• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.10
• /
• pp.1501-1509
• /
• 2003

The simultaneous addition of xylanase (5,600 EXU/kg) and phytase (500 FTU/kg) feed enzymes to wheat-based broiler diets was investigated. Starter, grower and finisher diets, with three tiers of nutrient specifications, were fed to 1,440 broiler chicks kept on deep litter from 1-42 days post-hatch, without and with xylanase plus phytase, to determine the effects of diet type and enzyme supplementation on growth performance. The nutrient specifications of type A diets were standard; energy density and protein/amino acid levels were reduced on a least-cost basis to formulate type B diets and further reduced to type C diets. Phosphorus (P) and calcium (Ca) levels were adjusted in supplemented diets. From 1-42 days post-hatch, diet type significantly influenced growth performance. Birds on type C diets had lower growth rates (2,429 vs. 2,631 g/bird; p<0.001), higher feed intakes (4,753 vs. 4,534 g/bird; p<0.005) and less efficient feed conversion (1.96 vs. 1.72; p<0.001) than birds offered type A diets. Enzyme supplementation increased growth rates by 3.2% (2,580 vs. 2,501 g/bird; p<0.005) and improved feed efficiency by 2.7% (1.80 vs. 1.85; p<0.05) over the entire feeding period. There were no interactions between diet type and enzyme supplementation. At 21 days, 5 out of 30 birds per pen were transferred to cages to ascertain treatment effect on apparent metabolisable energy (AME) and nitrogen (N) retention. Xylanase plus phytase enhanced AME (13.48 to 13.91 MJ/kg DM; p<0.001) and N retention (56.3 to 59.7%; p<0.005). Carcass and breast weights of the caged birds were determined following commercial processing. Diet type significantly influenced breast weight, carcass weight and yield. Birds offered Type A diets, in comparison to Type C diets, supported heavier breast (467 vs. 424 g; p<0.001) and carcass weights (1,868 vs. 1,699 g; p<0.001) with superior carcass yields (71.8 vs. 70.6%; p<0.005). Enzyme addition increased carcass weight by 3.9% (1,752 vs. 1,821 g; p<0.005) and breast weight by 5.8% (431 vs. 456 g; p<0.01) without influencing yields. Feed ingredient costs per kg live weight gain and per kg carcass weight indicated that enzyme addition was economically feasible, where supplementation of Type A diets generated the most effective results. Importantly, soluble and total non-starch polysaccharide and phytate contents of the wheat used were typical by local standards. This study confirms the potential of supplementing wheat-based broiler diets with xylanase plus phytase but further investigations are required to define the most appropriate inclusion rates and dietary nutrient specifications in this context.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.5
• /
• pp.597-607
• /
• 1998

Processing is generally employed to alter the physical and chemical properties of feeds used in pig diets, using hammer/roller mills, pellet mills and extruders/expanders. The reported optimum particle sizes of corn are approximately $500{\mu}m$, $500-700{\mu}m$, $400-600{\mu}m$, for nursery, growing-finishing, and breeder pigs respectively. Optimum particle size of grains are affected by diet complexity. There was a trend towards reducing particle size in order to increase ADG in pigs fed a simple diet, though such was not the case for pigs fed a complex diet. Uniformity of particle size also affects the nutritional values of swine feeds. Uniform particle sizes would consistently give greater nutrient digestibilities. In terms of pellet quality, it is reported that a higher incidence of fmes in pelleted feeds has a direct correlation with poorer feed conversion ratio in pigs. Particle and pellet sizes are also very important for pelleting in terms of grinding, digestibility, stomach ulceration and pellet durability. A particle size of $600{\mu}m$, or slightly less, seemed optimal for com in fmishing pigs, and the 5/32 in. diameter pellets supported the best efficiencies of gain during nursery and finishing phases. Extruder and/or expander processes would allow the feed industry an increased flexibility to utilize a wider spectrum of feed ingredients, and improve pellet quality of finished feeds. It would appear that extruded or expanded diets containing highly digestible ingredients have little effect on the growth performance of pigs, and the feeding values of the feeds over pelleted diets were not improved as pigs grew. The extruder or expander is much more effective than a pelletizer in salmonella control. Gastric ulcerations and/or keratinizations were consistently reported in pigs fed mash and processed diets containing finely ground grains, whereas carcass quality was not affected by diet processing methods such as pelleting, extruding or expanding. In corn- or sorghum-based diets, the electrical energy consumption is 4-5 times higher in the expanding than in the pelleting process. But the expander's processing cost was half of that shown by an extruder. Finally, the decision of which feed processing technology to adopt would depend on the processing cost, and any potential improvement in growth performance and digestibilities of nutrients should offset the increased operating and capital costs related to the extruder/expander technology over mash or pelleting processes in pigs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.6
• /
• pp.866-871
• /
• 2002

An experiment was conducted at the experimental duck farm of Cantho University to determine the effects of feeding duckweed (Lemna minor) that replaced commercial protein supplements in diets for local and Cherry Valley breeding ducks. The experiment included a total of 180 ducks, with five treatments and three replicates and six breeding ducks (one male plus five females together) per replicate, for both local and exotic Cherry Valley ducks. The five diets were fed ad libitum and were based on rice byproducts supplemented with roasted soya bean meal plus dried fishmeal at levels of 100% (SF100, control), 75 (SF75), 50 (SF50), 25 (SF25) or zero (SF0) % of the protein in the control diet, corresponding to 18, 15, 13, 10 and 8% CP in the diets for both breeds, respectively. Fresh duckweed was supplied ad libitum for all treatments. These diets were fed to local breeding ducks from 7 to 12 months of age, and to exotic breeding ducks (Cherry Valley) from 8 to 13 months of age. Total mean daily dry matter (DM) intakes were 183, 178, 176, 177 and 174 g (p<0.05) for the local ducks, and 221, 208, 215, 219 and 210 g (p<0.01) for the exotic ducks for the SF100 (control), SF75, SF50, SF25 and SF0 diets, respectively. Laying rates of the local ducks were 66.5, 65.2, 62.9, 63.1 and 62.3%, and of the Cherry Valley ducks 61.9, 58.4, 58.9, 59.1 and 53.5% (p<0.001) for the control (SF100), SF75, SF50, SF25 and SF0 treatments, respectively. Fertile egg rates were 95.6, 95.6, 97.8, 97.8 and 92.2%, and hatchabilities 89.4, 80.6, 87.2, 88.6 and 77.8% (p<0.05) for the local breed, and 97.8, 97.8, 91.1, 92.2 and 90.0% (p<0.05) and 72.8, 74.7, 75.0, 74.3 and 76.7% for the Cherry Valley ducks for diets SF100, SF75, SF50, SF25 and SF0, respectively. Corresponding feed conversion ratios (dry matter basis) were 3.83, 3.82, 3.89, 4.01 and 3.96 kg feed per kg egg mass for the local ducks and 4.52, 4.56, 4.58, 4.73 and 5.02 kg feed per kg egg mass for the Cherry Valley ducks for the SF100, SF75, SF50, SF25 and SF0 treatments, respectively. Replacement of 100% of the protein supplement by fresh duckweed in the diets of the local laying ducks decreased the feed costs by 25% compared to the control diet.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.4
• /
• pp.494-500
• /
• 2019

Objective: Feed consumption contributes a large percentage for total production costs in the poultry industry. Detecting genes associated with feeding traits will be of benefit to improve our understanding of the molecular determinants for feed efficiency. The objective of this study was to identify candidate genes associated with feed conversion ratio (FCR) via genomewide association study (GWAS) using sequence data imputed from single nucleotide polymorphism (SNP) panel in a Chinese indigenous chicken population. Methods: A total of 435 Chinese indigenous chickens were phenotyped for FCR and were genotyped using a 600K SNP genotyping array. Twenty-four birds were selected for sequencing, and the 600K SNP panel data were imputed to whole sequence data with the 24 birds as the reference. The GWAS were performed with GEMMA software. Results: After quality control, 8,626,020 SNPs were used for sequence based GWAS, in which ten significant genomic regions were detected to be associated with FCR. Ten candidate genes, ubiquitin specific peptidase 44, leukotriene A4 hydrolase, ETS transcription factor, R-spondin 2, inhibitor of apoptosis protein 3, sosondowah ankyrin repeat domain family member D, calmodulin regulated spectrin associated protein family member 2, zinc finger and BTB domain containing 41, potassium sodium-activated channel subfamily T member 2, and member of RAS oncogene family were annotated. Several of them were within or near the reported FCR quantitative trait loci, and others were newly reported. Conclusion: Results from this study provide valuable prior information on chicken genomic breeding programs, and potentially improve our understanding of the molecular mechanism for feeding traits.

• The Journal of Fisheries Business Administration
• /
• v.43 no.3
• /
• pp.23-30
• /
• 2012

This study aimed to analyze the economic feasibility of Mackerel offshore aquaculture production performance in Jeju region, Korea. Based on the collected biological, costs and market price data, farming revenue and expenses during the farming period were evaluated, and the net present value and the internal rate of return of a 10-year cash inflow and cash outflow were estimated to determine the economic feasibility of Mackerel offshore aquaculture production system. Model results indicated that the Mackerel offshore aquaculture production performance would have high profitability under the current production and market situation. This is because of the relatively high survival rate, relatively low feed conversion ratio and good market prices. However, sensitivity analyses of main important biological and economic variables showed that the economic viability of Mackerel offshore aquaculture production system would be highly vulnerable to production and market condition changes.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.2
• /
• pp.60-65
• /
• 2012

This paper deals with an CAE analysis and optimization of injection molding for a mobile phone cover. Two design goals are established in the optimization; one is to switch over the feed system from cold runner to hot runner for the purpose of reducing material costs, and the other is to minimize the warpage in order to improve product quality. By the full-factorial experiments for design parameters, we showed that the cold runner design could be changed to the hot runner design by replacing the current resin with a new resin of higher fluidity. In addition, we could significantly reduce the warpage of the cover product under the hot runner system by optimizing packing pressure and packing time.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.12
• /
• pp.67-72
• /
• 2019

In manufacturing sites that process and produce parts in large quantities for the automotive and electronics industries, users require the reducing of costs and shortened delivery times. To meet these demands, an increase in the number of processes and an decrease in assembly times need to be addressed. Gantry loaders currently on the market in Korea are mostly used for processing lightweight and simple shapes and are not suitable for conveying and processing complex shapes such as automobile engines and aircraft parts. This makes it difficult to mount the material in place. This study aims to smoothen the transportation of complex shapes through the development of jigs and various approaches in the installation of the feed shaft by researching the gantry loader system for transporting multiple materials with complex shapes.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.343-346
• /
• 2006

Although renewable energy sources are more environmentally friendly than fossil energy sources, it is far more costly, considering current technological standards. It would not present many competitive advantages in the power market. If the renewable electricity is viable in the market, the government should take 'visible' actions to compensate production costs. Popular policies, such as Feed-In-Tariff and Renewable Portfolio Standards, can help to attract investors into generators of renewable electricity. But presently, they are mainly financed through a undifferentiated increase of electricity bills and occasionally confronted with the opposition of the electricity consumers. And most policies tend to focus on increasing the supply of renewable electricity with little consideration toward elevating the motivation of consumers. This study evaluates the potential of environmentally friendly energy consumption and examines the 'green pricing' program which realize the potential.

• Coupled systems mechanics
• /
• v.13 no.3
• /
• pp.219-229
• /
• 2024

By introducing optimization algorithms into the machining process, product quality can be improved, time saved, and costs reduced. The cutting speed and feed can be handled by the turning machine. The approach of optimizing is used to manage pyrotechnics, Lawler's, greedy, bacterial colony, elephant herding, ant lion, spiral, auction, and pattern search for these ten odd ways. Ten artificial optimization methodologies were used to investigate the time and cost of a turning machine. It has been discovered how to create the optimal turning machine procedure. The best solution approach for the turning machine process problem is found, and the results are verified using ANSYS.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1613-1613
• /
• 2001

Fats and molasses are used, at the present time, in a considerable proportion as ingredients for the animal feed industry. They are mainly used as energy sources, but also they provide other characteristics of technological and nutritional interest (dust reduction, increase in palatability, etc). Both semi-liquid ingredients have numerous aspects in common from the point of view of their use in livestock feeds, as well as of their analytical control. Feed manufacturers use several criteria to evaluate the quality of fat and molasses. Furthermore, the traditional methods currently used, for their evaluation (eg. fatty acids, sugars, etc) are expensive and more sophisticated that the traditionally used for solid ingredients. The objective of the present work is to carry out a viability study to evaluate the ability of NIRS technology for the quality control of fat and molasses. Samples of liquid molasses (n = 42) and liquid fat ( n = 61), provided by a feed manufacturer, were scanned in a FOSS-NIR Systems 6500 monochromator equipped with a spinning module. The samples were analysed by folded transmission, using a sample cup of 0.1mm pathlength and gold surface reflector. For molasses, calibration equations were developed for the prediction of moisture (SECV=1.69%; $r^2$=0, 42), gross protein (SECV=0, 14%; $r^2$=0, 99), ashy (SECV=0, 60%; $r^2$=0, 84), NaCl (SECV=0, 05%; $r^2$=0, 99) and sugars (SECV=1, 04%; $r^2$=0, 86). For animal fats calibrations were obtained for the prediction of moisture (SECV=0, 14%, $r^2$=0, 88), acidity index (SECV=0, 83%, $r^2$=0, 82), MIU (SECV=0, 38%, $r^2$=0, 94) and unsaponifiables (SECV=0, 45%, $r^2$=0, 87). High accuracy calibration equations were also obtained for the prediction of the fatty acid profile. The equations have $r^2$values around 0.9 or highest. The results showed that NIRS technology could provide rapid and accurate results and reduce analytical costs associated to the quality control of two Important feed ingredients of a well known chemical variability.