• Journal of Magnetics
• /
• 제8권2호
• /
• pp.89-92
• /
• 2003

The tunneling magnetoresistance (TMR) of a ramp-edge type junction with SrTiO$_3$barrier layer has been stud-ied. The samples with a structure of glass/NiO(600${\AA}$)/Co(100${\AA}$)/SrTiO$_3$(400 ${\AA}$)/SrTiO$_3$(20-100${\AA}$)/NiFe(100${\AA}$) were prepared by the sputtering and etched by the electron cyclotron (ECR) argon ion milling. Nonlinear I-V characteristics were obtained from a ramp-type tunneling junctions, having the dominant difference between two different external magnetic fields (${\pm}$100 Oe) perpendicular to the junction edge line. In the SrTiO$_3$ barrier thickness of 40${\AA}$, the TMR was 52.7% at a bias voltage of -50 mV The bias voltage dependence of resistance and TMR in a ramp-type tunneling junction was similar with those of the layered TMR junction.

• Journal of Magnetics
• /
• 제6권3호
• /
• pp.90-93
• /
• 2001

Co/$Al_O_3$/NiFe and CO/$Al_O_3$/Co tunnel junctions were fabricated by a radio frequency magnetron sputtering at room temperature with hard mask on glass and $4^{\circ}$ tilt cut Si (111) substrates. The barrier layer was formed through two steps. After the Al layer was deposited, it was oxidized in the chamber of a reactive ion etching system (RIE) with $O_2$plasma at various conditions. The dependence of the TMR value and junction resistance on the thickness of Al layer (before oxidation) and oxidation parameters were investigated. Magnetoresistance value of 7% at room temperature was obtained by optimizing the Al layer thickness and oxidation conditions. Circular shape junctions on $4^{\circ}$tilt cut Si (111) substrate showed 4% magnetoresistance. Photovoltaic energy conversion effect was observed with the cross-strip geometry junctions on Si substrate.

• 동아시아식생활학회지
• /
• 제20권5호
• /
• pp.751-758
• /
• 2010

Prunus mume is well known contain many functional materials that play beneficial roles in the human body. Studies have found that many organic acids and polyphenol compounds exist in Prunus mume. In this study, content of total polyphenols and flavonoids, antioxidative activity and cytotoxicity of ethanol extract from Prunus mume were measured Contents of total polyphenolic and total flavonoid compounds in ethanol extract from Prunus mume were 16.92 mg/g and 59.95 mg/g, respectively. The $IC_{50}$ of ethanol extract from Prunus mume were $237.72 {\mu}g$/assay and $239.58 {\mu}g$/assay by DPPH and ABTS radical cation scavenging test, respectively. Additionally, ferric ion reducing antioxidant power (FRAP) value of ethanol extract from Prunus mume was 0.94 mM ($FeSO_4$ eq.) by $800 {\mu}g$/assay. Cytotoxicity of Prunus mume against five kinds of cancer cell lines increased as the extract concentration increased Especially, cytotoxicity of the ethanol extract against A-549 (lung cancer line) was higher than that against any other cancer cell line by both MTT and SRB assay. These results show that ethanol extract of Prunus mume has considerably high antioxidative and cytotoxic activities.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
• /
• pp.97-102
• /
• 1998

Transition metal Cr3+ and Fe3+ ion was diffused in white sapphire {0001}, {1010} crystal plane which were grown by the Verneuil method. It enhanced and changed the physical, electrical and optical properties of sapphires. After mixing the metallic oxide and metal powder, it were used for diffusion. Metallic oxide was synthesized by precipitation method and it's composition was mainly alumina which doped with chromium or ferric oxide. In case using metallic oxide, the dopping was slowly progressed and it needed the longer duration time and higher temperature, relatively. Metallic powder was vapoured under 1x10-4 torr of vacuum pressure at 1900(iron metal) and 2050(chromium)℃, first step. Diffusion condition were kept by 6atm of N2 accelerating pressure at 2050∼2150℃. Each surface density of sapphire crystal are 0.225(c) and 0.1199atom/Å2(a). The color of the Cr-doped sapphires was changed to red. Dopping reaction was come out more deep in th plane of {1010} than {0001}. It was speculated that the planar density was one of the factors to determine diffusion effect.

• 한국결정성장학회지
• /
• 제2권2호
• /
• pp.1-1
• /
• 1992

YIG는 분해용융을 하므로 FZ법을 개량한 TSFZ법을 적용하여 YIG단결정을 성장시켰다. 최적성장조건은 성장속도 1mm/hr, 상호역방향 회전속도 30rpm이었으며 소결 및 결정성장시 산화분위기를 필요로 하였고 성장된 결정의 질은 소결정도에 의해 많은 영향을 받았다. Melt내 기포의 생성은 철이온과 산소와의 반응에 의해 발생되었으며 기포의 밀도는 성장속도가 빨라질수록 증가하였다. 성장속도는 1mm/hr 이상일 경우에는 Cell Growth가 발생하였으며 결정의 가장자리에서 전위밀도가 증가하였다. 또한 성장된 결정에서는 제2상으로 Orthoferrite가 관찰되었다.

• 한국재료학회지
• /
• 제24권7호
• /
• pp.339-343
• /
• 2014

$CaWO_4:Sm_x$(x = 0, 0.5, 1.0, 1.5, 2.0 mol%) white phosphors with different concentrations of $Sm^{3+}$ ions were synthesized using the hydrothermal method. The crystal structure, surface, and optical properties of the $CaWO_4:Sm_x$ phosphors were investigated using X-ray diffraction(XRD), field-emission scanning electron microscopy(FE-SEM), photoluminescence(PL) and photoluminescence excitation(PLE). From the XRD results, the crystal structure of the $CaWO_4:Sm$ phosphors was found to be tetragonal. The $CaWO_4:Sm$ phosphors became more cohesive with increasing $Sm^{3+}$-ion concentration. The photoluminescence excitation(PLE) peak of the phosphors, at around 250 nm, was ascribed to the transition from the 1A1 ground-state to the high-vibration level of 1T2 in the $WO{_4}^{2-}$ complex. The maximum emission spectra of the phosphors were observed when the $Sm^{3+}$ concentration was 0.5 mol%. The luminescence intensity of the $CaWO_4$ phosphors was decreased for $Sm^{3+}$ concentrations greater than 0.5 mol%.

• 대한치과기공학회지
• /
• 제35권4호
• /
• pp.343-352
• /
• 2013

Purpose: The purpose of this study was to investigate to effect of the ZrN coated on corrosion resistance and physical property of dental Co-Cr alloys using various instruments. Methods: The specimens were used, respectively, for experiment, Arc Ion plating was carried out for dental casting alloys using ZrN coated materials with nitrogen gas. ZrN coated surface of each specimen was observed with field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), vickers hardness tester, and electrochemical tester. Results: The current density of ZrN coated specimen was smaller than that of non-coated specimen in 0.9% NaCl solution. Pit nucleated at scratch of specimen. The pitting corrosion resistant |$E_{max}-E_{rep}$| increased in order of ZrN coated (110 mV), and non-coated wire (100 mV). Conclusion: The corrosion potential of the ZrN coated specimen was comparatively high. the surface of ZrN coated specimen was more smooth than that of other kinds of non-coated specimen. ZrN coated surface showed higher hardness than that of non-coated surface.

• 한국전기전자재료학회논문지
• /
• 제24권8호
• /
• pp.674-677
• /
• 2011

The dependency of sputtering power on the electrical performances in amorphous HIZO-TFT (hafnium-indium-zinc-oxide thin film transistors) has been investigated. The HIZO channel layers were prepared by using radio frequency (RF) magnetron sputtering method with different sputtering power at room temperature. TOF-SIMS (time of flight secondary ion mass spectrometry) was performed to confirm doping of hafnium atom in IZO film. The field effect mobility (${\mu}FE$) increased and threshold voltage ($V_{th}$) shifted to negative direction with increasing sputtering power. This result can be attributed to the high energy particles knocking-out oxygen atoms. As a result, oxygen vacancies generated in HIZO channel layer with increasing sputtering power resulted in negative shift in Vth and increase in on-current.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 금형가공,미세가공,플라스틱가공 공동 심포지엄
• /
• pp.49-53
• /
• 2005

The objective of this research was to establish the size limitation of micro metal forming and analyze the formability of foil. Flat-rolled ultra thin metallic copper foil($3{\mu}m$ in thickness) was used as a forming material and foil was annealed to improve the formability at the temperature of $385^{\circ}C$. Forming die was fabricated by using etching technique of DRIE(deep reactive ion etching) and HNA isotropic etching. For the forming die and coupe. foil were vacuum packed and the forming was conducted as applying hydrostatic pressure of 250MPa to the vacuum packed unit. We successfully obtained the micro channels of $12\~14{\mu}m$ width and $9{\mu}m$ depth from micro forming process we designed. We also investigated the thickness strain distribution of foil from experiment and FE simulation result. Micro channels had a good formability of smooth surface and size accuracy. We expect that micro metal forming technology will be applied to production of micro parts.

• 한국식품조리과학회지
• /
• 제32권3호
• /
• pp.325-332
• /
• 2016

Purpose: The purpose of this study was to investigate the stability of anthocyanin pigment extract from Yangha (Zingiber mioga ROSC). Methods: Yangha extract was investigated for the effects of metal ion, temperature, light, heating time, sugars, and organic acids on the stability of anthocyanin pigments. Results: Yangha pigment was more stable than other anthocyanin pigments at unstable temperatures. The stability of anthocyanin pigment significantly decreased one day after exposure to light. All tested sugars decreased the abundance of Yangha pigments, with highest levels in the presence of sucrose, and progressive decrease in the presence of maltose, fructose, glucose and galactose, in order. Among the organic acids tested, citric acid and malic acid were the most effective in stabilizing the Yangha pigment, followed by acetic acid and formic acid. Most metal ions except $Fe^{2+}$ were effective in stabilizing the pigment. Conclusion: These results provide useful reference data for the use of pigments from Yangha in processed foods.