• 제목/요약/키워드: FeCo nanoparticles

검색결과 113건 처리시간 0.025초

Morphology-dependent Nanocatalysis: Rod-shaped Oxides

  • Shen, Wenjie
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.130-131
    • /
    • 2013
  • Nanostructured oxides are widely used in heterogeneous catalysis where their catalytic properties are closely associated with the size and morphology at nanometer level. The effect of particle size has been well decumented in the past two decades, but the shape of the nanoparticles has rarely been concerned. Here we illustrate that the redox and acidic-basic properties of oxides are largely dependent on their shapes by taking $Co_3O_4$, $Fe_2O_3$, $CeO_2$ and $La_2O_3$ nanorods as typical examples. The catalytic activities of these rod-shaped oxides are mainly governed by the nature of the exposed crystal planes. For instance, the predominant presence of {110} planes which are rich in active $Co^{3+}$ on $Co_3O_4$ nanorods led to a much higher activity for CO oxidation than the nanoparticles that mainly exposed the {111} planes. The simultaneous exposure of iron and oxygen ions on the surface of $Fe_2O_3$ nanorods have significantly enhanced the adsorption and activation of NO and thereby promoted the efficiency of DeNOx process. Moreover, the exposed surface planes of these rod-shaped oxides mediated the reaction performance of the integrated metal-oxide catalysts. Au/$CeO_2$ catalysts exhibited outstanding stability under water-gas shift conditions owing to the strong bonding of gold particle on the $CeO_2$ nanorods where the formed gold-ceria interface was resistant towards sintering. Cu nanoparticles dispersed on $La_2O_3$ nanorods efficiently catalyzed transfer dehydrogenation of primary aliphatic alcohols based on the uniue role of the exposed {110} planes on the support. Morphology control at nanometer level allows preferential exposure of the catalytically active sites, providing a new stragegy for the design of highly efficient nanostructured catalysts.

  • PDF

스핀밸브 바이오 센서를 이용한 혈액과 나노입자의 자성특성 검출 (The Detection of Magnetic Properties in Blood and Nanoparticles using Spin Valve Biosensor)

  • 박상현;소광섭;안명천;황도근;이상석
    • 한국자기학회지
    • /
    • 제16권3호
    • /
    • pp.157-162
    • /
    • 2006
  • 이온빔 증착 스퍼터링법과 고아 리소그래피법으로 FeMn-스핀밸브 바이오 센서를 제작하였다. 혈액내의 Fe를 포함한 헤모글로빈(Hemoglobin)과 나노 자성입자의 자성검출은 최대 자장감응 약 $0.1{\sim}0.8%/Oe$인 거대자기저항 스핀밸브 바이오 센싱소자를 이용하였다. 사용된 혈액은 인체의 피였고, Co-페라이트 나노 자성입자는 수용성 무정형 실리카로 코팅이 되었으며, 그 크기의 평균직경의 범위는 9nm에서 50nm이었다. 실제 크기가 $5x10{\mu}m^2 $ 혹은 $2x6{\mu}m^2 $로 제작된 센싱소자의 4 전극 중 전류 입력단자에 흐르는 감지전류는 1 mA로 하였다. 혈액과 나노자성 입자가 소자의 중앙부분으로 떨어졌을 때, 출력신호는 각각 자성 여부의 검출 특성을 알 수 있는 충분한 크기로 나타났다.

고압 균질기의 압력이 마그네타이트 나노입자의 자기 특성에 미치는 영향 (Effect of Pressure on the Magnetic Properties of Magnetite Nanoparticles Synthesized Using a High Pressure Homogenizer)

  • 지성화;김현효;김효진
    • 한국자기학회지
    • /
    • 제26권6호
    • /
    • pp.190-195
    • /
    • 2016
  • 본 연구에서는 분산제 및 산화제를 전혀 첨가하지 않은 채 고압 균질기를 사용하여 $Fe(OH)_2$ 현탁액으로부터 합성된 마그네타이트 나노입자의 자기 특성에 미치는 공정 압력의 영향을 체계적으로 조사하였다. 관측된 X-선 회절 패턴으로부터 모든 나노입자가 마그네타이트의 역스피넬 구조를 가진다는 것을 알 수 있었다. X-선 회절 및 투과전자현미경 분석 결과로부터 마그네타이트 나노입자의 평균 입자 크기는 고압 균질화 과정의 공정 압력에 의해 조절될 수 있는 것으로 드러났다. 평균 입자 크기는 21에서 26 nm에 이르며, 공정 압력이 증가함에 따라 감소하는 것으로 밝혀졌다. 시료진동형 자화율 측정기를 사용하여 상온에서 측정된 자기 이력 곡선으로부터 1500 bar의 공정 압력 조건에서 합성된 마그네타이트 나노분말이 초상자성 거동을 나타내는 것을확인할 수 있었다.

철환원 박테리아에 의한 금속 환원 및 광물형성 (Metal Reduction and Mineral formation by fe(III)-Reducing Bacteria Isolated from Extreme Environments)

  • Yul Roh;Hi-Soo Moon;Yungoo Song
    • 한국광물학회지
    • /
    • 제15권3호
    • /
    • pp.231-240
    • /
    • 2002
  • 미생물에 의한 금속이온의 환원은 탄소와 금속의 생지화학적 순환에 영향을 줄 뿐만 아니라 또한 금속, 방사성원소, 그리고 유기물로 오염된 지하수와 토양의 정화에 있어서 중요한 역할 가능성을 시사하고 있다. 지구의 극한 환경(예: 심해저 퇴적, 알칼리성 호수 등)에서 서식하는 철환원 박테리아를 분리하여 금속이온의 환원과 광물 형성 등의 실험에 이용하여 본 결과에 의하면, 이들 철환원 박테리아는 Fe(III), Mn(IV), Cr(VI), Co(III), and U(VI)이온 등을 환원시킬 뿐만 아니라, 자철석($Fe_3$$O_4$), 능철석($FeCO_3$), 방해석($CaCO_3$), 능망간석($MnCO_3$), 비비아나이트 [$Fe_3$($PO_4$)$_2$ .$8H_2$O], 우라니나이트(UO) 등의 광물을 형성한다. 철 환원 박테리아에 의한 광물 형성과 금속이온의 환원에 영향을 미치는 주요소는 대기의 조성, 화학 조성, 및 박테리아의 종이다. 호열성 철환원 박테리아는 철수화물과 금속이온(Co, Cr, Ni) 등을 동시에 환원시켜 금속 치환된 자철석을 합성하며, 또한 석탄회 등을 이용하여 탄산염 광물을 형성하여 대기 중의 이산화탄소를 고정하는 역할을 하기도 한다. 따라서 미생물에 의한 금속이온이 환원은 자연계에서 철과 탄소의 지화학적인 순환에 영향 미치며, 또한 미생물에 의한 자철석의 합성은 산업적으로 많은 이용가치가 있을 것으로 본다.

Sol-Gel 방법을 이용하여 제작된 Pt이 첨가된 Fe2O3 나노 입자의 가스 감지 특성 (Gas Sensing Properties of Pt Doped Fe2O3 Nanoparticles Fabricated by Sol-Gel Method)

  • 장민형;임유성;최승일;박지인;황남경;이문석
    • 한국전기전자재료학회논문지
    • /
    • 제30권5호
    • /
    • pp.288-293
    • /
    • 2017
  • $Fe_2O_3$ is one of the most important metal oxides for gas sensing applications because of its low cost and high stability. It is well-known that the shape, size, and phase of $Fe_2O_3$ have a significant influence on its sensing properties. Many reports are available in the literature on the use of $Fe_2O_3$-based sensors for detecting gases, such as $NO_2$, $NH_3$, $H_2S$, $H_2$, and CO. In this paper, we investigated the gas-sensing performance of a Pt-doped ${\varepsilon}$-phase $Fe_2O_3$ gas sensor. Pt-doped $Fe_2O_3$ nanoparticles were synthesized by a Sol-Gel method. Platinum, known as a catalytic material, was used for improving gas-sensing performance in this research. The gas-response measurement at $300^{\circ}C$ showed that $Fe_2O_3$ gas sensors doped with 3%Pt are selective for $NO_2$ gas and exhibita maximum response of 21.23%. The gas-sensing properties proved that $Fe_2O_3$ could be used as a gas sensor for nitrogen dioxide.

뫼스바우어 분광법에 의한 Fe-나노입자의 탄화물 코팅에 관한 연구 (Studying Carbon Coating on the Surface of Nano-sized Fe Particle by Mössbauer Analysis)

  • 오세진;최철진;김진천;권순주;진상호
    • 한국자기학회지
    • /
    • 제15권3호
    • /
    • pp.172-176
    • /
    • 2005
  • 화학기상응축법(CVC)에 의한 제조된 네 개의 나노-Fe 입자 시료들이 뫼스바우어, XRD, BET와 TEM에 의하여 조사되었다. 네 개의 시료들은 고순도 이송가스와 분해온도에 의해 구성이 되었다. 각 시료를 구성하고 있는 입자들은 2 또는 3층구조로 형성되었음을 TEM분석으로 알 수 있었다. 평균입도의 경우에는 분해온도에 정비례하는 특성을 보여 주었다. 분해온도가 $500^{\circ}C$일 경우에, 이송가스를 CO로 사용하게 되면 $Fe_3C$의 형성이 $CH_4$보다 용이한 것으로 나타났다. 그러나 $1,100^{\circ}C$의 경우에는, CO와 $CH_4$모두에서 $Fe_3C$의 형성이 대부분을 차지하고 있는 것으로 나타났다.

Gas sensing properties of polyacrylonitrile/metal oxide nanofibrous mat prepared by electrospinning

  • 이득용;조정은;김예나;오영제
    • 센서학회지
    • /
    • 제17권4호
    • /
    • pp.281-288
    • /
    • 2008
  • Polyacrylonitrile(PAN)/metal oxide(MO) nanocomposite mats with a thickness of 0.12 mm were electrospun by adding 0 to 10 wt% of MO nanoparticles ($Fe_2O_3$, ZnO, $SnO_2$, $Sb_2O_3-SnO_2$) into PAN. Pt electrode was patterned on $Al_2O_3$ substrate by DC sputtering and then the PAN(/MO) mats on the Pt patterned $Al_2O_3$ were electrically wired to investigate the $CO_2$ gas sensing properties. As the MO content rose, the fiber diameter decreased due to the presence of lumps caused by the presence of MOs in the fiber. The PAN/2% ZnO mat revealed a faster response time of 93 s and a relatively short recovery of 54 s with a ${\Delta}R$ of 0.031 M${\Omega}$ at a $CO_2$ concentration of 200 ppm. The difference in sensitivity was not observed significantly for the PAN/MO fiber mats in the $CO_2$ concentration range of 100 to 500 ppm. It can be concluded that an appropriate amount of MO nanoparticles in the PAN backbone leads to improvement of the $CO_2$ gas sensing properties.