• Journal of the Korean Ceramic Society
• /
• v.40 no.6
• /
• pp.507-512
• /
• 2003

The LiN $i_{l-y}$ $Co_{y}$ $O_2$ samples were synthesized at 80$0^{\circ}C$ and 85$0^{\circ}C$, by the solid-state reaction method, from the various starting materials LiOH, L $i_2$C $O_3$, NiO, NiC $O_3$, $Co_3$ $O_4$, CoC $O_3$, and their electrochemical properties are investigated. The LiN $i_{l-y}$ $Co_{y}$ $O_2$ pre-pared from L $i_2$C $O_3$, NiO, and $Co_3$ $O_4$ exhibited the $\alpha$-NaFe $O_2$ structure of the rhombohedral system (space group; R3m). As the Co content increased, the lattice parameters a and c decreased. The reason is that the radius of Co ion is smaller than that of Ni ion. The increase in da shows that two-dimensional structure develops better as the Co content increases. The LiN $i_{0.7}$ $Co_{03}$. $O_2$［HOO(800,0.3)] synthesized at 80$0^{\circ}C$from LiOH, NiO, and $Co_3$ $O_4$ exhibited the largest first discharge capacity 162 mAh/g. The size of particles increases roughly as the valve of y increases. The samples with the larger particles have the larger first discharge capacities. The cycling performances of the samples with the first discharge capacity larger than 150 mAh/g were investigated. The LiN $i_{0.9}$ $Co_{0.1}$ $O_2$［COO(850,0.1)］ synthesized at 85$0^{\circ}C$ from L $i_2$C $O_3$, NiO, and $Co_3$ $O_4$ showed an excellent cycling performance. The sample with the larger first discharge capacity will be under the more severe lattice destruction, due to the expansion and contraction of the lattice during intercalation and deintercalation, than the sample with the smaller first discharge capacity. As the first discharge capacity increases, the capacity fading rate thus increases.increases.s.s.s.

• Microbiology and Biotechnology Letters
• /
• v.20 no.5
• /
• pp.574-582
• /
• 1992

Exo-xylanase encoded by the xylA gene of Bacillus stearothermoPhillus was produced from Escherichia coli ]M109 carrying a recombinant plasmid pMGL Synthesis of the enzyme was observed to be cell-associated, and about 94% of the enzyme synthesized was located in the cytoplasmic region. The maximum production was attained when the E. coli strain was grown at $37^{\circ}C$ for 8 hours on the medium containing 0.5% fructose, 1.0% tryptone, 1.0% sodium chloride, and 0.5% yeast extract. The exo-xylanase was purified to homogeneity using a combination of salting out with ammonium sulfate, DEAE-Sepharose CL-6B ion exchange chromatography, Sephadex G-IOO gel filtration, and Sephadex G-150 gel filtration. The' purified enzyme was most active at pH 6.0 and $45^{\circ}C$. $Ca^{2+}$ and $Co^{2+}$ activated the exo-xylanase activity by about 20% while $Ag^{2+}$, $Fe^{2+}$, $Mg^{2+}$ and $Zn^{2+}$ inhibited the enzyme activity by up to 60%. The $K_m$, value on p-nitrophenyl-$\beta$-D-xylanopyranoside was 2.75 mM. The enzyme had a pI value of 4.7. The estimated molecular weight of the native protein was 200,000 daL SDS-polyacrylamide gel electrophoresis analysis suggested that the native enzyme was a trimer composed of three identical 66,000 da!. polypeptides. The purified enzyme efficiently converted all the xylo-oligosaccharides tested to xylose. It was also confirmed that the enzyme split xylans in an exo-manner even though the degree of hydrolysis was fairly low. The xylanolytic enzyme was, therefore, classified to be one of the few bacterial exo-xylanases lacking transferase activity.

• Korean Journal of Food Science and Technology
• /
• v.30 no.1
• /
• pp.175-183
• /
• 1998

Yulmoo Mul-kimchi was prepared by fermentation of the mixture of 1 part of leafy radish and 2.75 parts of water. It is thought that during the kimchi fermentation both the biosynthesis and destruction of ascorbic acid occurred at the same time. So the ascorbic acid content in Kimchi broth was strongly influenced by the environment of the processing period. In the present studies, an attempt had been made to elucidate the effect of water quality on the content of ascorbic acid and the population change of microorganism during Mul-kimchi fermentation. Five kinds of water such as tap water, an underground water, one commercially available processed water, distilled water and triply distilled water were examined. Nevertheless there were no differences in the population of microorganism and the pattern of acid formation among the five different kind of waters, a large variation of ascorbic acid content was observed. The ascorbic acid content of Kimchi prepared with triply distilled water showed the highest of 7.2 mg% in contrast to 3.37 mg% in tap water kimchi, and 5.72 mg% in the kimchi using underground water which has relatively high concentration of Ca. These results suggested that pure water free of metal ions might prevent the destruction of ascorbic acid during the fermentation. The considerable amount of ascorbic acid in the Kimchi with underground water might be due to Ca ion in the water.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.5
• /
• pp.479-482
• /
• 1991

The medical use of Acer mono MAX. and Betula costata T. sap has had the long history in Korea. So the mineral and sugar contents of these sap gathered in Mt. Jiri area at spring were analyzed to investigate the scientific base of folk remedies by using ion liquid chromatography and high performance liquid chromatography. The values of chlorine and sulfate in Acer mono MAX. were 11.5 mg/l and 176.7 mg/l, and in Betula costata T. 26.5 mg/l and 162.4 mg/l, respectively. The values of potassium, sodium, calcium and magnesium in Acer mono MAX. were 67.9 mg/l, 5.6 mg/l, 73.8 mg/l and 4.5 mg/l, and in Betula costata T. were 152.1 mg/l, 9.7 mg/l, 39.2 mg/l and 5.7 mg/l, respectively. The values of copper, zinc and manganese in Acer mono MAX. were 0.057 mg/l, 0.483 mg/l and 5.071 mg/l, and copper, zinc, mangances and iron in Betula costata T. were 0.038 mg/l, 1.584 mg/l, 4.354 mg/l and 2.511 mg/l, respectively. The values of sucrose in Acer mono MAX. were 27.29 mg/l, glucose and fructose in Betula costata T. were 0.97 g/l and 3.05 g/l, respectively.

• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2860-2866
• /
• 2020

Oxide dispersion-strengthened materials W-1wt%Pr₂O₃ and W-1wt%La₂O₃ were synthesized by wet chemical method and spark plasma sintering. The field emission scanning electron microscopy (FE-SEM) analysis, XRD and Vickers microhardness measurements were conducted to characterize the samples. The irradiations were carried out with a 5 keV helium ion beam to fluences up to 5.0 × 10²¹ ions/m² under 600 ℃ using the low-energy ion irradiation system. Transmission electron microscopy (TEM) study was performed to investigate the microstructural evolution in W-1wt%Pr₂O₃ and W-1wt%La₂O₃. At 1.0 × 10²⁰ He⁺/m², the average loops size of the W-1wt%Pr₂O₃ was 4.3 nm, much lower than W-1wt% La₂O₃ of 8.5 nm. However, helium bubbles were not observed throughout in both doped W materials. The effects of pre-irradiation with 1.0 × 10²¹ He⁺/m² on trapping of injected deuterium in doped W was studied by thermal desorption spectrometry (TDS) technique using quadrupole mass spectrometer. Compared with the samples without He⁺ pre-irradiation, deuterium (D) retention of doped W materials increased after He⁺ irradiation, whose retention was unsaturated at the damage level of 1.0 × 10²²D₂⁺/m². The present results implied that irradiation effect of He⁺ ions must be taken into account to evaluate the deuterium retention in fusion material applications.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.2
• /
• pp.5-9
• /
• 2007

This study carried out to investigate the removal capacity of heavy metals such as Cu (II), Zn (II) and Cd (II) dissolved in aqueous solution in the soils collected from Hyeon-Dong (HD), San-seong (SS), Keum-chon (KC) and Keum-Hac (KH) located in the upper Banbyun stream. The pH of all the soils was weak alkali such as 8.8 9.2. According to the analysis of chemical composition of the soils, the amount of $SiO_2$, $AlO_2$ and CaO were similar in all tested soils. However, the amount of $K_2O$, $FeO_3$ and MgO were different from each soil. The XRD measurement with these soils showed that quartz and feldspar were presented in all tested soils, and the distribution of kaoline, illite, montmorillonite, vermiculite and calcite were different from each soil. The results of the removal capacity of heavy metals indicated that all the soils had more than 98% of the removal efficiency of Cu (II), Zn (II) and Cd (II), and among the heavy metals, Cu (II) was removed the most effectively. These results suggested that the soils collected from the upper Banbyun stream have the high removal capacity of heavy metals, and these soils could be used for the banking a river around the abandoned mine area, containing the higher concentrations of heavy metals than the usual stream.

• Journal of the Mineralogical Society of Korea
• /
• v.27 no.1
• /
• pp.41-51
• /
• 2014

The four natural zeolites collected in Pohang and Gyeongju area, Kyungsangbuk-do, Korea, were characterized by XRD, XRF, DTA, TGA, and CEC analysis. The primary species of these zeolite are heulandite, modenite, illite, and illite in Kuryongpo (Ku), Pohang (Po), Yangbuk-A (Ya-A), and Yangbuk-B (Ya-B) samples. The XRF analysis showed that the four zeolites contain Si, Al, Na, K, Mg, Ca, and Fe. Cation exchange capacity of Kuryongpo (Ku) zeolite was the highest compared to other zeolites. The adsorption capacities of Cs and Sr in the four natural zeolites were compared at $25^{\circ}C$. On the basis of adsorption data Langmuir and Freundlich adsorption isotherm model were confirmed. The equilibrium process was descried well by Langmuir isotherm model. This study shows that Ya-A zeolite is the most efficient for the $Cs^+$ and $Sr^{2+}$ ion adsorption compared to the other natural zeolites.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.6
• /
• pp.33-42
• /
• 2012

This study was performed to find the problems according to interference factors (organic matter, pH, Cr, Mn, Fe, clay, and etc.) when we analyzed the hexavalent chromium [Cr(VI)] in soils using UV/VIS spectrometer (US EPA 7196A), attempted to evaluate the domestic applicability of analytical method (US EPA 7199) using IC-UV/VIS spectrometer as alternative method. The recovery rate of certified reference materials was 75.0% (US EPA 7196A) and 101.4% (US EPA 7199) by the analytical methods. As the results of performing QA/QC about US EPA 7199, method detection limit (MDL) and limit of quantification (LOQ) were 0.062 mg/kg, 0.196 mg/kg, respectively. The LOQ of US EPA 7199 was lower than that of the current soil official testing method in Korea (0.5 mg/kg). Cr(VI) contents in 23 soil samples were compared by the analytical methods of EPA 7196A and 7199. Cr(VI) was detected in 13 of 23 soil samples by EPA 7196A, while EPA 7199 was not detected in any soil samples. The Cr(VI) content in 23 soil samples by EPA 7196A was not clearly correlated with Cr, Fe, Mn and clay content in the soil samples. However, the contents of Cr(VI) and organic matter of the soil samples had the highest coefficient of determination ($R^2$) of 0.80. In order to evaluate the correlation between the recovery rates of Cr(VI) and organic matter contents in the soil samples, the recovery rates of 5 soil samples added Cr(VI) standard solution were analyzed by the analytical methods. According to the results, the higher the organic matter contents in soil samples, the lower the recovery rates of Cr(VI) by US EPA 7196, while in case of US EPA 7199, the recovery rates were stable regardless of the organic matter contents.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.417-417
• /
• 2016

Global environmental deterioration has become more serious year by year and thus scientific interests in the renewable energy as environmental technology and replacement of fossil fuels have grown exponentially. Photoelectrochemical (PEC) cell consisting of semiconductor photoelectrodes that can harvest light and use this energy directly to split water, also known as photoelectrolysis or solar water splitting, is a promising renewable energy technology to produce hydrogen for uses in the future hydrogen economy. A major advantage of PEC systems is that they involve relatively simple processes steps as compared to many other H2 production systems. Until now, a number of materials including TiO2, WO3, Fe2O3, and BiVO4 were exploited as the photoelectrode. However, the PEC performance of these single absorber materials is limited due to their large charge recombinations in bulk, interface and surface, leading low charge separation/transport efficiencies. Recently, coupling of two materials, e.g., BiVO4/WO3, Fe2O3/WO3 and CuWO4/WO3, to form a type II heterojunction has been demonstrated to be a viable means to improve the PEC performance by enhancing the charge separation and transport efficiencies. In this study, we have prepared a triple-layer heterojunction BiVO4/WO3/SnO2 photoelectrode that shows a comparable PEC performance with previously reported best-performing nanostructured BiVO4/WO3 heterojunction photoelectrode via a facile solution method. Interestingly, we found that the incorporation of SnO2 nanoparticles layer in between WO3 and FTO largely promotes electron transport and thus minimizes interfacial recombination. The impact of the SnO2 interfacial layer was investigated in detail by TEM, hall measurement and electrochemical impedance spectroscopy (EIS) techniques. In addition, our planar-structured triple-layer photoelectrode shows a relatively high transmittance due to its low thickness (~300 nm), which benefits to couple with a solar cell to form a tandem PEC device. The overall PEC performance, especially the photocurrent onset potential (Vonset), were further improved by a reactive-ion etching (RIE) surface etching and electrocatalyst (CoOx) deposition.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.4
• /
• pp.211-217
• /
• 2001

This study was conducted to evaluate the effect of Zn and Cu on physiological responses of tobacco at the different leaf ages for the purpose of phytoremediation of heavy metal contaminated field. Plant height was significantly decreased at Zn and Cu concentrations of 1.0 mM or higher. Especially, root dry weight decreased more (50% reduced) than shoot dry weight. Zn and Cu accumulation in the shoot and root was dramatically increased after 2.0 mM treatment. The accumulation pattern was different by leaf aging in that Zn accumulated more in senescence leaf and Cu accumulated more in growing leaf. The amounts of heavy metal accumulations per plant were 146,000 mg/kg for Zn and 20,500 mg/kg for Cu at 2.0 mM treatment. The proper harvesting time would be suggested as vegetative growth stage for Zn and reproductive stage for Cu. The concentrations of other inorganic ions (Mg, Mn, Fe) were decreased when Zn and Cu concentrations were increased. Cu concentration and Zn concentration of both shoot and root were decreased in Zn treatment and Cu treatment, respectively.