[ $Co_{1-x}Fe_xSb_3$ ] skutterudites were synthesized by encapsulated induction melting and their thermoelectric properties were investigated. Single phase ${\delta}-CoSb_3$ was successfully obtained by the subsequent heat treatment at 773 K for 24 hours in vacuum. However, ${\delta}-CoSb_3$ was decomposed to FeSb2 and Sb when $x{\leq}0.3$, which means that the solubility limit of Fe to Co is x<0.3. The positive signs of Seebeck coefficients for all Fe-doped specimens revealed that Fe atoms acted as p-type dopants by substituting Co atoms. Thermoelectric properties were remarkably enhanced by Fe doping and optimum composition was found to be $Co_{0.7}Fe_{0.3}Sb_3$ in this study.
FAT복합체는 TOS ($TiOSO_4{\cdot}xH_2O$)를 사용하여 솔-겔 방법으로 제조한다. 시료들은 SEM, 비표면적, XRD 및 EDX를 사용하여 분석하였다. SEM결과로서 Fe 와 $TiO_2$ 입자가 AC 표면에 분포하고 있다. XRD 결과에서 Fe-AC/$TiO_2$ 복합체는 다 anatase결정상을 하고 있다. 그리고 EDX 결과에서 C, O, Ti 및 Fe 원소가 Fe-AC/$TiO_2$ 복합체에 다 존재하고 있다. 복합체의 광촉매 활성은 가시광선과 UV광선을 사용하고 메틸렌불루(MB)의 분해 효과에 의해 측정한다. Fe-AC/$TiO_2$ 복합체는 강한 가시광선 조사에서 우수한 광촉매 효과가 나타난다. AC/$TiO_2$ 복합체에 있는 소량 존재하는 Fe 원소가 그들의 광촉매 활성을 강화할 수 있다.
Thiobacillus ferrooxid,$\alpha$ns와 pyrite 광석을 연마하여 resin에 고정한 시편을 대상으로 침출 시간에 따른 표면의 특성 변화를 EPMA 및 SEM-EDS를 이용하여 이미지와 원소구성비율에 따라 살펴보았다. 침출이 진행됨에 따라 표면의 철성분은 전체적으로 증가한 반면 원소황은 감소하는 경향을 나타냈다. 고배율에 익한 SEM 이미지에서 침출이 진행됨에 따라 도덧모양의 생성물이 침출 13일 경과 시점에 서 나타나 23일 경과 후까지 자라났으나 30일 경과 시점 에서는 표면전체에 새로운 층 생성된 결과로 나타났다. SEM 이미지 상에서 spot과 배경 지접의 원소 구성비를 EDS에 의하여 분석한 후 비교한 결과 초기에는 원소 구성비의 차이가 큰 값을 보이나 침출이 증가함에 따라 좌이가 나 지 않으며 이는 칩풀이 진행됨에 따라 pyrite 표면변이 접차 생성불이 칩착 되는 것으로 볼 수 있었다.
다양한 산업분야에서의 급격한 Packing Density 증가 추세로 인하여 영상분석기기 분야도 기술적으로 매우 진보되어왔다. 특히 전자현미경(SEM : Scanning Electron Microscope)은 반도체, 디스플레이 및 부품 소재의 고집적화와 더불어 기술의 발전 속도가 빠르게 이루어지고 있으며, 매우 고도화 되고 있다. 이에 따른 다양한 응용분야에서 전자현미경의 수요도 꾸준히 증가되고 있는 추세이다. 그러나 기초 과학기술을 기반으로 하는 전자현미경 산업분야는 높아진 국내 수요대비 자체 기술 발전이 미약한 실정이다. 이러한 현실속에서 국내 기술력으로 FE-SEM을 개발하였고 상용화를 눈앞에 두고 있다. 국산화된 FE-SEM은 Outer Lens방식으로 Schottky cathode와 60o conical Lens를 적용하여 고분해능을 구현함과 동시에 Scan generator, Auto-stepping및 Retarding 기능들도 추가 장착하여 제품경쟁력을 극대화 하고자 하였다. 본 발표는 개발된 FE-SEM의 기술적 특징과 개발 과정 및 결과를 소개하고자 하였다. 또한 해외 경쟁사들의 선행 기술동향 대비 현재 국내 기술 수준을 비교하여 향후 나아갈 방향을 고찰하고자 하였으며, 이를 기반으로 진행 중에 있는 초 저-가속전압 및 Semi In-Lens Optic구현을 위한 국내 기술개발 추진 현황도 간략하게 논하고자 한다. 이러한 고찰을 통하여 해외 선진 경쟁사 대비 후 발업체로써 낙후되어있는 국내기술의 격차를 빠르게 좁혀 나아가고 Global 경쟁력을 갖춘 제품을 구현하기 위하여 국내 전문가들과의 협력을 통한 선행 요소기술 및 차별화된 제품기술 확보 방법을 강구하고자 한다.
본 연구는 SAPO-34 결정골격에 도입된 Fe(III)의 메탄올 전환성능에 미치는 영향에 중점을 두었다. 신속결정화법에 의해 높은 결정화도, 좁은 입자 분포도를 갖는 결정(FeAPSO-34; Si/Fe=40,20,5)들이 얻어졌으며, SRD와 SEM의 결과로부터, 골격에 도입된 Fe양이 증가할수록 결정화도는 감소하고, 그 입자크기도 아울러 감소함이 관찰되었다. 한편, 이들의 산성도는 골격에 도입된 Fe양이 증가할수록 감소하였고, 그 결과 메탄올 전환에 있어서 에틸렌의 선택성이 향상되는 결과를 가져왔다.
철 화합물을 처리한 활성탄소섬유(Fe-ACF)를 사용하여 Fe-활성탄소섬유/$TiO_2$ (Fe-ACF/$TiO_2$) 복합체 촉매를 제조하였다. 또한, Fe-ACF/$TiO_2$ 복합체 촉매는 BET, SEM, XRD 와 EDX 기기를 사용하여 특성화하였다. BET 표면적은 각각의 복합체들에 대한 흡착 특성과 관계 있음을 나타내었다. SEM 결과는 ACF의 표면상에 Fe 화합물과 이산화 티탄이 분포해 있음을 나타내었다. XRD 결과는 Fe-ACF/$TiO_2$ 복합체가 철 중간체 화합물과 함께 아나타제 구조를 가지고 있음을 나타내었다. EDX 결과는 Fe-ACF/$TiO_2$ 복합체내에 C, O, Ti와 Fe 피크의 존재를 보였다. 광촉매 분해 효과로부터, 이들 복합체에 의한 유기염료의 분해를 관찰 하였다. 다른 분해 효과는 Fe의 포토-펜톤 반응의 탓으로 여겨진다. 즉 Fe-ACF/$TiO_2$의 복합적인 반응은 MB 분해에 대한 강력한 포토-펜톤 반응을 생성한 것으로 여겨진다.
In this study, the composition and morphology of deposited dust particles with size ranging from a few to tens ㎛ were investigated using SEM/EDX (scanning electron microscopy with energy dispersive x-ray spectrometer). Then deposited dust particles were classified into 8 groups: quartz, aluminosilicates, ca-rich, Fe/Ti oxide, carbon-rich, industrial particle, Fe-rich, and biogenic particle. The sources of deposited dust were high in the order of aluminosilicates 41% > biogenic 18% > Fe-rich 11% > quartz and C-rich 8% > industrial 7% > Fe/Ti oxide 5% > Ca-rich 1%. In particular, the ratio of biogenic particles was relatively high due to influence of pollen. The ratio of carbon-rich was 11% at YM site, 10% at MD site, and 4% at MO site, and the site close to the large emission source was high.
Coal-fired power plants emit various Particulate Matter(PM) at coal storage pile and ash landfill as well as the stack, and affect the surrounding environment. Field Emission Scanning Electron Microscopy and Energy Dispersive X-ray analyzer(FE-SEM/EDX) were used to develop identification factor and the physico-chemical analysis of PM emitted from a power plant. In this study, three samples of pulverized coal, bottom ash, and fly ash were analyzed. The pulverized coal was spherical particles in shape and the chemical composition of C-O-Si-Al and C/Si and C/Al ratios were 200~300 on average. The bottom ash was spherical or non-spherical particles in shape, chemical composition was O-C-Si-Al-Fe-Ca and C/Si and C/Al ratios were $4.3{\pm}4.6$ and $8.8{\pm}10.0$. The fly ash was spherical particles in shape, chemical composition was O-Si-Ai-C-Fe-Ca and C/Si and C/Al ratios were $0.5{\pm}0.2$ and $0.8{\pm}0.5$.
한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
/
pp.957-958
/
2006
Fe doped skutterudite $CoSb_3$ with a nominal composition of $Fe_xCo_{1-x}Sb_{12}(0{\leq}x{\leq}2.5)$ have been synthesized by mechanical alloying (MA) of elemental powders, followed by vacuum hot pressing. Phase transformations during mechanical alloying and vacuum hot pressing were systematically investigated using XRD. Single phase skutterudite was successfully produced by vacuum hot pressing using as-milled powders without subsequent annealing. However, second phase of $FeSb_2$ was found to exist in case of $x\geq2$, suggesting the solubility limit of Fe with Co in this system. Thermoelectric properties as functions of temperature and Fe contents were evaluated for the hot pressed specimens. Fe doping up to x=1.5 with Co in $Fe_xCo_{4-x}Sb_{12}$ appeared to increase thermoelectric figure of merit (ZT) and the maximum ZT was found to be 0.78 at 525K in this study.
$CuFe_2O_4$와 $Fe_3O_4$의 탄소 침적 및 환원 특성을 $900^{\circ}C$에서 TGA, XRD, SEM, TEM 등의 분석 및 반응 후 가스조성분석을 통하여 연구하였다. XRD 분석결과 환원된 $Fe_3O_4$는 Fe(iron)와 graphite(C) 그리고 $Fe_3C$으로 구성되어 있는 것으로 나타났다. 반면에, 환원된 $CuFe_2O_4$에서는 graphite나 $Fe_3C$가 나타나지 않았다. SEM을 이용하여 표면 구조를 관찰한 결과 환원된 $Fe_3O_4$의 표면이 탄소로 뒤덮여 있는 것을 확인할 수 있었다. 이와 달리 $CuFe_2O_4$에서는 $CH_4$ 전환율 및 환원속도가 높았고, 환원반응 후 탄소량 추정결과 $Fe_3O_4$에서보다 훨씬 낮게 나타났다. TEM 분석결과 $Fe_3O_4$ 입자로부터 탄소가 판상구조의 형태로 성장한 것을 확인할 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.