(Dissolved Oxygen) supply. Phosphate existed in polluted water was removed up to 46% after treatment, which is thought to attribute to aluminium phosphate precipitation. And DO concentration was found to increase over 50% of initial saturation concentration after the injection of micro-bubbles. Through experiments on solid removal from aquaculture effluent, DAF(IIBG) process is estimated to be effective solid control method. This property can help aquaculture system being installed and operated simply and effectively.

• Fisheries and Aquatic Sciences
• /
• v.7 no.2
• /
• pp.76-83
• /
• 2004

To supply fresh and quality quarantined seafood in live seafood specialty restaurants, facilities for short-term culture or holding of live marine fish and shellfish are a necessity. In this study, the performance of a simple recirculating aquarium system for the culture and holding of marine fish was evaluated. The aquarium system consisted of a culture tank, a foam fractionator for solids removal, and a Styrofoam bead filter for nitrification and solids trapping. In the first trial, the aquarium was stocked with a total of 12 kg Korean rockfish, which were fed approximately $0.5\%$ of the total fish body weight daily. During the 2-month culture period, total ammonia nitrogen (TAN) and nitrite nitrogen $(NO_2-N)$ concentrations remained below 1mg/L and 2mg/L, respectively. The chemical oxygen demand (COD) fluctuated between 13.6 and 31.2 mg/L on selected sampling days. The total suspended solids (TSS) removed by the foam fractionator was between 2.7 and 4.6g daily. The Styrofoam bead filter not only reduced TAN and $NO_2-N$ in the culture tank water, but also trapped solids equivalent to 8.3-26.7\% of the weight of feed supplied. In Trial 2, 30kg of live fish were held in the aquarium without feeding for a 24-hour period and the water quality parameters were monitored. TAN and $NO_2-N$ concentrations first increased and then decreased to around 0.3mg/L. These results demonstrate that the recirculating aquarium system is a functional option for the short-term culture or holding of marine fish.

• Journal of Korean Elementary Science Education
• /
• v.26 no.2
• /
• pp.149-160
• /
• 2007

This study was conducted to investigate the relationships between the patterns of elementary school teachers' explanations and the patterns of students' questions types on scientific phenomena. for the purposes of this study, we collected questions related to scientific phenomena from 255 $3rd{\sim}6th$ students in 2 elementary schools. Classifying the students' questions collected, 20 representative questions for each type were selected. Data regarding teachers' scientific explanation from 62 teachers of 3 elementary schools were also collected. The results of the analysis of the questions for each science field show that the students in the 3rd, 4th, and 5th grades have the most questions regarding biology, and those in the 6th grade have more questions regarding earth science. Regarding question types, object exploration questions and explican exploration questions formed the majority. Moreover, the higher the students' grades, a decrease in the number of conjectural questions and an increase in the number of causal questions were observed. As a result of the analysis of the teachers' explanation, the following explanation types could be discerned; conjecture, hypothesis, prediction, teleological explanation, information given to feed exploration questions, as well as verification and information supply fer verification purposes. There were 4 kinds of relationships between question types and explanation types. One was the explanation fitting to each question type, a second was the explanation with additional content than the question required, a third was where the explanation was inappropriate to the question, and a forth was where the teacher responded that they "don't know." This study, investigating the relationships between questioning as a scientific inquiry process and explanation, will help to promote discussion regarding science classes in elementary school.

• Ocean and Polar Research
• /
• v.35 no.4
• /
• pp.323-349
• /
• 2013

The mud shrimp Upogebia major (Upogebiidae: Decapoda: Crustacea) is a common species on muddy and sandy mud tidal flats in the west coast of Korea. They reside in Y-shaped burrows that can extend up to more than 2 meters below the sediment surface. They feed on suspended detritus carried into their burrow by the beating of their pleopods and captured by their hairy first two pairs of thoracic legs. Mud shrimp burrows provide a habitat for a variety of small organisms such as crabs, shrimps, polychaetes, and mollusks. Ovigerous females are observed from December to May. Females deposit eggs only once per breeding season. They start hatching in March and the pelagic larvae of first zoea appear in March and April, followed by benthic settlement in May. Growth over the first year is rapid, and females deposit their first eggs in the third breeding season, 31 months after their settlement. Adult shrimps live for 4~5 years. Depth of the burrow increases with body length. The deep burrows provide refuge from predators and physical stress, allowing the shrimps to survive for a long time. The mud shrimps supply oxygen-rich water to their deep burrows, and exert a great influence on the structure and metabolism of the tidal flat benthic community. However, recently this type of mud shrimp has posed a serious threat to the Korean clam industry along the west coast of Korea. The extensive burrowing shrimp populations suddenly invaded the tidal flats from 2010 where the clams (Ruditapes philippinarum) are raised. As a consequence, clam production has decreased by about 10% over the past three years in some Korean clam beds. Therefore, the objective of this study is to review the biology of this mud shrimp in order to seek solutions to control the burrowing of these shrimps.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.3
• /
• pp.51-59
• /
• 2009

This paper presents the design of continuous-time sigma-delta modulator for acoustic sensor. The feedforward structure without summing block is used to reduce power consumption of sigma-delta modulator. A high-linearity active-RC filter is used to improve resolution of sigma-delta modulator. Excess loop delay problem in conventional continuous-time sigma-delta modulators is solved by our proposed architecture. A low power, high resolution fourth-order continuous-time sigma-delta modulator with 1-bit quantization was realized in a 0.13-${\mu}m$ 1-Poly 8-metal CMOS technology, with a core area of $0.58\;mm^2$. Simulation results show that the modulator achieves 91.3-dB SNR over a 25-kHz signal bandwidth with an oversampling ratio of 64, while dissipating $290{\mu}W$ from a 3.3-V supply.

• Journal of Plant Biotechnology
• /
• v.36 no.3
• /
• pp.197-201
• /
• 2009

The food self-support rate on the basis of cereals in Korea is approximately 27%, which will threaten the national food security. The dramatic increase in population accompanied by rapid industrialization in developing countries has caused imbalances in the supply of food and energy. To cope with these global crises over food and energy supplies as well as environmental problems, it is urgently required to develop new environmentally friendly industrial crop varieties to be grown on marginal lands including desertification areas for sustainable development. Sweetpotato (Ipomoea batatas (L.) Lam.) ranks seventh in annual production among food crops in the world. Its wide adaptability on marginal lands and rich nutritional content provide a high potential for preventing malnutrition and enhancing food security in the developing countries. In addition, sweetpotato can be developed as a bioreactor to produce valuable industrial materials including bio-ethanol, functional feed and antioxidants by molecular breeding. In this respect, we focus on the molecular breeding of sweetpotato with multi-function on marginal lands. The strategies for development of environmentally friendly industrial sweetpotato will be introduced and discussed.

• Korean Journal of Veterinary Service
• /
• v.42 no.4
• /
• pp.275-278
• /
• 2019

Blindness was observed in five calves born from cattle fed only a commercial feed of growing stage and dried rice straws for about two years in a farm in Gyeongsangbuk-do province. Three of them died within a month after birth, and a body and sera of his mother and other 19 cattle were submitted for diagnosis. At necropsy, the calf was very weak and filled with cerebrospinal fluid in the cerebrum. Any histopathological lesion including atrophy of death of optic nerve cells was not observed, but the irregular proliferation such as lace pattern of choroidal cells and lymphocytic infiltration just below choroid was observed. No pathogen was detected as a result of the etiological tests on the internal organs of calves and bloods. In addition, the levels of serum vitamin A in different affected and his mother cattle were all lower than normal. Finally, we determined this case as an encephalopathy caused by maternal vitamin A deficiency in a calf. This report is an extreme example of how important it is to supply adequate s diets and a good quality of hay for each stage of growth in cattle.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.79-79
• /
• 1999

The varous techniques for fabrication of si or metal tip as a field emission electron source have been reported due to great potential capabilities of flat panel display application. In this report, 240nm thermal oxide was initially grown at the p-type (100) (5-25 ohm-cm) 4 inch Si wafer and 310nm Si3N4 thin layer was deposited using low pressure chemical vapor deposition technique(LPCVD). The 2 micron size dot array was photolithographically patterned. The KOH anisotropic etching of the silicon substrate was utilized to provide V-groove formation. After formation of the V-groove shape, dry oxidation at 100$0^{\circ}C$ for 600 minutes was followed. In this procedure, the orientation dependent oxide growth was performed to have a etch-mask for dry etching. The thicknesses of the grown oxides on the (111) surface and on the (100) etch stop surface were found to be ~330nm and ~90nm, respectively. The reactive ion etching by 100 watt, 9 mtorr, 40 sccm Cl2 feed gas using inductively coupled plasma (ICP) system was performed in order to etch ~90nm SiO layer on the bottom of the etch stop and to etch the Si layer on the bottom. The 300 watt RF power was connected to the substrate in order to supply ~(-500)eV. The negative ion energy would enhance the directional anisotropic etching of the Cl2 RIE. After etching, remaining thickness of the oxide on the (111) was measured to be ~130nm by scanning electron microscopy.

• Journal of IKEEE
• /
• v.19 no.1
• /
• pp.87-93
• /
• 2015

In this paper, a $145{\mu}W$, 87dB SNR, Low power 3rd order Sigma-Delta Modulator with Op-amp sharing is proposed. Conventional architecture with analog path and digital path is improved by adding a delayed feed -forward path for disadvantages that coefficient value of the first integrator is small. Proposed architecture has a larger coefficient value of the first integrator to remove the digital path. Power consumption of proposed architecture using op-amp sharing is lower than conventional architecture. Simulation results for the proposed SDM designed in $0.18{\mu}m$ CMOS technology with power supply voltage 1.8V, signal bandwidth 20KHz and sampling frequency 2.8224MHz shows SNR(Signal to Noise Ratio) of 87dB, the power consumption of $145{\mu}W$.

• Journal of Ecology and Environment
• /
• v.41 no.7
• /
• pp.191-201
• /
• 2017

Background: Limited availability of corn stover due to the competing uses (organic manure, animal feed, bio-materials, and bioenergy) presents a major concern for its future in the bio-economy. Furthermore, biomass research has exhibited different results due to the differences in the supply of enzymes and dissimilar analytical methods. The effect of the two leading pretreatment techniques (dilute acid and alkaline) on glucose yield from three corn stover fractions (cob, stalk, and leaf) sourced from a single harvest in Uganda were studied at temperatures 100, 120, 140, and $160^{\circ}C$ over reaction times of 5, 10, 30, and 60 min. Results: From this study, the highest glucose concentrations obtained from the dilute acid (DA) pretreated cobs, stalks, and leaves were 18.4 g/L (66.8% glucose yield), 16.2 g/L (64.1% glucose yield), and 11.0 g/L (49.5% glucose yield), respectively. The optimal pretreatment settings needed to obtain these yields from the DA pretreated samples were at a temperature of $160^{\circ}C$ over an incubation time of 30 min. The highest glucose concentrations obtained from the alkaline (AL) pretreated cobs, stalks, and leaves were 24.7 g/L (81.73% glucose yield), 21.3 g/L (81.23% glucose yield), and 15.0 g/L (51.92% glucose yield), respectively. To be able to achieve these yields, the optimal pretreatment settings for the cobs and stalks were $140^{\circ}C$ and for a retention time of 30 min, while the leaves require optimal conditions of $140^{\circ}C$ and for a retention time of 60 min. Conclusions: The study recommends that the leaves could be left on the field during harvesting since the recovery of glucose from the pretreated cobs and stalks is higher.