• 한국자기학회지
• /
• 제21권6호
• /
• pp.198-203
• /
• 2011

연 x선 광흡수 분광법(soft x-ray absorption spectroscopy: XAS)과 연 x선 자기 원편광 이색성(soft x-ray magnetic circular dichroism: XMCD)을 이용하여 스피넬 준강자성 산화물인 $FeV_2O_4$의 전자 구조를 연구하였다. Fe 2p XAS와 V 2p XAS 측정으로 부터 $FeV_2O_4$에서 Fe 이온과 V이온의 고유한 원자가는 각각 약 $Fe^{2.3+}$의 혼합원자가 상태와 약 $V^{3+}$의 상태임을 알 수 있었다. 실험적으로 측정된 Fe 2p XMCD의 신호는 거의 $Fe^{2+}$ 상태에서 기인하였으며, $Fe^{3+}$ 상태는 Fe 2p XMCD의 신호에 거의 기여하지 않는다는 사실이 발견되었다. 그러므로 $FeV_2O_4$의 자성 특성을 결정함에 있어서 자기적으로 정렬된 $Fe^{2+}$ 상태 이온들이 중요한 역할을 한다고 생각된다.

• 마이크로전자및패키징학회지
• /
• 제10권1호
• /
• pp.65-69
• /
• 2003

소결온도에 따른 아이솔레이터/서클레이터용 (Y, Ca)-(Fe, V, In, Al)-O 계 YIG 페라이트의 미세구조와 전자기적 특성을 고찰하였다. $Y_{2.1}Ca_{0.9}Fe_{4.4}V_{0.5}In_{0.05}Al_{0.05}O_{12}$ 조성의 시편들을 일반적인 세라믹 제조 공정에 따라 $1300^{\circ}C$, $1330^{\circ}C$, $1350^{\circ}C$, $1370^{\circ}C$에서 각각 소결하였다. 소결체는 XRD를 이용하여 상분석을 실시하였고, SEM을 이용하여 미세구조를 관찰하였다. VSM을 이용하여 포화자화값$(4{\pi}M_s)$을 측정하였으며, FMR(Ferromagnetic Resonance)실험으로 자기공명반치폭$({\Delta}H)$을 측정하였다. YIG 페라이트의 마이크로파 특성은 Network Analyzer를 이용하여 측정하였다. $Y_{2.1}Ca_{0.9}Fe_{4.4}V_{0.5}In_{0.05}Al_{0.05}O_{12}$ 조성의 YIG 페라이트는 $1350^{\circ}C$에서 소결시 가장 높은 밀도값과 포화 자화$(4{\pi}M_s)$ 값을 나타내었고, 가장 낮은 자기 공명 반치폭$({\Delta}H)$ 값을 나타내었다.

• Bulletin of the Korean Chemical Society
• /
• 제19권6호
• /
• pp.654-660
• /
• 1998

$[Fe^{II}Fe^{III}BPLMP(OAc)_2](BPh_4)_2$ (1), a new model for the reduced form of the purple acid phosphatases, has been synthesized by using a dinucleating ligand, 2,6-bis[((2-pyridylmethyl)(6-methyl-2-pyridylmethyl)amino) methyl]-4-methylphenol (HBPLMP). Complex I has been characterized by X-ray diffraction method as having (μ-phenoxo)bis(acetato)diiron core. Complex 1 was crystallized in the monoclinic space group C2/c with the following cell parameters: a=41.620(6) Å, b=14.020(3) Å, c=27.007(4) Å, β=90.60(2)°, and Z=8. The iron centers in the complex 1 are ordered as indicated by the difference in the Fe-O bond lengths which match well with typical $Fe^{III}-O\; and\; Fe^{II}-O$ bond lengths. Complex 1 has been studied by electronic spectral, NMR, EPR, SQUID, and electochemical methods. Complex 1 exhibits strong bands at 592 nm, 1380 nm in $CH_3CN$ (ε = 1.0 × 103 , 3.0 × 102). These are assigned to $phenolate-to-Fe^{III}$ and intervalence charge-transfer transitions, respectively. Its NMR spectrum exhibits sharp isotropically shifted resonances, which number half of those expected for a valence-trapped species, indicating that electron transfer between $Fe^{II}\;and\;Fe^{III}$ centers is faster than NMR time scale. This complex undergoes quasireversible one-electron redox processes. The $Fe^{III}_2/Fe^{II}Fe^{III}\;and\;Fe^{II}Fe^{III}/Fe^{II}_2$ redox couples are at 0.655 and -0.085 V vs SCE, respectively. It has $K_{comp}=3.3{\times}10^{12}$ representing that BPLMP/bis(acetate) ligand combination stabilizes a mixed-valence $Fe^{II}Fe^{III}$ complex in the air. Complex 1 exhibits a broad EPR signal centered near g=1.55 which is a characteristic feature of the antiferromagnetically coupled high-spin $Fe^{II}Fe^{III}$ system $(S_{total}=1/2)$. This is consistent with the magnetic susceptibility study showing the weak antiferromagnetic coupling $(J= - 4.6\;cm^{-1},\; H= - 2JS_1{\cdot}S2)$ between $Fe^{II}\; and \;Fe^{III}$center.

• 한국결정성장학회지
• /
• 제18권6호
• /
• pp.248-252
• /
• 2008

전기전도성이 우수하면서 입자 크기가 작은 $LiFePO_4$ 분말을 얻기 위해서, 이종원소(Cr+B 또는 Cr+Al) 도핑이 $LiFePO_4$의 전기전도도에 미치는 영향과 열처리 조건이 입자 크기에 미치는 영향에 대해서 조사하였다. 조성이 $LiFe_{0.965}Cr_{0.03}B_{0.005}PO_4$ and $LiFe_{0.065}Cr_{0.03}Al_{0.005}PO_4$인 두 종류의 분말을 기계화학적 밀링법으로 혼합 후 $675{\sim}759^{\circ}C$에서 $5{\sim}10$시간 열처리하여 합성하였다. 이종원소 도핑은 입자성장을 촉진하였고 전기전도도를 높이는 효과가 있었다. $LiFe_{0.065}Cr_{0.03}Al_{0.005}PO_4$의 전기전도도는 $1{\times}10^{-8}S/cm$로 도핑하지 않은 것의 $5{\times}10^{-10}S/cm$보다 높았다.

• 한국균학회지
• /
• 제28권1호
• /
• pp.60-65
• /
• 2000

할미송이버섯으로부터 3단계를 거처 분자량이 각각 18 kDa(FE-1)과 18.2 kDa(FE-2)인 두 개의 혈전용해효소를 분리 정제하였다. 이 효소들은 지금까지 알려진 혈전용해 효소의 질량에 비해 비교적 작았고 두 효소(FE-1과 FE-2)의 15번째까지의 N-terminal amino acid서열은 A-L-Y-V-G-X-S-P-X-Q-Q-S-L-L-V로 같았다. FE-1은 ICP-MS의 결과 $Zn^{2+}$을 mole당 0.98 mole 포함하고 있는 metalloprotease로 pH 7.5와 $55^{\circ}C$에서 가장 큰 활성을 나타내고, 1,10-phenanthroline의 첨가 시 저하된 활성은 $Zn^{2+}$나 $Co^{2+}$의 첨가에 의해 재생되었다.

• Corrosion Science and Technology
• /
• 제13권4호
• /
• pp.145-151
• /
• 2014

The objectives of this study are to investigate the effect of the concentration ratios of Ni and Fe ions on crud deposition onto the fuel cladding surface in the simulated primary environments of a pressurized water reactor. Crud deposition tests were conducted in the Ni and Fe concentration ratios of 20:20 ppm, 39:1 ppm and 1:39 ppm at $325^{\circ}C$ for 14 days. In the case of the same Ni and Fe ion ratio (20:20), nickel ferrite with a polyhedral shape was formed. Nickel oxide deposits with a needle shape were formed in the condition of high Ni to Fe ion ratio (39:1), While polyhedral iron oxide and needle-like nickel oxide formed in the condition of low Ni to Fe ion ratio (1:39). The amount of deposits increased, when Fe oxides were formed. This indicates that Fe rich oxides stimulated Ni oxide deposition.

• Corrosion Science and Technology
• /
• 제13권2호
• /
• pp.41-47
• /
• 2014

The isothermal corrosion tests of several types of stainless steels, Ni-based alloys, and ferritic-martensitic steels (FMS) were carried out at the temperature of 550 and $650^{\circ}C$ in SFR S-$CO_2$ environment (200 bar) for 1000 h. The weight gain was greater in the order of FMSs, stainless steels, and Ni-based alloys. For the FMSs (Fe-based with low Cr content), a thick outer Fe oxide, a middle (Fe,Cr)-rich oxide, and an inner (Cr,Fe)-rich oxide were formed. They showed significant weight gains at both 550 and $650^{\circ}C$. In the case of austenitic stainless steels (Fe-based) such as SS 316H and 316LN (18 wt.% Cr), the corrosion resistance was dependent on test temperatures except SS 310S (25 wt.% Cr). After corrosion test at $650^{\circ}C$, a large increase in weight gain was observed with the formation of outer thick Fe oxide and inner (Cr,Fe)-rich oxide. However, at $550^{\circ}C$, a thin Cr-rich oxide was mainly developed along with partially distributed small and nodular shaped Fe oxides. Meanwhile, for the Ni-based alloys (16-28 wt.% Cr), a very thin Cr-rich oxide was developed at both test temperatures. The superior corrosion resistance of high Cr or Ni-based alloys in the high temperature S-$CO_2$ environment was attributed to the formation of thin Cr-rich oxide on the surface of the materials.

• 열처리공학회지
• /
• 제17권2호
• /
• pp.87-93
• /
• 2004

Nitrocarburizing was carried out with various $CH_4$ gas composition with 4 torr gas pressure at $570^{\circ}C$ for 3 hours and post oxidation was carried out with 100% $O_2$ gas atmosphere with 4 torr at different temperatures for various time. In the case of plasma nitrocarburizing, It is that the ratio of ${\varepsilon}-Fe_{2-3}$(N, C) and ${\gamma}^{\prime}-Fe_4$(C, N), which comprise the compound layer phase, depend on concentrations of $N_2$ gas and $CH_4$ such that when the concentration of $N_2$ and $CH_4$ increased, the ratio of ${\gamma}^{\prime}-Fe_4$(C, N) decreased, but the ratio of ${\varepsilon}-Fe_{2-3}$(N, C) increased. The thickness of compound layer consistently increased as gas concentration increased regardless of $N_2$ and $CH_4$ expect when the concentration of $CH_4$ was 3.5 volume%, it decreased insignificantly. When oxidizing for 15min in the temperature range of $460{\sim}570{^\circ}C$, the study found small amount of $Fe_3O_4$ at the temperature of $460{^\circ}C$ and also found that amounts of $Fe_2O_3$. and $Fe_3O_4$ on the surface and amount of ${\gamma}^{\prime}-Fe_4$(C, N) in the compound layer increased as the increased over $460^{\circ}C$, but the thickness of the compound layer decreased. Corrosion resistance was influenced by oxidation times and temperature.

• Journal of Magnetics
• /
• 제10권1호
• /
• pp.33-35
• /
• 2005

Perpendicular magnetization curves and crystal textures of $[Pd(0.8 nm)/Co(0.8 nm)]_5/FeMn$ multilayers having an exchange-biased perpendicular magnetic anisotropy as a function of FeMn thickness and annealing temperature were measured. As FeMn thickness increases from 0 to 21 nm, the perpendicular exchange biasing field ($H_{ex}$) obtained the maximum value of 130 Oe at FeMn thickness 12 nm. As the annealing temperature increases to $240^{\circ}C$, the H_ex increased from 115 Oe to 190 Oe and the exchange-biased perpendicular magnetic anisotropy disappeared at $330^{\circ}C$.

• 한국자기학회지
• /
• 제17권3호
• /
• pp.124-127
• /
• 2007

비정질 $Co_{70.5}Fe_{4.5}Si_{15}B_{10}$층을 갖는 자기터널접합(magnetic tunneling junctions; MTJ)를 연구하였다. 비정질 자유층이 MTJ의 스위칭 특성에 미치는 영향을 중점적으로 이해하기 위하여 기존의 사용된 CoFe 그리고 NiFe층들을 대신하여 비정질 강자성체 CoFeSiB을 사용하였다. CoFeSiB은 CoFe과 NiFe보다 각각 낮은 포화자기장($M_s:\;560\;emu/cm^3$)과 높은 자기이방성 상수($K_u:\;0.2800\;erg/cm^3$)를 갖는다. CoFeSiB층들의 사이에 1.0 nm Ru층 삽입시 $-0.003\;erg/cm^3$ 교환결합에너지($J_{ex}$)를 나타내었다. $Si-SiO_2-Ta$ 45/Ru 9.5/IrMn 10/CoFe 7/$AlO_x$/CoFeSiB 7 또는 CoFeSiB (t)/Ru 1.0/CoFeSiB (7-t)/Ru 60(in nm) MTJ 구조의 터널접합에 대하여 실험 및 시뮬레이션 결과를 통하여 낮은 $J_{ex}$에 기인하는 스위칭 자기장(switching field; $H_{sw}$)의 시료 크기 의존성이 나타나는 것을 알 수 있었다. CoFeSiB 합성형 반강자성 구조는 micrometer뿐만 아니라 submicrometer 시료 크기영역에서도 보자력($H_c$)의 감소와 민감도를 증가 시킴으로써 자기 스위칭 특성에 유리한 것으로 확인 되었다.