• Journal of Magnetics
• /
• v.2 no.4
• /
• pp.135-137
• /
• 1997

We report the salient features of the magnetic properties of amorphous TM70Cr5Si10B15(TM=Fe, Co, Ni) alloys. The temperature dependence of magnetization for amorphous ribbons were measured by a SQUID and a VSM from 5 K to 700 K under an external field of 10 kOe. Except TM70Cr5Si10B15 that shows a paramagnetic behaviour, both Fe and Co based amorphous alloys show a typical ferromagnetic thermo-magnetization curves. For these two ferromagnetic alloys, the saturation magnetization in the temperature range from 5 K to about 0.4 Tc can be descrived by the Bloch relation, Ms (T)=Ms(0) [1-BT3/2-CT5/2]. The spin wave stiffness constants and the range of exchange interaction were analyzed from the magnetization behaviour. The variation of the magnetic properties are discussed and compared with the composition of the alloys.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.708-709
• /
• 2006

New Al-based alloys with very high ultimate tensile strength were developed in high Al concentration range of 91-95 at.% for Al-Fe-Cr-Ti-M (M: Co and Mo) systems and Al-Fe-Cr-Mo-Ti-Co system by the dispersion of nanoscale quasicrystalline particles in Al phase. The effect of adding elements, M was discussed in the viewpoint of stability of super-cooled liquid state and formation ability of quasicrystalline phase. The P/M Al-Fe-Cr-Ti-M alloys with dispersed nanoscale quasicrystalline particles exhibited ultimate tensile strength of 350MPa at 573K and 200MPa at 673K.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.4
• /
• pp.196-199
• /
• 2004

Seedlayers with low surface energy which increases the density of nucleation sites in the initial growth region of the recording layer deposited on them was studied to reduce grain size in recording layer. The seedlayer with low surface energy was so effective to attain finer grain in magnetic upper-layers. The Ni-Fe-O intermediate layer with low surface energy was found to be effective in reduction of grain size as well as magnetic cluster size of Co-Cr-Ta-Pt recording layer. Furthermore, the reduction of grain size in Co-Cr-Ta-Pt recording layer on Ni-Fe-O intermediate layer with low surface energy led to decrease the noise level in the high recording density region.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.91-94
• /
• 2001

Powder Metallurgy method have been used to fabricate TiC base composite with ferrous binder. TiC base composite has versatile hardness and is usable as sintered, or after heat treatment as required by the given applications. Smooth, round TiC grains impart high wear resistance and lubricity as well known characteristics of this composite. Annealed composite can be formed by conventional machining and be hardened up to 70 H$\_$R/C in vacuum. The optimizing fabrication process enables this composite to improve mechanical properties in heat, wear and corrosion environments. This study has examine the relationship between fabrication condition and mechanical property in TiC-Cr-Mo-Fe Composite.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1514-1516
• /
• 2003

NiCrFe 박막을 이용한 정밀급 박막 스트레인 게이지를 개발하였으며, 그 특성을 요약하면 다음과 같다. 스트레인한계: 5 % 이하, 저항: 350 ${\sim}$ 2,000 ${\Omega}$, 게이지 율: 2.1, 정도: 0.1 %, 피로한계 : $10^6$ at ${\pm}1500{\mu}{\varepsilon}$, 사용온도범위: $-75{\sim}150^{\circ}C$, 온도 출력: ${\pm}1{\mu}{\varepsilon}/^{\circ}C$, 게이지율변화 : +0.009%/$^{\circ}C$ 국산화된 박막 스트레인 게이지는 디지털 로드 셀 등에 적용할 수 있으며, 이 분야의 국내 기술력 향상에 이바지 할 것이다.

• Korean Journal of Materials Research
• /
• v.6 no.8
• /
• pp.796-800
• /
• 1996

질소가스 분위기 중에서 Cu30V70 및 Fe30Cr70 혼합분말을 기계적 합금화 (MA)처리한 결과, 두 합금계에서 비정질화가 관찰되었다. 결정질에서 비정질상으로의 구조변화 과정을 Xtjs 회절 및 중성자 회절법에 의해 관찰되었다. 결정질에서 비정질상으로의 구조변화 과정을 X선 회절 및 중성자 회절법에 의해 관찰하였다. 그 결과, 이 합금계에서의 비정질화는 각 결정구조에서 전형적으로 존재하는 8면체 unit가 선택적으로 붕괴되어 4면체 unit로 변화되어 가는 과정임을 알 수 있었다. 또한, 중성자회절 결과로부터 질소원자는 금속원자로 이루어진 4면체의 중심에 위치하고 있음을 알 수 있었다.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.702-709
• /
• 1995

In this paper we review recent work in our laboratory on nanocomposite CoSm-based films including CoSm with Cr underlayer (CoSm//Cr), exchange-coupled magnetic films consisting of CoSm and FeCo layers (CoSm/FeCo), and CoSm multilayers with nonmagnetic spacing layers of SmO (CoSm/SmO). The emphasis is on detailed investigations of microstructure and magnetic properties for CoSm//Cr films, exchange-spring effects for CoSm/FeCo films, and interlayer effects for (CoSm/ SmO) multilayers.

• Journal of Magnetics
• /
• v.12 no.1
• /
• pp.49-52
• /
• 2007

We investigated annealing effect of microforged powders on magnetic properties and electromagnetic absorption behaviors for ferromagnetic Fe-Cr metal alloy powder-polymer composites. The coercive properties greatly decreased with annealing temperature and the magnetic permeability had significantly increased after microforging and subsequent annealing treatment, due to a reduction in lattice strain of the microforged powders. The power loss in the far field regime also had greatly increased after microforging and subsequent annealing treatment in frequency range from 50 MHz to 6 GHz. As a result, the electromagnetic absorption of ferromagnetic Fe-Cr alloy metal powder-polymer composites was highly improved because of the relaxation of the internal strain during annealing process.

• Korean Journal of Food Science and Technology
• /
• v.28 no.1
• /
• pp.90-98
• /
• 1996

The mineral contents were analyzed for 12 varieties of Korean apples and 9 commercial apple juices by atomic absorption spectrophotometry. On the fresh matter basis, the ash contents of tested apples ranged 0.21-0.48%, Mn 0.20-2.52 ppm, Cu 0.10-1.03 ppm, Fe 0.24-9.88 ppm, Zn 0.09-1.06 ppm, Mg 21.08-99.00 ppm, Ca 15.16-99.56 ppm, K 842.10-1788.10 ppm, Na 10.32-40.53 ppm, P 24.43-90.07 ppm, Pb nd-98.05 ppb, Cd nd-36.08 ppb and Cr 2.25-123.76 ppb. Overally mineral contents of Aori and Jonathan were higher than those of Fuji. The mineral contents of apple cultivated at Wonju, Kangwon and Taegu, $Ky{\check{o}}ngbuk$ were higher than those of the other growing region. The mineral contents of commercial apple juice were ash 0.13-0.36%, Mn 0.24-0.99 ppm, Cu 0.10-0.61 ppm, Fe 0.19-3.70 ppm. Zn 0.20-1.77 ppm, Mg 18.16-49.56 ppm, Ca 14.42-42.30 ppm, K 785.07-1440.30 ppm, Na 14.71-52.58 ppm, P 16.57-63.56 ppm, Pb nd-95.55 ppb, Cd nd-17.65 ppb and Cr 8.60-110.98 ppb, respectively. Comparing mineral contents of apples and commercial apple juices, Cu, Mg, K, Ca and Fe contents of apples were higher and Zn, Na contents were lower than those of apple Juices.

• Journal of the Korean Magnetics Society
• /
• v.15 no.6
• /
• pp.303-306
• /
• 2005

Effect of a ferromagnetic layer thickness on a narrow domain wall width is investigated. It is found that the narrow domain wall is formed in ferromagnetic/nonmagnetic/ferromagnetic multi layer structure with a loc at interlayer exchange coupling, and that the width of the narrow domain wall is affected by the ferromagnetic layer thickness. We performed micromagnetics simulations for the $Fe_1/Cr/Fe_2$ system with the local interlayer exchange coupling, with fixed thickness (20-nm) of $Fe_2$ layer and various $Fe_1$ layer thickness (1, 2, 4, and 6 nm). Consequently, we confirmed that the thinner the $Fe_1$ layer thickness, the thinner the width of the domain wall is formed, because of the surface energy nature of the interlayer exchange coupling.