• Journal of the Korean Society for Heat Treatment
• /
• v.23 no.3
• /
• pp.150-155
• /
• 2010

Generally, plasma nitriding process has composed with a nitriding layer within glow discharge region occurred by energy exchange. The dissociations of nitrogen molecules are very difficult to make neutral atoms or ionic nitrogen species via glow discharge area. However, the captured electrons in which a double-folded screen with same potential cathode can stimulate and come out some single atoms or activated ionic species. It was showed an important thing that is called "hat is a dominant component in this nitriding process?" in plasma nitriding process and it can take an effective species for without compound layer. During a plasma nitriding process, it was able to estimate with analyzing and identification by optical emission spectroscopy (OES) study. And then we can make comparative studies on the nitrogen transfer with plasma nitriding and ATONA process using plasma diagnosis and metallurgical observation. From these observations, we can understand role of active species of nitrogen, like N, $N^+$, ${N_2}^+$, ${N_2}^*$ and $NH_x$-radical, in bulk plasma of each process. And the same time, during DC plasma nitriding and other processes, the species of FeN atom or any ionic nitride species were not detected by OES analyzing.

• Journal of Korea Foundry Society
• /
• v.23 no.1
• /
• pp.30-39
• /
• 2003

Porous hybrid preforms were fabricated by reactive sintering using the compacts consisting of SiC particles, Fe and Al powders. Squeeze casting processing was employed to produce the composite in which the matrix phase is Al-Si7Mg. The microstructural change and wear resistance of the composites were investigated in terms of an amount of SiC particles. The wear loss was increased with increasing the contact pressure in the alloy containing SiC particles coated with Cu. The most drastic change was found to the specimen tested at 2.5 MPa of contact pressure. Concerning the alloys containing SiC particles coated with Ni-P, a drastic increase in the wear loss exhibited at 2 MPa of contact pressure in those alloys containing 4 and 8 wt. % of SiC particles coated with Ni-P. In the alloy containing 16 wt. % a proportional increase in wear loss was observed to the change of contact pressure. With respecting to the sliding velocity, the wear loss of the alloy containing SiC particles coated with Cu increased at the initial stage of wear process and then decreased. Similar result was found in the alloys containing SiC particles coated with Ni-P. On the basis of the present results obtained, it was found that wear resistance of the alloys tested was improved to show in the order of the alloy reinforced by coated SiC particles > by uncoated SiC particles > by intermetallic compound without SiC particles.

• Journal of Korea Foundry Society
• /
• v.38 no.2
• /
• pp.32-40
• /
• 2018

Changes in the microstructures and mechanical properties of an AC2B alloy through solution heat treatment were investigated using recycled AC2B cutting chips as raw material. The as-cast microstructure of the AC2B alloy comprised ${\alpha}$-Al, $Al_2Cu$, and coarse needle-shaped phases considered to be eutectic Si and an Al-Fe-Si based intermetallic compound. After solution heat treatments at $505^{\circ}C$ for 1 h and 6 h, the samples showed complete dissolution of $Al_2Cu$ and relatively fine distribution of intermetallic compounds. Hardness test results showed that the hardness rapidly increased after the solution heat treatment for 1 h by solid solution hardening, and the increase of hardness exhibited a plateau from 1 h to 6 h. The results of the hardness and tensile tests showed that there was no visible difference in the effect of 1 h and 6 h solid solution treatment.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.2
• /
• pp.73-76
• /
• 2010

The copper indium disulfide ($CuInS_2$) thin film was manufactured using sputtering and thermal evaporation methods, and the annealing with sulfurization process was used in the vacuum chamber to the substrate temperature on the glass substrate, the annealing temperature and the composition ratio, and the characteristics thereof were investigated. The $CuInS_2$ thin film was manufactured by the sulfurization of a soda lime glass (SLG) Cu/In/S stacked [1] elemental layer deposited on a glass substrate by vacuum chamber annealing [2] with sulfurization for various times at a temperature of substrate temperature of $200^{\circ}C$. The structure and electrical properties of the film was measured in order to determine the optimum conditions for the growth of $CuInS_2$ ternary compound semiconductor $CuInS_2$ thin films with a non-stoichiometric composition. The physical properties of the thin film were investigated under various fabrication conditions [3,4], including the substrate temperature, annealing temperature and annealing time by X-ray diffraction (XRD), field Emission scanning electron microscope (FE-SEM), and Hall measurement systems. [5] The sputtering rate depending upon the DC/RF power was controlled so that the composition ratio of Cu versus In might be around 1:1, and the substrate temperature affecting the quality of the film was varied in the range of room temperature (RT) to $300^{\circ}C$ at intervals of $100^{\circ}C$, and the annealing temperature of the thin film was varied RT to $550^{\circ}C$ in intervals of $100^{\circ}C$.

• International Journal of Advanced Culture Technology
• /
• v.3 no.1
• /
• pp.153-160
• /
• 2015

This article is aimed to study the effects of resistance spot welding (RSW) on the lap joint properties between AA1100 aluminum alloy and SGACD zinc coated steel and its properties. The summarized experimental results are as follows. The summarized experimental results are as follows. The optimum welding parameters that produced maximum tensile shear strength of 2200 N was a welding current of 95 kA, a holding time of 10 cycles, and a welding pressure of 0.10 MPa. Increasing of welding current, increased the tensile shear strength of the joint and also increased the amount of aluminum dispersion at the joint interface. The lap joint of steel over the aluminum (Type I) showed the higher joint tensile shear strength than a lap joint of aluminum over the steel (Type II). The indentation depth and the ratio of the indentation depth to the plate thickness decreased when the welding current was increased in the type I lap joint and also decreased when the welding current was decreased in the type II lap joint. The interface structure showed the formation of the brittle $FeAl_3$ intermetallic compound that deteriorated the joint strength.

• YAKHAK HOEJI
• /
• v.40 no.1
• /
• pp.102-111
• /
• 1996

LB10522 is a new parenteral broad spectrum cephalosporin with a catechol moiety at C-7 position of beta-lactam ring. This compound can utilize tonB-dependent iron transp ort system in addition to porin proteins to enter bacterial periplasmic space and access to penicillin-binding proteins (PBPs) which are the lethal targets of ${\beta}$-lactam antibiotics. The chelating activity of LB10522 to metal iron was measured by spectrophotometrically scanning the absorbance from 200 to 900nm. When $FeCl_3$ was added, optical density was increased between 450 and 800nm. LB10522 was more active against gram-negative strains in iron-depleted media than in iron-replete media. This is due to the increased expression of iron transport channels in iron-depleted condition. LB10522 showed a similar activity against E. coli DC2 (permeability mutant) and E. coli DCO (wild type strain) in both iron-depleted and iron-replete media, indicating a minimal permeaility barrier for LB10522 uptake. LB10522 had high affinities to PBP 3 and PBP 1A, 1B of E. coli. By blocking these proteins, LB10522 caused inhibition of cell division and the eventual death of cells. This result was correlated well with the morphological changes in E. coli exposed to LB10522. Although the in vitro MIC of LB10522 against P. aeruginosa 1912E mutant (tonB) was 8-times higher than that of the P. aeruginosa 1912E parent strain, LB10522 showed a similar in vivo protection efficacy against both strains in the mouse systemic infection model. This result suggested that tonB mutant, which requires a high level of iron for normal growth, might have a difficulty in surviving in their host with an iron-limited environment.

• Korean journal of food and cookery science
• /
• v.33 no.1
• /
• pp.113-120
• /
• 2017

Purpose: Lipid autoxidation of a soybean oil-in-water emulsion with high oil content was studied under after basil extract and/or iron addition. Methods: The emulsion consisted of tocopherol-stripped soybean oil (40 g), citrate buffer (60 g, pH 4.0), and/or $FeSO_4$ (0.5 mg) with 75% ethanol extract (200 mg/kg) of basil (Ocimum basilicum). Lipid oxidation was evaluated using headspace oxygen content, hydroperoxide contents, and p-anisidne values of the emulsion. Polyphenol compound retention in the emulsion during oxidation was determined spectrophotometrically. Results: Addition of basil extract significantly (p<0.05) decreased reduced hydroperoxide contents of the emulsion, and iron significantly (p<0.05) increased anisidine values and decreased oxygen contents. Co-addition of basil extract and iron showed significantly (p<0.05) lower reduced hydroperoxide contents in the emulsion than compared to those of the emulsion with added iron and the control emulsion without basil extract nor or iron. During the emulsion oxidation, polyphenol compounds in the emulsion with added basil extract were degraded, but more slowlywhich was slowed degraded in the presence of iron. Conclusion: The iIron increased the lipid oxidation through hydroperoxide decomposition, and basil extract showed antioxidant activity through radical-scavenging and iron-chelation. Polyphenol degradation was decelerated by iron addition, which suggested suggests iron chelation may be more preferred topreferentially activated over radical scavenging in the antioxidant action by of basil extract in the oil-in-water emulsion with high oil content.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.8 no.3
• /
• pp.173-178
• /
• 2003

To improve the erythritol productivity of Penicillium sp. KJ81, mutants were obtained using UV irradiation and NTG treatment Among these mutants, Penicillium sp. KJ-UV29 revealed no morphological changes, yet was superior to the wild strain in the following three points: (1) Penicillium sp. KJ-UV29 produced more erythritol than the wild strain under the same conditions, (2) no foam was produced during cultivation, unlike the wild strain, and (3) the mutant produced a Significantly lower amount of glycerol. Penirillium sp. KJ-UV29 produced as much as 15.1 g/L of erythritol, whereas the wild-type Penirillium sp. KJ81 only produced 11.7 g/L. Penicillium sp. KJ-UV29 only generated 6.1 g/L of glycerol, compared to 19.4 g/L produced by the wild strain. When investigating the optimal culture conditions for erythritol production by the mutant strain Penicillium sp. KJ-UV89, sucrose was identified as the most effective carbon source, and the mutant was even able to produce erythritol in a 70% sucrose-containing medium, although a 30% sucrose medium exhibited the highest productivity. The production of erythritol by Penirillium sp. KJ-UV29 was also significantly increased by the addition of ammonium carbonate, potassium nitrate, and sodium nitrate. Accordingly, under optimal conditions, Penicillium sp. KJ-UV29 produced 45.2 g/L of erythritol in a medium containing 30% sucrose, 0.5% yeast extract, 0.5% (NH$_4$)$_2$C$_2$O$_4$, 0.1% KNO$_3$, 0.1% NaNO$_3$, and 0.01% FeSO$_4$ with 1 vvm aeration and 200 rpm agitation at 37$^{\circ}C$ for 7 days in a 5-L jar fermentor.

• Culinary science and hospitality research
• /
• v.17 no.1
• /
• pp.208-217
• /
• 2011

This study explores the antioxidant activity of solvent extracts from Vitis coignetiea skins, and the result is as follows. Total phenolic compound and flavonoids contents were the highest in ethyl acetate extract, $53.4{\pm}1.2\;mg$/100 g and $644.7{\pm}3.7\;mg$/100 g, respectively. Electron donating abilities of solvent extracts from Vitis coignetiea skin were proportionally increased with concentration and ethyl acetate extract ($80.93{\pm}0.58%$) showed the higher activity than BHT($63.21{\pm}0.72%$) at concentration of $50\;{\mu}l$/mL. Reducing power of solvent extracts from Vitis coignetiea skin was the highest in ethyl acetate extract(1.769) at concentration of $1,000\;{\mu}l$/mL. TBARS of ethyl acetate extract was higher than ascorbic acid. Nitrite scavenging ability of solvent extracts from Vitis coignetiea skin(pH 1.2, $1,000\;{\mu}l$/mL) was the highest in ethyl acetate extract($92.5{\pm}2.4%$).

• KIEAE Journal
• /
• v.10 no.5
• /
• pp.115-121
• /
• 2010

Lime was the solidifier mostly used at the fields of construction and civil works in the past. however, the development of Portland cement remarkably reduced the use of it. Recently as the concernment on circumstances gets higher, lime wined attention again as an eco-friendly material and was used at earth-using construction. This study examined the physical and chemical capacity of lime complexes with lime capacity improved, and performed fundamental study on the way to concretize by mixing it with earth. As a result, lime complex pressure strength was lower than cement pressure strength but it showed the possibility that its strength was improved by W/B control. The measurement of XRD after paste formation confirmed a compound generated by the reaction of Ca2+ion and Si, Al, and Fe from pozzolan reaction. A earth wall experiment by using lime complexes and earth showed that the higher, WB or the lower the quantity of unit combined materials, the lower the pressure strength was. The maximum pressure strength was maximum 11MPa when the quantity of unit combined materials was 450. It is because the composed earth particles had a high content of micro powder less than silt, so a lot of combination are demanded to secure fluidity. As a result of peptization experiment, after hardening, the material was not dissolved, which informed of the possibility of use as an outer subsidiary material. If the material is hardened by mold formation method, natural hardening crack appears. Cast expresses smart surface quality and enables to design for multiple purpose. The result shows the possibility of construction of low-story structures by using earth wall made of lime complexes and earth.