• 전기학회논문지
• /
• 제60권5호
• /
• pp.1011-1016
• /
• 2011

This paper presents a robust current controller for a surface-mounted permanent magnet synchronous motor(SPMSM) by using a PI observer. The decoupling PI(proportional-integral) controller combined with an additional feed-forward compensation has been used for the current controller. The classical feed-forward compensation using velocity information and system parameters is not expected to achieve a robust performance against parameter uncertainties. This paper has adopted a PI observer for the feed-forward compensation to cope with parameter uncertainties without using velocity information. A simple PI observer has been designed to compensate the disturbances that represent velocity coupled terms and parameter uncertainties. Experimental results as well as computer simulations with 630W SPMSM confirm that the proposed approach can deal with the effects of the disturbance and improve the control performance.

• 전력전자학회논문지
• /
• 제7권5호
• /
• pp.413-418
• /
• 2002

본 연구는 관성의 변화에 견실한 피드포워드 적응 위치제어기를 제안한다. 제안된 피드포워드 적응 위치제어기는 PI 위치제어기에 피드포워드와 기준모델 적응제어기를 추가한 구조를 가진다. 제어기의 특징은 과도상태에서 적응제어기가 위치오차와 기준모델의 속도 정보를 이용하여 피드포워드 이득을 조정한다. 이것은 과도응답 특성을 향상시키고, 정상상태의 수렴 시간을 개선시킨다. 위치 오차에 속도의 정보를 받아들여 기존의 Pl 위치제어 및 기준모델 적응제어에 비하여 속응성이 우수하다. 그리고, 적응제어기에 규준화 함수를 사용하여 입력크기에 대해 출력신호가 일정한 응답특성을 가지도록 하였다. 시뮬레이션을 통하여 제안된 피드포워드 적응 위치제어기 동작의 타당성을 보였다.

• 한국정밀공학회지
• /
• 제31권10호
• /
• pp.905-911
• /
• 2014

A Loss-in-Weight (LIW) feeder, a type of automated measuring device, is a continuous feeder used in many mass production industries. Due to its versatility, there have been constant demands of LIW feeders in food production supply lines as well as chemical and pharmaceutical industries. In this paper, the process of designing a LIW feeder system with better performance will be examined and compared with commercial products. This system is characterized by low pass Butterworth filter and feed forward PI control. The filter is for noise disposal caused by dynamic condition of a LIW feeder. The feed forward PI control, based on linearity feature of feeders, is adequate for stable driving of the system. At the end, a possible evaluation method of LIW system will be proposed to verify the specific achievement of this paper.

• Journal of Power Electronics
• /
• 제14권5호
• /
• pp.1047-1056
• /
• 2014

In most grid-connected inverters (GCI) with an LCL filter, since the design of both the LCL filter and the controller is done separately, considerable tuning efforts have to be exerted when compared to inverters using an L filter. Consequently, an integrated co-design of the filter and the controller for an LCL-type GCI is proposed in this paper. The control strategy includes only a PI current controller and a proportional grid voltage feed-forward controller. The capacitor is removed from the LCL filer and the design procedure starts from an L-type GCI with a PI current controller. After the PI controller has been settled, the capacitor is added back to the filter. Hence, it introduces a resonance frequency, which is identified based on the crossover frequencies to accommodate the preset PI controller. Using the proposed co-design method, harmonic standards are satisfied and other practical constraints are met. Furthermore, the grid voltage feed-forward control can bring an inherent damping characteristic. In such a way, the good control performance offered by the original L-type GCI and the sharp harmonic attenuation offered by the latter designed LCL filter can be well integrated. Moreover, only the grid current and grid voltage are sensed. Simulation and experimental results verify the feasibility of the proposed design methodology.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권5호
• /
• pp.503-511
• /
• 1997

In 3 phase induction motor control system, the speed control using the load torque observer becomes robust against disturbances by means of a feed-forward control of the estimated load torque component. In case of variation of inertia moment, the estimated load torque has error because the observer uses the nominal inertia to estimate the load torque. And so, it is difficult to obtain good speed control characteristics. This paper has two study target strategy. First, we executes feed-forward control with the load torque observer when motor inertia has nominal value and compare it with conventional PI con¬trol. The second strategy estimates inertia moment error using the load torque observer when inertia moment change. The proposed two strategy is confirmed through the computer simulations and the experimental implementations by TMS320C31 microprocessor.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1088-1092
• /
• 2003

This paper presents a combined lookup table technique and PI-type controller. The purpose of the designed controller is applied to control the nonlinear system as thermal process. The proposed controller is easy and convenient to design based on a commercial controller. The performances of the proposed controller were studied using the thermal plant model under temperature control. The experimental results included demonstrate the good performance of the proposed controller.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.560-563
• /
• 2000

In this paper we proposed AC/DC boost converter to improve input current harmonic reduction in TIG welder. The proposed harmonic reduction circuit with UC2854AN acting on constant switching frequency average current control has a three-loop control structure : the inner current loop the line voltage feed-forward loop and th outer voltage loop. Also we applied the constant current strategy on full bridge IGBT inverter to stabilized the output current using the analog PI controller. To demonstrate the practical significance of the proposed methods some simulation studies and experimental results are presented.

• 한국산업융합학회 논문집
• /
• 제18권1호
• /
• pp.1-9
• /
• 2015

This research dealt with a two-degree-of-freedom controller which was used for 2-dimensional force generator based on an linear motor. The gain margin of the controller may be reduced when the time constant is near to the sampling time of a discrete controller. In case of low gain controller, it cannot satisfy the control performance. A two-degree-of-freedom controller based on PI-control was proposed. It can manage performance and stability respectively. It also had a kind of a feed-forward control. This scheme can not only lessen gain of conventional PI controller in order to stability but also obtain high tracking performance.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권2호
• /
• pp.186-194
• /
• 1997

In this thesis, a new speed control algorithm based on the load torque observer theory is pro¬posed for the high performance speed control of a voltage source inverter to drive a 3 - phase induction motor. The proposed system becomes robust against disturbances using a feed -- for¬ward control of the load torque estimated at load torque observer. Computer simulation and experimental works using the proposed control confirm that transient response for the varia¬tion ofload torque becomes improved, compared with the conventional PI control method.

• Journal of Power Electronics
• /
• 제12권5호
• /
• pp.787-799
• /
• 2012

Real and reactive power flows on a transmission line interact inherently. This situation degrades power flow controller performance when independent real and reactive power flow regulation is required. In this study, a quasi multi-pulse interline power flow controller (IPFC), consisting of eight six-pulse voltage source converters (VSC) switched at the fundamental frequency is proposed to control real and reactive power flows dynamically on a transmission line in response to a sequence of set-point changes formed by unit-step reference values. It is shown that the proposed hybrid fuzzy-PI commanded IPFC shows better decoupling performance than the parameter optimized PI controllers with analytically calculated feed-forward gains for decoupling. Comparative simulation studies are carried out on a 4-machine 4-bus test power system through a number of case studies. While only the fuzzy inference of the proposed control scheme has been modeled in MATLAB, the power system, converter power circuit, control and calculation blocks have been simulated in PSCAD/EMTDC by interfacing these two packages on-line.