• 제목/요약/키워드: Fe-Cr

Search Result 1,717, Processing Time 0.038 seconds

Magnetic Force Microscopy (MFM) Study of Remagnetization Effects in Patterned Ferromagnetic Nanodots

  • Chang, Joon-Yeon;Fraerman A. A.;Han, Suk-Hee;Kim, Hi-Jung;Gusev S. A.;Mironov V. L.
    • Journal of Magnetics
    • /
    • v.10 no.2
    • /
    • pp.58-62
    • /
    • 2005
  • Periodic magnetic nanodot arrays were successfully produced on glass substrates by interference laser lithography and electron beam lithography methods. Magnetic force microscopy (MFM) observation was carried out on fabricated nanodot arrays. MFM tip induced magnetization effects were clearly observed in ferromagnetic elliptical nanodots varying in material and aspect ratio. Fe-Cr dots with a high aspect ratio show reversible switching of the single domain magnetization state. At the same time, Co nanomagnets with a low aspect ratio exhibit tip induced transitions between the single domain and the vortex state of magnetization. The simple nanolithography is potentially an efficient method for fabrication of patterned magnetic arrays.

한국에 분포하는 한약자원식물의 무기물 함량에 관한 연구 제 2 보 ( The Mineral Content of Medical Wild Plant Resources in Korea ( II ) )

  • 이상래
    • Korean Journal of Plant Resources
    • /
    • v.3 no.2
    • /
    • pp.115-121
    • /
    • 1990
  • In view of the results to have measured metallic elements which is included in 40 sorts of herb medicines and surveyed their distribution, ninekinds of metals including Co, Ce, Ga, 71, Cd, As, Sbr Bu. Pb, are never orlittle included in almost herb medicines. Other twenty four sorts of ele-ments (Mo, Sc, Be, V, Ni, Su, Se, Ba, Cr, Su, Ti, B, Li, Mg, Ca, Sr, Mnl Fe,Cu, Zn. p, Al, Na, K) are metals that are included in large quentities incomparison with others. Selagirellae Radix contains is kinds of metallicelements more then other herb medicines does. The content of elements ofinorganic metal differs greatly according to the part of herb medicines .

  • PDF

Ion Exchange Separation of Minor Elements from Iron for the Analysis of S/G Sludge

  • Park, Kyoung-Kyun;Choi, Kwang-Soon;Kim, Jong-Goo
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 2005.05a
    • /
    • pp.309-310
    • /
    • 2005
  • Some minor elements(Al, B, Ba, Ca, Cd, Co, Cr, Cu, Gd, Mg, Mn, Mo, Nd, Ni, P, Pb, Si, Sn, Sr, Ti, V, Yb, Zn and Zr) in iron compounds such as the S/G sludge of a power plant were separated from iron by anionic and cationic exchange methods. If a ICP-AES or AAS determination follows this method, minor elements of more than 2 or 20 ppm of Fe can be determined with an error less than 20% except Sn and Mo. Alkaline elements were excluded from this study since they can be easily recovered from an anionic exchange. Application to real sludge samples is ongoing.

  • PDF

Characteristic of Food Waste in Different Types of Restaurants (대중음식점 발생원별 음식물 찌꺼기의 특성)

  • 남성숙
    • The Korean Journal of Food And Nutrition
    • /
    • v.12 no.3
    • /
    • pp.246-251
    • /
    • 1999
  • The purposed of this study was to investigate the efficient recycling of food waste according to the restaurants type. To the investigated of characteristic of food wastes in different types of restaurants we were collected the sample of 60 as Korean 35 Chinese 10 Japanese 5 Western 5 Flour 5 in Swoon. The average water content of food waste was 79.9% and Korean restaurant was 80.3% which was hig-her than that of any other serving type. On the examination of a organic matter content of food waste according to the season crude fiber was higher in may and July crude protein content was higher in January and march than that other seasons. The average pH of food waste was 4,74 C/N ratio was 15.8 and the average cation content was K 0.57% Ca 0.39% Mg 0.22% NaCl 3.36% respectively The aver-age concentration of Fe, Zn, Pb, Cu, Cr, Cd Ni were 154.37 mg/kg 24.79 mg/kg 0.27 mg/kg 5.63 mg/kg 5.49 mg/kg, 0.31mg/kg 1.07mg/kg respectively.

  • PDF

Soft-magnetic Characteristics of Co-based Amorphous Powder Produced by Spinning Water Atomization Process (SWAP)

  • Otsuka, I.;Wada, K.;Watanabe, A.;Kadomura, T.;Yagi, M.
    • Proceedings of the Korean Powder Metallurgy Institute Conference
    • /
    • 2006.09b
    • /
    • pp.784-785
    • /
    • 2006
  • Co-based amorphous powder was produced by a new atomization process "Spinning Water Atomization Process (SWAP)", having rapid super-cooling rate. The composition of the alloys was ($(Co_{0.95}Fe_{0.05})_{1-x}Cr_x$)$_{75}Si_{15}B_{10}$ (x=0, 0.025, 0.05, 0.075). The powders became the amorphous state even if particle size was up to about $500{\mu}m$. The coercive force of powders was about 0.35 - 0.7 Oe. Furthermore, Co-based amorphous powder cores with glass binders were made by cold-pressing and sintering methods. The initial permeability of the core in the frequency range up to 100 kHz was about 110, and the core loss at 100 kHz for Bm = 0.1 T was $350kW/m^3$.

  • PDF

A Study on Oxidation Mechanism in Mechanically Alloyed ODS Ni-base Alloy

  • Kim, I.H.;Kwun, S.I.;Park, J.P.;Lee, W.S.
    • Proceedings of the Korean Powder Metallurgy Institute Conference
    • /
    • 2003.10a
    • /
    • pp.65-66
    • /
    • 2003
  • 1. The oxidation resistance of $Y_{2}O_{3}$ containing Ni-base alloy is superior to that of the alloy without $Y_{2}O_{3}$. 2. The appearance of oxides of Ni-20Cr-20Fe-5Nb-$1Y_{2}O_{3}$ alloy is similar to that of oxides in commercial PM1000 and MA754 alloy. 3. The oxides in ODS alloy are grown mainly at particle boundaries.

  • PDF

Effect of impurities in bath on surface appearance of electrolytic chromate film (전해크로메이트 피막의 표면외관에 미치는 용액중 불순물의 영향)

  • 김명수;김상헌;김영근
    • Journal of the Korean institute of surface engineering
    • /
    • v.30 no.6
    • /
    • pp.412-418
    • /
    • 1997
  • The surface appearance of zinc coating chromated electrochemically was investigated with the concentration of impurities in chromating solution. The chromium content and yellowness of chromated film decreased with more than 0.1g/1 Zn in chromating solution, while white ness of it increased slightly. The chromium content and whiteness of chromated film also decreased with more than 0.1g/1 Fe in chromating solution, but the yellowness of it increased. Chromium content, whiteness and yellowness of chromated film decreased slightly with more than 0.5g/1 $Cr^{3+}$<\TEX>. But the chromium content and surface appearance of chromated film are not influenced with less than 1.0g/1 Pb in chromating sloution.

  • PDF

Analysis of Basic Constituents in Korean Earthworm About Lamnodrilus gotai Hatai (한국산 토룡의 기초성분 분석 -Lamnodrilus gotai Hatai를 대상으로-)

  • Chung, Yong;Lee, Yun-Sil;Lee, Hyo-Min
    • YAKHAK HOEJI
    • /
    • v.31 no.4
    • /
    • pp.224-229
    • /
    • 1987
  • The earthworm(Annelid) is a herbicine which has traditionally been used in the treatment of infectious fever, jaundice, infection of middle ear, laryngitis, pharyngitis, nephritis, headache, toothache and certain urinary tract infections from the olden times. Before the isolation and purification of biologically active components we analyzed the basic constituents(proteins, amino acids, mineral, etc.) with lyophilized powder of Lamnodrilus gotai Hatai. The results were as follows: Minerals detected and quantitatively analyzed were $Ca^#$, $Mg^#$, Fe, Zn, Mn, Cu, Co, Cr, Ni, Ge and Se. Amino acids detected were alanine, phenylalanine, leucine, glutamic acid, tyrosine, threonine, arginine, aspartic acid, methionine, lysine, serine, histidine, isoleucine, glycine, proline and etc. The constituents of proteins, fat, fiber, ash and phosphorous were measured. These constituents were compared and discussed with those of other investigations.

  • PDF

A Chelating Resin Containing 2-(2-Thiazolylazo)-5-dimethylaminophenol as the Functional Group: Synthesis and Sorption Behavior for Some Trace Metal Ions

  • Lee, Won;Lee, Si-Eun;Kim, Mi-Kyoung;Lee, Chang-Heon;Kim, Young-Sang
    • Bulletin of the Korean Chemical Society
    • /
    • v.23 no.8
    • /
    • pp.1067-1072
    • /
    • 2002
  • A new polystyrene-divinylbenzene resin containing 2-(2-thiazolylazo)-5-dimethylamino-phenol (TAM) functional groups has been synthesized and its sorption behavior for nineteen metal ions, including Zr(Ⅳ),Hf(Ⅳ) and U(Ⅵ) has been investigated by batch and column methods. The chelating resin showed high sorption affinity for Zr(Ⅳ) at pH 1-5 and U(Ⅵ) at pH 4. Some parameters affecting the sorption of the metal ions have been detailed. The breakthrough and overall capacities were measured under optimized conditions. The overall capacities of Zr(Ⅳ), Th(Ⅳ) and U(Ⅵ), which showed higher than the other metal ions, were 0.90,0.84 and 0.80 mmol/g, respectively. The elution order of metal ions at pH 4 was evaluated as Zr(Ⅳ) > Th(Ⅳ) > U(Ⅵ) > Cu(Ⅱ) > Hf(Ⅳ) > W(Ⅵ) > Mo(Ⅵ) > In(Ⅲ) > Sn(Ⅳ) > Cr(Ⅲ) > V(Ⅴ) > Fe(Ⅲ). Quantitative recovery of most metal ions except Zr(Ⅳ) was achieved using 2M HNO3. Desorption and recovery of Zr(Ⅳ) was successfully performed with 2 M HClO4 and 2 M HCl.

A Survey of Heavy Metal Concentrations in Casting Work Environment (일부 주조작업장 공기중 분진 중금속 농도)

  • Kim, young-Sik;Kim, Gyu-Kwang;Han, Hong
    • Journal of Environmental Health Sciences
    • /
    • v.18 no.1
    • /
    • pp.1-5
    • /
    • 1992
  • A study was performed to measure the heavy metal concentrations of suspended particles in iron castings during February, 1990. The heavy metal concentrations were analyzed using patricles atomic absorption spectrophotometer. The results were as fellows 1. The concentrations of suspended paticles by casting process were at furnace 4.19mg/m$^{3}$ at pouring 2.93mg/m$^{3}$ at nonferrous furnace 3.90mg/m$^{3}$, at molding 1.17mg/m$^{3}$, jung ja 2.23mg/m$^{3}$, desanding 5.42mg/m$^{3}$, sand treatment 4.82mg/m$^{3}$, finishing 1,20mg/m$^{3}$. 2. Among the total of 8 iron casting workplaces, the concentrations Fe of furnace was 0.36mg/m$^{3}$, Cu of nonferrous furnace 0.02mg/m$^{3}$, Pb of pouring 0.02mg/m$^{3}$, Cr of desanding 0.01mg/m$^{3}$ and Mn of furnace 0.03mg/m$^{3}$.

  • PDF