• Membrane and Water Treatment
• /
• 제7권4호
• /
• pp.313-325
• /
• 2016

South Africa recognises piped water as the main source of safe drinking water supply. Remote areas do not have access to this resource and they rely solely on surface water for survival, which exposes them to waterborne diseases. Interim point of use solutions are not practiced due to their laboriousness and alteration of the taste. Bio-ultra low pressure driven membrane system has been noted to be able to produce stable fluxes after one week of operation; however, there is limited literature on South African waters. This study was conducted on three rivers namely; Umgeni, Umbilo and Tugela. Three laboratory systems were setup to evaluate the performance of the technology in terms of producing stable fluxes and water that is compliant with the WHO 2008 drinking water guideline with regards to turbidity, total coliforms and E.coli. The obtained flux rate trends were similar to those noted in literature where they are referred to as stable fluxes. However, when further comparing the obtained fluxes to the normal dead-end filtration curve, it was noted that both the Umbilo and Tugela Rivers responded similarly to a normal dead-end filtration curve. The Umgeni River was noted to produce flux rates which were higher than those obtainable under normal dead-end. It can be concluded that there was no stabilisation of flux noted. However, feed water with low E.coli and turbidity concentrations enhances the flux rates. The technology was noted to produce water of less than 1 NTU and 100% removal efficiency for E.coli and total coliforms.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.721-724
• /
• 2011

터보펌프에서 발생 가능한 cavitation을 동반하지 않으면서 추진제를 요구하는 압력과 유량으로 연소기에 공급하기 위해서는 추진제 탱크에 저장된 추진제를 가압하는 시스템이 필요하다. 가압시스템은 선가압과 주가압으로 분류할 수 있으며, 본 연구에서는 주가압 시스템에 대해서만 언급한다. 추진제탱크 가압 방식에는 가압가스 생성방법과 공급 방법으로 나눌 수 있으며, 가압가스 생성방법으로는 비활성가스 및 극저온 산화제를 기화시켜 추진제탱크에 공급하는 방법이 있다. 본 연구에서는 가압시스템의 분류와 가압 방식에 따른 장단점을 비교하였으며, 특히 발사체에서 사용하고 있는 가압방식 중에서 임펄스 제어방식의 원리와 가압시스템의 특성을 기술한다. 또한 가압시스템의 구성요소인 열교환기의 형상과 구조 및 각 열교환기의 특징에 대하여 설명한다. 본 자료는 발사체 개발단계에서 가압시스템의 기본요구조건 도출과 개념설계 단계에서 활용할 수 있다.

• Membrane and Water Treatment
• /
• 제8권3호
• /
• pp.279-292
• /
• 2017

This study was aimed at ultrafiltration (UF) as a pretreatment before reverse osmosis (RO) within the scheme of hybrid reverse osmosis-multistage flush (RO-MSF) desalination. Seawater at elevated temperature (after MSF heat-exchangers) was used as a feed in this process. The pretreatment system was represented as a set of functionally-linked technological segments such as: UF filtration, backwashing, chemical- enhanced backwashing, cleaning, waste disposal, etc. The process represents the sequences of operating cycles. The cycle, in turn, consists of the following unit operations: filtration, backwashing and chemical-enhanced backwashing (CEB). Quantitative assessment was based on the following indicators: normalized permeability, transmembrane pressure, specific energy and water consumption, specific waste generation. UF pre-treatment is accompanied by the following waste streams: $W1=1.19{\times}10$ power of $-2m^3$ (disposed NaOCl with 0.0044% wt.)/$m^3$ (filtrate); $W2=5.95{\times}10$ power of $-3m^3$ (disposed $H_2SO_4$ with 0.052% wt.)/$m^3$(filtrate); $W3=7.26{\times}10$ power of $-2m^3$ (disposed sea water)/$m^3$ (filtrate). Specific energy consumption is $1.11{\times}10$ power of $-1kWh/m^3$ (filtrate). The indicators evaluated over the cycles with conventional (non-chemical) backwashing were compared with the cycles accompanied by CEB. A positive impact of CEB on performance indicators was demonstrated namely: normalized UF resistance remains unchanged within the regime accompanied by CEB, whereas the lack of CEB results in 30% of its growth. Those quantitative indicators can be incorporated into the target function for solving different optimization problems. They can be used in the software for optimisation of operating regimes or in the synthesis of optimal flow- diagram. The cycle characteristics, process parameters and water quality data are attached.

• Environmental Engineering Research
• /
• 제13권1호
• /
• pp.19-27
• /
• 2008

Simultaneous removal of ternary gases of $NH_3$, $H_2S$ and toluene in a contaminated air stream was investigated over 180 days in a biofilter. A commercially available inorganic/polymeric composite chip with a large void volume (bed porosity > 0.80) was used as a microbial support. Multiple microorganisms including Nitrosomonas and Nitrobactor for nitrogen removal, Thiobacillus thioparus (ATCC 23645) for $H_2S$ removal and Pseudomonas aeruginosa (ATCC 15692), Pseudomonas putida (ATCC 17484) and Pseudomonas putida (ATCC 23973) for toluene removal were used simultaneously. The empty bed residence time (EBRT) ranged from 60 - 120 seconds and the inlet feed concentration was $0.0325\;g/m^3-0.0651\;g/m^3$ for $NH_3$, $0.0636\;g/m^3-0.141\;g/m^3$ for $H_2S$, and $0.0918\;g/m^3-0.383\;g/m^3$ for toluene, respectively. The observed removal efficiency was 2% - 98% for $NH_3$, 2% - 100% for $H^2S$, and 2% - 80% for toluene, respectively. Maximum elimination capacity was about $2.7\;g/m^3$/hr for $NH_3$, > $6.4\;g/m^3$/hr for $H_2S$ and $4.0\;g/m^3$/hr for toluene, respectively. The inorganic/polymeric composite carrier required 40 - 80 days of wetting time for biofilm formation due to the hydrophobic nature of the carrier. Once the surface of the carrier was completely wetted, the microbial activity became stable. During the long-term operation, pressure drop was negligible because the void volume of the carrier was two times higher than the conventional packing materials.

• 멤브레인
• /
• 제13권4호
• /
• pp.239-245
• /
• 2003

본 연구에서는 은-고분자 전해질 막에서의 프로필렌/프로판에 대한 순수 기체 선택도 (${\approx}10,000$)와 혼합기체 선택도(${\approx}40$)의 큰 차이의 원인을 규명하였다. 먼저 기체 공급 조건이 혼합기체의 투과도와 분리 성능에 미치는 영향을 고찰하였다. 프로필렌의 농도가 감소함에 따라 고분자 전해질 막을 통한 프로필렌의 투과도는 감소하고, 프로판의 투과도는 증가를 하였으며, 그 결과 프로판/프로필렌의 선택도가 감소하였다. 이는 고분자 전해질막의 프로필렌에 의한 가소화에 의한 것임을 실험적 결과 및 수학적 모델에 의해서 확인하였다. 또한, 압력과 무관한 투과도를 사용하였을 때의 이론적 계산에 의한 막 분리 성능은 실험치와 비슷하게 나왔음을 알 수 있었다.

• Journal of Acupuncture Research
• /
• 제24권1호
• /
• pp.165-177
• /
• 2007

Objectives : This study anus to investigate the effects of Rosa Rugosae Radix (RU) herbal acupuncture on the metabolic syndrome in high-fat diet-fed mice. Methods : The experimental groups were fed with high-fat diet (HFD) for 8 weeks to induce metabolic syndrome. During the induction of metabolic syndrome, RU herbal acupuncture at a dosage of 50 mg/kg was carried out on the point of Sinsu(BL23) every day to measure the body weight, feed efficiency, blood glucose levels, insulin resistance index, lipid levels, blood pressure, and weight of liver and adipose tissues (brown adipose tissue from interscapular fat and white adipose tissue from epididymal fat). And after five weeks' induction of metabolic syndrome, RU herbal acupuncture was also performed for 6 weeks to measure the body weight and blood glucose levels. Results: 1. RU herbal acupuncture inhibited increasing body weight and blood glucose levels, with improved insulin resistance. 2. RU herbal acupuncture inhibited increasing levels of total cholesterol, LDL-cholesterol and free fatty acid, while increased HDL-cholesterol levels. 3. RU herbal acupuncture activated anti-hypertensive action. 4. RU herbal acupuncture inhibited increasing weight of white adipose tissues, but not in brown adipose tissues and liver. 5. RU herbal acupuncture lowered blood glucose levels and inhibited increasing body weight in metabolic syndrome-induced ICR mice. Conclusion : Rosa Rugosae Radix (RU) herbal acupuncture showed effectiveeness in prevention and management of metabolic syndrome in clinical application.

• 상하수도학회지
• /
• 제32권4호
• /
• pp.317-324
• /
• 2018

SWRO-PRO hybrid desalination technology is recently getting more attention especially in large desalination markets such as USA, Middle East, Japan, Singapore, etc. because of its promising potential to recover a considerable amount of osmotic energy from brine (a high-concentration solution of salt, 60,000 - 80,000 mg/L) and also to minimize the impact of the discharged brine into a marine ecosystem. By the research and development of the core technologies of the SWRO-PRO desalination system in a national desalination research project (Global MVP) supported by Ministry of Land, Infrastructure, and Transport (MOLIT) and Korea Agency for Infrastructure Technology Advancement (KAIA), it is anticipated that around 25% of total energy consumption rate (generally 3 to $4kWh/m^3$) of the SWRO desalination can be reduced by recovering the brine's osmotic energy utilizing wastewater treatment effluent as a PRO feed solution and an isobaric pressure exchanger (PX, ERI) as a PRO energy converter. However, there are still several challenges needed to be overcome in order to ultimately commercialize the novel SWRO-PRO process. They include system optimization and integration, development of efficient PRO membrane and module, development of PRO membrane fouling control technology, development of design and operation technology for the system scaling-up, development of diverse business models, and so on. In this paper, the current status and progress of the pilot study of the newly developed SWRO-PRO hybrid desalination technology is discussed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.79-79
• /
• 1999

The varous techniques for fabrication of si or metal tip as a field emission electron source have been reported due to great potential capabilities of flat panel display application. In this report, 240nm thermal oxide was initially grown at the p-type (100) (5-25 ohm-cm) 4 inch Si wafer and 310nm Si3N4 thin layer was deposited using low pressure chemical vapor deposition technique(LPCVD). The 2 micron size dot array was photolithographically patterned. The KOH anisotropic etching of the silicon substrate was utilized to provide V-groove formation. After formation of the V-groove shape, dry oxidation at 100$0^{\circ}C$ for 600 minutes was followed. In this procedure, the orientation dependent oxide growth was performed to have a etch-mask for dry etching. The thicknesses of the grown oxides on the (111) surface and on the (100) etch stop surface were found to be ~330nm and ~90nm, respectively. The reactive ion etching by 100 watt, 9 mtorr, 40 sccm Cl2 feed gas using inductively coupled plasma (ICP) system was performed in order to etch ~90nm SiO layer on the bottom of the etch stop and to etch the Si layer on the bottom. The 300 watt RF power was connected to the substrate in order to supply ~(-500)eV. The negative ion energy would enhance the directional anisotropic etching of the Cl2 RIE. After etching, remaining thickness of the oxide on the (111) was measured to be ~130nm by scanning electron microscopy.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권9호
• /
• pp.1239-1244
• /
• 2000

In order to investigate the effect of incorporation of thermally processed cereal (maize) grain and differently degradable protein sources in the calf starter, twenty four newly born crossbred $(Bos\;taurus{\times}Bos\;indicus)$ calves were assigned at random to six diets in a $3{\times}2$ factorial design involving three protein sources viz. groundnut meal (GN), cottonseed meal (CS) and meat and bone meal (MB), each along with two differently processed grain, namely ground raw (R) and pressure cooked (P) maize. The corresponding calf starters with green oats (Avena sativa) were given free-choice from 14 d onwards till the end of the 90 d experimental feeding. A restricted milk diet was fed till the age of weaning at 60 d. Total DM intake was not affected by cereal or protein sources. However, daily intake of DM (59.23 vs 66.45 g) and CP (12.38 vs 14.10 g) per kg $W^{0.75}$ was reduced (p<0.05) due to cereal processing. Better (p<0.05) feed and protein efficiencies after weaning and during entire period in calves fed processed maize resulted in a trend of higher $(p{\leq}092)$ growth rate especially when GN was the source of protein. In comparison among protein sources, calves fed MB diets tended to grow faster $(p{\leq}098)$ concurrent with a higher CP intake before weaning. It is thus evident that thermal processing of maize in the calf starter seems to improve calf performance. Moreover, results indicated that feeding of protein and starch sources of matching ruminal degradability may prove beneficial for early growth of crossbred calves.

• 한국물환경학회지
• /
• 제29권5호
• /
• pp.641-647
• /
• 2013

We installed mesocosms including zooplankton, fishs, artificial marshy land and aquatic macrophytes in Kyoungan stream to study the reduction effects of algae from Sep. 16 to Oct. 28, 2011. The control tendency of phytoplankton taxa was compared by analyzing community structure and dominant species in each mesocosm. Under the condition where Bluegill was absent, Daphnia similoides showed good effect of algal control since it has large food area and has high grazing pressure. Bluegill selectively preys upon large zooplankton, Daphnia similoides, as it also preys on small zooplanktons that flow in. In condition that Bluegill was absent, Daphnia similoides preyed selectively large phytoplankton (Cryptomonas ovata). Due to the shading of light, removal of nutrients and providing refuge for small zooplanktons, aquatic macrophytes and artificial marshy land showed high level of algal control. In corrals with aquatic macrophytes and artificial marshy land, the dominancy of genus Coelastrum and Pediastrum, which are difficult for small zooplanktons to feed on, relatively increased. In conclusion, under conditions of small number of predators such as Bluegill, Daphnia similoides is thought to be useful in algal bloom; however, when lots of predators are present, using small sized zooplanktons along with artificial marshy land and aquatic macrophytes is thought to be more useful than using large zooplanktons.