• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.2
• /
• pp.164-169
• /
• 1997

The present experiment was conducted to evaluate the effects of feed processing and feeding methods on growth performance and carcass characteristics of growing-finishing pigs. A total of 72 pigs (LYD, 22.24 kg BW) were employed for a 90-d feeding trial. Treatments were 1) mash dry feeding (MD), 2) mash wet feeding (MW), 3) pellet dry feeding (PD), and 4) extruded pellet dry feeding (EPD). Corn, soybean meal and wheat bran in the basal diets were extruded before mixing and pelleting for EPD diet production. Ileal or fecal digestibility and carcass traits including lean meat percentage and weights of stomach ulcer were also examined. During the growing period, pigs fed PD showed improved (p < 0.05) average daily gain (ADG) and feed conversion (F/G) over those fed MD, whereas no significant differences in average daily feed intake (ADFI) were found among dietary treatments. Finisher pigs fed MD showed lover, but not significant, ADG and F/G than those fed MW, PD or EPD. For the overall period, pigs fed PD grew faster (p < 0.05) than those fed MD or EPD. Feed intake was different between the two feeding methods (MD vs MW), and between the two processed feeds (PD vs EPD). The digestibility of crude fat was higher (p < 0.05) in pigs fed EPD than in pigs fed mash feeds. NFE digestibility of EPD treatment was also higher (p < 0.05) than that of PD. Back fat (10th rib area) was thicker (p < 0.05) tn pigs fed MD than in pigs fed EPD. other carcass traits including incidence of esophagogastric ulcers were not different among treatments. In conclusion, pelleting appeared to bo the desirable processing methods and wet feeding could also be recommended for growing-finishing pigs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.6
• /
• pp.851-856
• /
• 2011

This study was conducted to evaluate the effects of flavor supplementation on pre- and post-weaning performance and behavior of piglets and sows. A total of 30 sows (Landrace${\times}$Yorkshire) and their litters were employed in this study. Sows were randomly assigned to 3 dietary treatments (10 replications per treatment). Dietary treatments included: i) CON, basal diet; ii) TRT1, CON+0.1% vanilla supplement; iii) TRT2, CON+0.1% cheese supplement. The behavior of sows (nursery, eating and standing) and piglets (eating, sleeping and fighting) in each treatment was monitored throughout experiment. Each piglet was weighted at 5, 10, 15 and 21 d after birth to evaluate the average daily gain. Sows and piglets were bled on the weaning d to evaluate the blood characteristics. Back fat and estrus interval were investigated. In this study, there were no differences (p>0.05) in diarrhea score and blood characteristics among treatments. Likewise, the behavior was not influenced (p>0.05) by the dietary flavor supplementation. However, administration of flavor increased (p<0.05) the pre-weaning feed intake, post-weaning average daily gain (ADG) and gain/feed (G/F) ratio. No significant difference was observed (p>0.05) on the blood characteristics, behavior, backfat loss and estrus interval among treatments. In conclusion, administration of flavor could increase creep feed intake pre-weaning and piglet ADG post-weaning, whereas inclusion of flavor had no influence on blood characteristics and performance in sow and piglets.

• Journal of agriculture & life science
• /
• v.45 no.4
• /
• pp.95-103
• /
• 2011

Ninety five Hanwoo steers averaging 226kg of body weight were used to investigate the effect of dietary type on feed efficiency, carcass characteristics and economical analysis in Hanwoo feeding over 22 months. Treatments were composed of commercial formula feed (formula feed), TMR and Fermented-TMR (F-TMR). Intakes of dry matter and TDN were greater in the F-TMR than the other treatments during each growing and fattening phase (p<0.05). Although daily body gain of the F-TMR was lowest during the growing phase, but was 48% greater than those of other treatment during the finishing phase (p<0.05). Feed efficiency of the F-TMR was maintained constantly during whole growing and fattening phases. Carcass weight and rib-eye area of the F-TMR were greatest (p<0.05) among treatments. However, meat yield index and the rate of grade A in meat yield were highest in the formula feed having the thinnest back fat. Marbling score was hugely (p<0.05) increased when steers fed F-TMR, and therateofgrade 1+andoverinmeatqualitywas96%intheF-TMR. Although feed cost in the F-TMR was increased by 40% compare to the formula feed, but net income was increased by 29% due to improvement of meat quality and body gain.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.142-147
• /
• 2023

This paper presents a novel design of a differential patch antenna for 60-GHz millimeter-wave applications. The design process of the back-to-back (BTB) patch antenna is based on the conventional single-patch antenna. The initial design of the BTB patch antenna (Type-I) has a patch size of 0.66 × 0.98 mm² and a substrate size of 0.99 × 1.48 mm². It has a gain of 1.83 dBi and an efficiency of 94.4% with an omni-directional radiation pattern. A 0.4 mm-thick high-resistivity silicon (HRS) is employed for the substrate of the BTB patch antenna. The proposed antenna is further analyzed to investigate the effect of substrate size and resistivity. As the substrate resistivity decreases, the gain and efficiency degrade due to the substrate loss. As the substrate (HRS) size decreases approaching the patch size, the resonant frequency increases with a higher gain and efficiency. The BTB patch antenna has optimal performances when the substrate size matches the patch size on the HRS substrate (Type-II). The antenna is redesigned to have a patch size of 0.81 × 1.18 mm² on the HRS substrate in the same size. It has an efficiency of 94.9% and a gain of 1.97 dBi at the resonant frequency of 60 GHz with an omni-directional radiation pattern. Compared to the initial design of the BTB patch antenna (Type-I), the optimal BTB patch antenna (Type-II) has a slightly higher efficiency and gain with a considerable reduction in antenna area by 34.8%.

• Journal of Welding and Joining
• /
• v.4 no.3
• /
• pp.50-57
• /
• 1986

In this study, the experiments were earried out for the purpose of the clarifying the optimum metal arc spraying conditions, such as spraying distance, wire feed speed, arc current, etc, by using the stainless steel wire ER 308L. Main results obtained are as follows: 1. Optimum spraying distance is closely related to the equilibrium temperature of base material in back surface. 2. The size fused metal particles is increased according to the temperature of fused metal. 3. The maximum adhesion strength of coatings is obtained under the optimum spraying conditions of which the temperature of fundamental is maximum.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.74.3-74
• /
• 2001

This paper proposes a nonlinear adaptive controller based on back-stepping method for tracking reference substrate concentration by manipulating dilution rate in a continuous baker´s yeast cultivating process in stirred tank bioreactor. Control law is obtained from Lyapunov control function to ensure asymptotical stability of the system. The Haldane model for the specific growth rate depending on only substrate concentration is used in this paper. Due to the uncertainty of specific growth rate, it has been modified as a function including the unknown parameter with known bounded values. The substrate concentration in the bioreactor and feed line are measured. The deviation from the reference is observed when the external disturbance such as the change of the feed is introduced to the system ...

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.8
• /
• pp.753-759
• /
• 2009

Feed-forward neural networks have been widely used as function approximation tools in the context of global approximate optimization. In the present study, a wavelet neural network (WNN) which is based on wavelet transform theory is suggested as an alternative to a traditional back-propagation neural network (BPN). The basic theory of wavelet neural network is briefly described, and approximation performance is tested using a nonlinear multimodal function and a composite rotor blade analysis problem. Laplacian of Gaussian function, Mexican function, and Morlet function are considered during the construction of WNN architectures. In addition, approximation results from WNN are compared with those from BPN.

• International Journal of Korean Welding Society
• /
• v.3 no.2
• /
• pp.15-23
• /
• 2003

A genetic algorithm was applied to an arc welding process to determine near optimal settings of welding process parameters which produce good weld quality. This method searches for optimal settings of welding parameters through systematic experiments without a model between input and output variables. It has an advantage of being able to find optimal conditions with a fewer number of experiments than conventional full factorial design. A genetic algorithm was applied to optimization of weld bead geometry. In the optimization problem, the input variables were wire feed rate, welding voltage, and welding speed, root opening and the output variables were bead height, bead width, penetration and back bead width. The number of level for each input variable is 8, 16, 8 and 3, respectively. Therefore, according to the conventional full factorial design, in order to find the optimal welding conditions, 3,072 experiments must be performed. The genetic algorithm, however, found the near optimal welding conditions from less than 48 experiments.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.136.2-136.2
• /
• 2011

A dynamic simulation study on SCR process in GTL process was carried out in order to find optimum operation conditions for pilot plant operation. Optimum operating conditions for SCR synthesis gas process were determined by changing operation variables such as feed temperature and pressure. It was also assumed that physical properties of reaction medium were governed by RKS (Redlich-Kwong-Soave) equation. The effect of temperature and pressure on synthesis gas process $H_2$/CO ratio were mainly examined. Dynamic simulation results were fed back to feed operation condition for optimizing productivity, especially for appropriate condition to FT (Fischer-Tropsch) synthesis unit.

• Journal of the Optical Society of Korea
• /
• v.1 no.1
• /
• pp.1-4
• /
• 1997

The theoretical limit of the noise correlation between the signal and idler outputs of a nondegenerate optical parametric amplifier (NOPA) with a coherent state signal and vacuum state idler input can be enhanced if a non-vacuum coherent state idler input is employed. By choosing a balanced signal and idler input, the noise correlation is $1/{({\root}g + {\root}{g-1})}^2$, where g is the intensity gain of the NOPA, and that is superior to the prediced outputs with single signal input by approximately 3dB. The result is applicable to all the schemes that use the NOPA to produce a sub-shot noise light generation such as feed-back or feed-forward control.