• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.7
• /
• pp.827-835
• /
• 2016

Ride comfort of a vehicle is often determined by rubber bushes in suspension system. If transmission forces versus deformations across the bushes are available under operational conditions, improvement of the ride comfort could be done with more ease. Recently, the transmission forces are measured using custom-made force transducers inside the links. This study presents a feasibility study on estimation of the rubber bush deformations using vibration signals on the rigid links. Linear variable displacement transducers as well as piezoelectric accelerometers are used to expand frequency range to very low frequency, which cannot be done with accelerometers only. How to estimate the bush deformation from the two vibration signals on the links are presented together with experimental results.

• STI Policy Review
• /
• v.2 no.3
• /
• pp.35-44
• /
• 2011

Korea has rapidly increased R&D investment over the last few decades and the intensity of R&D investment is among the highest in the world; however, there are serious concerns about R&D performance and R&D efficiency. This study is to improve the economic assessment methodology regarding a feasibility study for national R&D programs that are thought to be one of the most prominent ways to enhance R&D efficiency. In order to improve the methodology of economic assessment, a few of important factors such as technical or market uncertainty, spillover effect, and R&D contribution ratio should be covered in the model. The focus of this article is technological and market uncertainty that has a close relation with strategic flexibility and utilization potential to increase the value of R&D programs. To improve the current linear and definitive R&D process, a new framework with strategic flexibility is suggested, in which the result of economic assessment that considers technological and market uncertainty is reflected in planning. That kind of feedback process is expected to enhance the value of the program/project as well as R&D efficiency.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1574-1586
• /
• 2008

Railway is the most effective transportation than any other traffic. But due to the its expensive maintenance fee and various components like roadbed, rail, rollingstock, electric and signal etc, the construction cost of the railway is usually higher than highway. Such a reason, a lot of cost and period are needed to complete the railway project. In addition that considering the decreasing of the SOC budget, the investment in the railway industry is getting hard than ever. This study analyzed the cost, term of work, freight & passenger transportation demand of the wide area railway electrification project and main line improvement project. And it compared the estimation value and real value of the projects like cost and period etc. And this study surveyed the economic feasibility including factors which are not considered in the feasibility study guide. With those results, This study suggest the project management and evaluation method to enlarge the efficiency of the railway construction project.

• Korean Management Science Review
• /
• v.30 no.2
• /
• pp.1-10
• /
• 2013

Case studies are made to investigate the relationship between the accuracy of energy production estimation and project feasibility indicators such as rate of return on equity (ROE) and debt service coverage ratio (DSCR) for three wind farm projects. It is found out that 1% improvement in the accuracy of energy production estimation may enhance the ROE by more than 0.5% in the case of P95, thanks to improved financing terms. AHP survey shows that MCP correlation of measured in situ wind data with long term wind speed distribution and hands-on experiences of flow analysis are more important than other factors for more precise annual energy production estimation.

• Journal of Korea Technology Innovation Society
• /
• v.8 no.3
• /
• pp.1175-1198
• /
• 2005

The objective of the study is to verify the relationship between technology valuation indexes and corporate's performance in ventures by business operating periods. The result of the study is expected to be useful in loan evaluation, investment decision, internal management decision making and business improvement. The results of study is as follows. First, in early stage ventures, we find that three major valuation index(technology feasibility, economic efficiency, productivity) are significant ex-ante variables which are discriminating between firms' going concern and firms' failure. Second, in growth stage ventures, we find that three major valuation index(business feasibility, general marketability, technology marketability) are significant ex-ante variables which are discriminating between firms' going concern and firms' failure. Third, in early stage ventures, we find that at least thirty-eight minor valuation index elements are significant ex-ante variables which are discriminating between firms' going concern and firms' failure and in growth stage ventures, thirty-one minor valuation index elements are significant in various analysis' results.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2017.11a
• /
• pp.535-546
• /
• 2017

국가 R&D 사업에 대한 예비타당성조사 시 R&D 중복성에 대한 검토는 중복된 투자를 방지하여 재정 투자의 효율성을 높이는데 중요하다. 본 연구에서는 예비타당성조사 담당자들을 대상으로 중복성 검토에 대한 중요요인, 개선사항, 판단기준, 판단주체에 대한 설문조사 분석을 진행하였고, 외부 전문가 그룹의 인식차이와 비교하였다. 설문조사 결과에 대한 통계 분석을 통해 중복성 검토에서 가장 중요한 요인은 '중복성 판단기준, 시스템의 데이터베이스 및 검색 알고리즘'으로 확인되었고, 3가지 요인에 대한 개선이 중복성 검토를 개선하는데 가장 중요함을 확인하였다. 또한 다중회귀분석을 통해 주요 요인들이 중복성 검토결과의 정확성에 미치는 영향성을 분석하여 요인들의 유의성에 대해 확인하였다. 본 연구를 통해 예비타당성 조사 시 R&D 중복성에 대한 검토가 향후 어떤 방향으로 개선되어야하는지에 대해 시사점이 제시된다.

• Journal of Information Science Theory and Practice
• /
• v.1 no.1
• /
• pp.10-26
• /
• 2013

Domain transfer is a widely recognized problem for machine learning algorithms because models built upon one data domain generally do not perform well in another data domain. This is especially a challenge for tasks such as opinion classification, which often has to deal with insufficient quantities of labeled data. This study investigates the feasibility of self-training in dealing with the domain transfer problem in opinion classification via leveraging labeled data in non-target data domain(s) and unlabeled data in the target-domain. Specifically, self-training is evaluated for effectiveness in sparse data situations and feasibility for domain adaptation in opinion classification. Three types of Web content are tested: edited news articles, semi-structured movie reviews, and the informal and unstructured content of the blogosphere. Findings of this study suggest that, when there are limited labeled data, self-training is a promising approach for opinion classification, although the contributions vary across data domains. Significant improvement was demonstrated for the most challenging data domain-the blogosphere-when a domain transfer-based self-training strategy was implemented.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.1193-1198
• /
• 2005

The pre-assembly takes a large portion of the fabrication cost of steel bridges. In order to save the fabrication cost through the improvement of the conventional pre-assembling process, this research investigates a numerical pre-assembly simulation as an alternative to current pre-assembling process. The 3D laser scanning was utilized in site and measuring data for steel box were analyzed. The productivity of pre-assembly simulation system is compared with the conventional pre-assembling system. This paper identifies feasibility on the alternative pre-assembling process and then proposes the scheme of the pre-assembly simulation system development satisfying the current pre-assembly inspection of standards.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.44-54
• /
• 2011

Intelligent transport services on smart roads tend to have a problem at the stage of benefit-cost analysis that can not secure economic feasibility of the new services which increase early investment cost on building its infrastructure. It is expected that the number of road accidents, 'Incident/Accident', will decline through various safety services using intelligent safety facilities, intelligent transport management and so on, and that traffic congestion will also decrease. The effect of traffic congestion reduction could be the benefit by safety improvement, however current investment-analysis process in Korea does not appropriate it as a benefit. This study estimated road blocking time with 'Incident/Accident' classification and highway accident data of past three years. It also developed a generalized model by a regression analysis with a microscopical simulation. Furthermore, it suggested necessary units on quantitative analysis in order to make the developed model applicable to investment evaluation. As a result of applying the developed model to Smart-Highway Project, it showed that total safety improvement benefit is about 139 billion dollars over 30 years when it is supposed that accident decreasing rate by smart safety facilities is 10%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.12
• /
• pp.967-975
• /
• 2013

In the design of underwater electro acoustic transducer, power factor improvement circuit is more required rather than impedance matching if the driving power amplifier has little inner resistance. Many research results have been focused on the power matching circuit designing for transferring maximum power in the wideband. There are few results in the designing study on the power factor improvement for the wide band underwater electro acoustic transducer. In this paper, we set up a new design method on the power factor improvement for the wide band electro acoustic transducer, and confirm its feasibility by the experiments.