• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.6
• /
• pp.803-810
• /
• 2013

The purpose of this research is to analyze the effect of shape of the inductive textile electrode on the non-contact heart activity sensing, based on the magnetic-induced conductivity principle. Four types of the inductive textile electrodes were determined according to the combinations of the two shape features. A fiber-metal hybrid-typed conductive thread was developed and applied to materialization of the textile electrodes by embroidery method. The heart activity was extracted through the textile electrode sewn on a T-shirt. The experiments were implemented to constantly measure the heart activity for 20 seconds, in each case of 5 healthy male subjects. The heart activity signals acquired in each type of the inductive textile electrode were analyzed, 1)by drawing a comparison of morphology with those of ECG signal (LeadII), and 2)by calculation of the normalized mean and standard deviation of magnitude of the heart activity signals. The analysis resulted that the relatively better quality of signals were acquired in the 'square' types in the matter of whole shape, while the better results were obtained in 'donut' types in the matter of center hole. Accordingly, the relatively best quality of signals was obtained in the case of 'Square-Donut' type of the inductive textile electrode.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.3
• /
• pp.143-150
• /
• 2012

A simulation methodology and corresponding program based on it is to be discussed for analyzing the effects of the networking operation of existing DHC system in connection with CHP system on-site. The practical simulation for arbitrary areas with various building compositions is carried out for the analysis of operational features in both systems, and the various aspects of thermal energy grids with connecting operation are highlighted through the detailed assessment of predicted results. The intrinsic operational features of CHP prime movers, gas engine, gas turbine etc., are effectively implemented by realizing the performance data, i.e. actual operation efficiency in the full and part loads range. For the sake of simplicity, a simple mathematical correlation model is proposed for simulating various aspects of change effectively on the existing DHC system side due to the connecting operation, instead of performing cycle simulations separately. The empirical correlations are developed using the hourly based annual operation data for a branch of the Korean District Heating Corporation (KDHC) and are implicit in relation between main operation parameters such as fuel consumption by use, heat and power production. In the simulation, a variety of system configurations are able to be considered according to any combination of the probable CHP prime-movers, absorption or turbo type cooling chillers of every kind and capacity. From the analysis of the thermal network operation simulations, it is found that the newly proposed methodology of mathematical correlation for modelling of the existing DHC system functions effectively in reflecting the operational variations due to thermal energy grids with connecting operation. The effects of intrinsic features of CHP prime-movers, e.g. the different ratio of heat and power production, various combinations of different types of chillers (i.e. absorption and turbo types) on the overall system operation are discussed in detail with the consideration of operation schemes and corresponding simulation algorithms.

• Journal of Korean Society of Forest Science
• /
• v.43 no.1
• /
• pp.56-63
• /
• 1979

The morphological and anatomical features of petioles in genus Populus were as follows, 1. All of 8 species had one sort of these trichoma; wooly, tomentose, gravellate, cravellate. 2. The colors of petioles were different with the species; Populus alba was green white, P. glandulosa was white green, and P. maximowiezii P. koreana were red on the surface but the back of petioles were light green. Most of petioles of P. euramericana and P. deltoides were light green but the rest on the same trees were two different colors as P. nigra var. italica and P. simonii were light green or yellow green. 3. P. koreana had the largest diameter of petiole among the 8 species investigated, and P. simonii was the smallest. 4. The lengths of petioles were highly significant among species except 3 combinations. 5. The number of vascular was different with the species and with section levels of petiole; At the base level, the vascular number of 8 species were highly significant among species and the average number of vascular of 8 species were 6.61. At the middle level, the average number of vascular were 5.26 in 8 species, and P. nigra var. italica were highly significant against the rest 7 species and two combinations showed at 5 percent significance. 6. At the terminal level, since the 95.5 per cent of the samples contained 3~4 vasculars and only 4.5 per cent of the samples in each section contained 5 vasculars, there, was no significance among the species. 6. Mostly the largest vascular of petioles was appeared in under part of the any sections in 8 species investigated.

• The Korean Journal of Archival Studies
• /
• no.32
• /
• pp.127-176
• /
• 2012

Metadata is well recognized as one of the foundational factors in archiving and long-term preservation of digital resources. There are several metadata standards for records management, archives and preservation, e.g. ISAD(G), EAD, AGRkMs, PREMIS, and OAIS. Consideration is important in selecting appropriate metadata standards in order to design metadata schema that meet the requirements of a particular archival system. Interoperability of metadata with other systems should be considered in schema design. In our previous research, we have presented a feature analysis of metadata standards by identifying the primary resource lifecycle stages where each standard is applied. We have clarified that any single metadata standard cannot cover the whole records lifecycle for archiving and preservation. Through this feature analysis, we analyzed the features of metadata in the whole records lifecycle, and we clarified the relationships between the metadata standards and the stages of the lifecycle. In the previous study, more detailed analysis was left for future study. This paper proposes to analyze the metadata schemas from the viewpoint of tasks performed in the lifecycle. Metadata schemas are primarily defined to describe properties of a resource in accordance with the purposes of description, e.g. finding aids, records management, preservation and so forth. In other words, the metadata standards are resource- and purpose-centric, and the resource lifecycle is not explicitly reflected in the standards. There are no systematic methods for mapping between different metadata standards in accordance with the lifecycle. This paper proposes a method for mapping between metadata standards based on the tasks contained in the resource lifecycle. We first propose a Task Model to clarify tasks applied to resources in each stage of the lifecycle. This model is created as a task-centric model to identify features of metadata standards and to create mappings among elements of those standards. It is important to categorize the elements in order to limit the semantic scope of mapping among elements and decrease the number of combinations of elements for mapping. This paper proposes to use 5W1H (Who, What, Why, When, Where, How) model to categorize the elements. 5W1H categories are generally used for describing events, e.g. news articles. As performing a task on a resource causes an event and metadata elements are used in the event, we consider that the 5W1H categories are adequate to categorize the elements. By using these categories, we determine the features of every element of metadata standards which are AGLS, AGRkMS, PREMIS, EAD, OAIS and an attribute set extracted from DPC decision flow. Then, we perform the element mapping between the standards, and find the relationships between the standards. In this study, we defined a set of terms for each of 5W1H categories, which typically appear in the definition of an element, and used those terms to categorize the elements. For example, if the definition of an element includes the terms such as person and organization that mean a subject which contribute to create, modify a resource the element is categorized into the Who category. A single element can be categorized into one or more 5W1H categories. Thus, we categorized every element of the metadata standards using the 5W1H model, and then, we carried out mapping among the elements in each category. We conclude that the Task Model provides a new viewpoint for metadata schemas and is useful to help us understand the features of metadata standards for records management and archives. The 5W1H model, which is defined based on the Task Model, provides us a core set of categories to semantically classify metadata elements from the viewpoint of an event caused by a task.

• Clinical and Experimental Pediatrics
• /
• v.49 no.11
• /
• pp.1167-1173
• /
• 2006

Purpose : To evaluate various sepsis screening tests, individually and in combination, to formulate a guideline for the diagnosis of neonatal sepsis. Methods : The study was a retrospective cohort study. It took place at the neonatal intensive care unit of the Paediatric Department, Il Sin Christian Hospital, Busan, Korea, over a period of 68 months from 1st, April, 2001 to 31st, December, 2005. This study evaluated 100 neonates having clinical features of sepsis and 100 normal asymptomatic neonates and used screening tests including C-reactive protein (CRP), total leukocyte count (TLC), absolute neutrophil count (ANC), immature neutrophils to total neutrophil count ratio (I/T ratio), thrombocytopenia, degenerative changes in the neutrophils and gastric aspirate cytology (GAC) for the diagnosis of neontal sepsis. Results : The sensitivity of CRP and ANC was high. CRP had 86 percent sensitivity for group-A (proven sepsis) and 74 percent sensitivity for group-B (probable sepsis) and 94 percent specificity for group-A, B. ANC had sensitivity of 72 percent for group-A and 62 percent for group-B and 86 percent specificity for group-A, B. For group-A, sensitivity, specificity of GAC for polymorphs was 74 percent and 94 percent respectively. As for sensitivity, specificity of platelet count for group-A was 64 percent and 89 percent respecively. The sensitivity, specificity and predictive values (PV) of the individual tests and different test combinations were also calculated for group-A and B. Conclusion : For the detection of culture negative cases in neonatal sepsis, screening tests including CRP, TLC, ANC, thrombocytopenia, cytoplasmic vacuolization in the neutrophils and GAC for polymorphs have high sensitivity. A combination of three tests has higher sensitivity.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.6
• /
• pp.209-220
• /
• 2004

The main feature of H.264 standard against conventional video standards is the high coding efficiency and the network friendliness. In spite of these outstanding features, it is not easy to implement H.264 codec as a real-time system due to its high requirement of memory bandwidth and intensive computation. Although the variable block size motion compensation using multiple reference frames is one of the key coding tools to bring about its main performance gain, it demands substantial computational complexity due to SAD (Sum of Absolute Difference) calculation among all possible combinations of coding modes to find the best motion vector. For speedup of motion estimation process, therefore, this paper proposes fast algorithms for both integer-pel and fractional-pel motion search. Since many conventional fast integer-pel motion estimation algorithms are not suitable for H.264 having variable motion block sizes, we propose the motion field adaptive search using the hierarchical block structure based on the diamond search applicable to variable motion block sizes. Besides, we also propose fast fractional-pel motion search using small diamond search centered by predictive motion vector based on statistical characteristic of motion vector.

• The Journal of the Korea Contents Association
• /
• v.12 no.1
• /
• pp.91-102
• /
• 2012

Generally today's culture and the arts industry has been focusing more on economic value than the arts. Therefore this paper will elucidate the meaning of the culture and the arts can be a break though which can only include commercial and economic values but transcend its values ultimately. First of all, this paper will suggest an advanced 3D stereoscopic images by analysis of examples and environments of realistic media arts. Looking into the changes of related technologies and market environments, the motion-recognition technology, as seem in SF film "Minority report", has become a feasible technology. In the past, 3D stereoscopic images were shown in the theme park theatre and exhibition halls for group viewing. but recent 3D TV and display devices have changed those environments to personal. Since domestic researches of realistic media art has been little, this paper will analyze them respecting to three broad classifications. The results are : Firstly, in CAVE method, more impact capabilities of spectators are expected that they can manipulate interactive interfaces freely and the physical movements of spectators can operate interactively. Secondly, inter-network communications and expansion of viewers' perceptions are predicted by way of HMD method, sensor suites and communication equipments. Thirdly, combinations of HMD and motion tracking utilization is foreseen. With the convergent usages of these three features, we can prospect the possibilities of interactive 4D that spectators wearing 3D stereoscopic display devices can experience and make their own 3D stereoscopic images actively at the point of their views.

• Progress in Medical Physics
• /
• v.18 no.2
• /
• pp.93-97
• /
• 2007

This study was designed to evaluate radiosurgery technique using multiple noncoplanar arc therapy with intensity modulated fine MLC shaped photon beam. The stereotactic radiosurgery was performed with 6-MV X-ray beams from a Clinac 21EX LINAC (Varian, Palo Alto, CA, USA) with a MLC-120, which features a full $40{\times}40cm$ field and is the first MLC for general use that offers 0.5 cm resolution for high precision treatment of small and irregular fields. We used a single isocenter and five gantry-couch combinations with a set of intensity modulated arc therapy. We investigated dosimetric characteristics of 2 cm sized spherical target volume with film (X-OMAT V2 film, Kodak Inc, Rochester NY, USA) dosimetry within $25{\times}25cm$ acrylic phantom. A simulated single isocentric treatment using inversely Planned 3D radiotherapy planning system demonstrated the ability to conform the dose distribution to an spherical target volume. The 80% dose level was adequate to encompass the target volume in frontal, sagittal, and transverse planes, and the region between the 40% and 80% isodose lines was $4.0{\sim}4.5mm$ and comparable to the dose distribution of the Boston Arcs. We expect that our radiosurgery technique could be a treatment option for irregular-shaped large intracranial target.

• Journal of Korean Society for Geospatial Information Science
• /
• v.3 no.2 s.6
• /
• pp.101-113
• /
• 1995

In pipeline planning, the systematic and reasonal management of topographical and spatial data are needed in order to omprove the availibilities for data analysis and the effective combinations of spatial informations. According to that fact, DBMS (Database Management System) and DSS(Decision making Support System) have to be developed for the planning of water supply system Also, the economic selection for harmonious delivery of water to target area, since the alternatives of pre-designed pipeline are influenced by hydraulic stability and geographic characteristics. In this study, GIS technique for water supply planning and management which stores graphic features and attributes as digital data sets is considered and engineering application programs are integrated for effective planning of water supply system. Decision making support system based on analyzing technical, Social and economical aspects is developed for the extension of water supply facilities and pipeline configurations. Especially, Hydraulic, land-use and economic influences are considered as important factors for the purpose of developing the system. Hydraulic analysis program(SAPID) for pipeline flow which is already developed in Water Resources Research Institute and economic analysis program(ECOVEL) are integrated with GIS for resonable decision making. Every possible aspects in pipeline planning for water supply is reviewed and the applicabilities of developed system into the field are evaluated.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.6
• /
• pp.517-528
• /
• 2013

Objective: The objective of this study was to suggest a multi-modal controller type for Smart TV Control. Background: Recently, many issues regarding the Smart TV are arising due to the rising complexity of features in a Smart TV. One of the specific issues involves what type of controller must be utilized in order to perform regulated tasks. This study examines the ongoing trend of the controller. Method: The selected participants had experiences with the Smart TV and were 20 to 30 years of age. A pre-survey determined the first independent variable of five tasks(Live TV, Record, Share, Web, App Store). The second independent variable was the type of controllers(Conventional, Mouse, Voice-Based Remote Controllers). The dependent variables were preference, task completion time, and error rate. The experiment consist a series of three experiments. The first experiment utilized a uni-modal Controller for tasks; the second experiment utilized a dual-modal Controller, while the third experiment utilized a triple-modal Controller. Results: The first experiment revealed that the uni-modal Controller (Conventional, Voice Controller) showed the best results for the Live TV task. The second experiment revealed that the dual-modal Controller(Conventional-Voice, Conventional-Mouse combinations) showed the best results for the Share, Web, App Store tasks. The third experiment revealed that the triple-modal Controller among all the level had not effective compared with dual-modal Controller. Conclusion: In order to control simple tasks in a smart TV, our results showed that a uni-modal Controller was more effective than a dual-modal controller. However, the control of complex tasks was better suited to the dual-modal Controller. User preference for a controller differs according the Smart TV functions. For instance, there was a high user preference for the uni-Controller for simple functions while high user preference appeared for Dual-Controllers when the task was complex. Additionally, in accordance with task characteristics, there was a high user preference for the Voice Controller for channel and volume adjustment. Furthermore, there was a high user preference for the Conventional Controller for menu selection. In situations where the user had to input text, the Voice Controller had the highest preference among users while the Mouse Type, Voice Controller had the highest user preference for performing a search or selecting items on the menu. Application: The results of this study may be utilized in the design of a controller which can effectively carry out the various tasks of the Smart TV.