• 제목/요약/키워드: Fe and Mn Oxides

검색결과 121건 처리시간 0.025초

혼성 막여과 공정을 이용한 철/망간의 제거 및 막오염 평가 (Fe/Mn Removal and Membrane Fouling in Combined Chlorination/UF Systems for Drinking Water Treatment)

  • 추광호;이해범;최상준
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 2004년도 Workshop
    • /
    • pp.115-131
    • /
    • 2004
  • .Oxidized Mn and Fe retained by UF did not cause membrane fouling, but reduced it. .Periodic backwashing rather aggravated fouling due to the deposition of Mn oxides on the outside, which was associated with oxidation kinetics.

  • PDF

Gif-KRICT Biomimetic Oxidation of Cyclohexane: The Influence of Metal Oxides

  • 박애숙;남상성;김성보;이규완
    • Bulletin of the Korean Chemical Society
    • /
    • 제20권1호
    • /
    • pp.49-52
    • /
    • 1999
  • Various metal oxides such as Fe2O3, FeO, TiO2, MnO2, MoO3, WO3 and ZnO have been used as a catalyst for Gif-KRICT type cyclohexane oxidation. In this reaction, the conversion of cyclohexane to cyclohexanone and cyclohexanol and the selectivity ratio of cyclohexanone to cyclohexanol were greatly affected by the acidity of metal oxides. When metal oxide has more acidic property, the reactivity on oxidation is increased and the formation of cyclohexanone is more favored. From this result, we proposed a new mechanism for the biomimetic Gif-KRICT oxidation system.

Spinel 유화물 $Ni_xFe_{1-x}Cr_2S_4(X = 0.05, 0.1, 0.2)$의 초거대자기저항(CMR)현상에 관한 연구 (Colossal Magnetoresistance in Chalcogenide Spinels $Ni_xFe_{1-x}Cr_2S_4(X = 0.05, 0.1, 0.2)$)

  • 박재윤
    • 한국자기학회지
    • /
    • 제11권4호
    • /
    • pp.151-156
    • /
    • 2001
  • 최근 망간산화물 Ln$_{1-x}$A$_{x}$MnO$_3$(Ln=La, Pr, Nd등의 lanthannide; A=Ca, Sr, Ba, Pb 등의 +2가 이온)는 초거대자기저항(CMR) 특성으로 많은 연구그룹의 주목을 받고 있다. 그런데 chalcogenide spinels에서도 CMR특성이 관측되는 것으로 보고되고 있다. 본 논문에서는 chalcogenide Ni$_{x}$Fe$_{1-x}$Cr$_2$S$_4$에서 Ni이온이 CMR 특성에 미치는 효과를 X선 회절 실험, 자기저항측정, 그리고 Mossbauer 분광실험으로 조사하였다. 그 결과 Ni이온의 치환은 Jahn-Teller distortion을 심화시키고, 또한 T$_{c}$ 값에 증가를 초래하여 CMR현상에 영향을 준다. T$_{c}$ 부근에서 일어나는 CMR현상은 망간산화물에서의 $Mn^{3+}$$Mn^{4+}$ 사이의 이중교환상호작용과는 다르게 동적 Jahn-Teller효과에 기인한 도체-반도체전이와 자기장하에서 절반 금속성의 에너지밴드구조를 갖는 시료의 스핀편향에 의한 전도현상 그리고 자기구역의 정렬에 의하여 발생되는 것으로 나타났다.

  • PDF

1,2-Dichlorobenzene 및 질소산화물 동시제거를 위한 촉매연구 (A Study on Catalysts for Simultaneous Removal of 1,2-Dichlorobenzene and NOx)

  • 박광희;홍성창
    • 공업화학
    • /
    • 제20권5호
    • /
    • pp.522-526
    • /
    • 2009
  • 다양한 금속(Ru, Mn, Co, Fe)을 $Al_2O_3$$CeO_2$에 담지한 촉매를 이용하여 1,2-Dichlorobenzen (1,2-DCB) 제거를 위한 촉매산화 실험을 실시하였다. 이와 더불어 동시에 NOx 제거가 이루어져 단일 촉매층에서 산화/환원 이원 기능이 가능한 촉매를 연구하고자 하였다. 실험결과 1,2-DCB 산화제거효율은 Ru/Co/$Al_2O_3$, Mn-Fe/$CeO_{2}$, 상용촉매인 Cr/$Al_2O_3$ 순으로 나타났다. 또한 1,2-DCB 산화제거효율이 가장 우수하였던 Ru/Co/$Al_2O_3$는 Chlorobenzene (CB)의 분해실험에서도 VOC 제거에 있어서 잘 알려진 Pt-Pd/$Al_2O_3$ 보다 우수한 활성을 나타내었다. 또한 $Cl_2$와 같은 생성물에 의하여 활성의 저하 및 황에 대한 내피독성과 내구성에서 우수한 결과를 얻을 수 있었다. NOx 제거에 있어서도 $260^{\circ}C$에서 NOx 전환율이 70% 정도로 나타났다.

Development of Continuous Galvanization-compatible Martensitic Steel

  • Gong, Y.F.;Song, T.J.;Kim, Han S.;Kwak, J.H.;De Cooman, B.C.
    • Corrosion Science and Technology
    • /
    • 제11권1호
    • /
    • pp.1-8
    • /
    • 2012
  • The development of martensitic grades which can be processed in continuous galvanizing lines requires the reduction of the oxides formed on the steel during the hot dip process. This reduction mechanism was investigated in detail by means of High Resolution Transmission Electron Microscopy (HR-TEM) of cross-sectional samples. Annealing of a martensitic steel in a 10% $H_2+N_2$ atmosphere with the dew point of $-35^{\circ}C$ resulted in the formation of a thin $_{C-X}MnO.SiO_{2}$ (x>1) oxide film and amorphous $_{a-X}MnO.SiO_{2}$ oxide particles on the surface. During the hot dip galvanizing in Zn-0.13%Al, the thin $_{C-X}MnO.SiO_{2}$ (x>1) oxide film was reduced by the Al. The $_{a-X}MnO.SiO_{2}$ (x<0.9) and $a-SiO_{2}$ oxides however remained embedded in the Zn coating close to the steel/coating interface. No $Fe_{2}Al_{5-X}Zn_{X}$ inhibition layer formation was observed. During hot dip galvanizing in Zn-0.20%Al, the $_{C-X}MnO.SiO_{2}$ (x>1) oxide film was also reduced and the amorphous $_{a-X}MnO.SiO_{2}$ and $a-SiO_{2}$ particles were embedded in the $Fe_{2}Al_{5-X}Zn_{X}$ inhibition layer formed at the steel/coating interface during hot dipping. The results clearly show that Al in the liquid Zn bath can reduce the crystalline $_{C-X}MnO.SiO_{2}$ (x>1) oxides but not the amorphous $_{a-X}MnO.SiO_{2}$ (x<0.9) and $a-SiO_{2}$ oxides. These oxides remain embedded in the Zn layer or in the inhibition layer, making it possible to apply a Zn or Zn-alloy coating on martensitic steel by hot dipping. The hot dipping process was also found to deteriorate the mechanical properties, independently of the Zn bath composition.

페롭스카이트형 산화물에서 일산화탄소에 의한 질소산화물의 환원반응 (Catalytic Reduction of Nitric Oxide by Carbon Monoxide over Perovskite-Type Oxide)

  • 문행철;선창봉;이근대;안병현;임권택;홍성수
    • 공업화학
    • /
    • 제10권3호
    • /
    • pp.407-414
    • /
    • 1999
  • 능금산법으로 제조된 페롭스카이트형 산화물에서 CO에 의한 NO의 환원반응에 대한 연구를 행하였다. 촉매는 주로 Lanthanoid계 페롭스카이트를 사용하였고, 활성을 증가시키기 위해 A, B site에 Sr, Ba 및 Fe, Mn 등을 치환시켰다. $LaCoO_3$ 촉매에서 A site에 Sr을 일부 치환시키면 NO전환율이 증가하였다. 한편 B site에 Fe나 Mn을 일부 치환시키면 NO의 전환율이 증가하였으나 Fe의 치환량이 커지면 오히려 전환율이 감소하였다. 한편 $La_{0.6}Sr_{0.4}Co_{0.8}Fe_{0.2}O_3 $ 촉매에 $SnO_2$$MnO_2$를 혼합하면 촉매활성이 증가하는 상승효과를 보였다. 반응물에 첨가된 물은 촉매활성을 감소시켰으나 촉매에 대한 물의 작용은 어느 정도 가역적이었다. 또한 반응물에 첨가된 이산화황은 NO의 전환율을 감소시켰다.

  • PDF

철 및 망간 산화물로 코팅된 입자활성탄을 이용한 수용액 중 As(III) 및 As(V)의 제거 (Removal of As(III) and As(V) in Aqueous Phases by Fe and Mn Oxides Coated Granular Activated Carbon)

  • 이희용;양중석;최재영;이승목
    • 대한환경공학회지
    • /
    • 제31권8호
    • /
    • pp.619-626
    • /
    • 2009
  • 본 연구에서는 수용액상의 비소를 산화 및 흡착기작을 이용하여 제거하기 위해서 철과 망간 산화물로 코팅된 입자 활성탄 (FMOCG)을 제조하고, 이의 표면특성 및 회분식 실험을 통하여 비소제거 특성을 규명하였다. 회분식 실험에서는 네 가지 코팅매질의 비소 산화 및 흡착 동역학, pH 영향, 등온흡착실험을 실시하였다. 코팅매질의 철과 망간 함량은 FMOCG-1(178.12 Fe mg/g, 11.25 Mn mg/g)가 비교적 많은 것으로 나타났다. 비소흡착 동역학을 통하여 As(III)의 경우 산화 및 흡착을 통하여 제거됨을 확인하였다. pH 영향실험 결과 pH가 낮을수록 비소의 제거율이 높아지는 것으로 나타났다. 등온흡착실험 결과는 Langmuir isotherm에 잘 적용되었으며 As(III)보다 As(V)의 흡착량이 약간 높았으며, 최대 흡착량은 1.38~8.44 mg As(III)/g과 2.91~9.63 mg As(V)/g이었다.

Surface Oxidation of High Strength Automotive Steels during Continuous Annealing, and the Influence of Trace Elements of P,B, and Sb

  • Sohn, Il-Ryoung;Park, Joong-Chul;Kim, Jong-Sang
    • Corrosion Science and Technology
    • /
    • 제9권6호
    • /
    • pp.259-264
    • /
    • 2010
  • In continuous hot dip galvanizing process, oxide formation on steel surface has an influence on Zn wetting. High strength automotive steel contains high amount of Si and Mn, where Si-Mn composite oxides such as $Mn_2SiO_4$ or $MnSiO_3$ covers the surface after annealing. Zn wetting depends on how the aluminothermia reaction can reduce the Mn-Si composite oxides and then form inhibition layer such as $Fe_2Al_5$ on the steel surface. The outward diffusion of metallic ions such as $Mn^{2+}$, $Si^{2+}$ in the steel matrix is very important factor for the formation of the surface oxides on the steel surface. The surface state and grain boundaries provide an important role for the diffusion and the surface oxide reactions. Some elements such as P, Sb, and B have a strong affinity for the interface precipitation, and it influence the diffusivity of metallic ions on grain boundaries. B oxide forms very rapildly on the steel surface during the annealing, and this promote complex oxides with $SiO_2$ or MnO. P has inter-reacted with other elements on the grain boundaries and influence the diffusion through on them. Small addition of Sb could suppress the decarburization from steel surface and retards the formation of internal and external selective oxides on the steel surface. Interface control by the trace elements such as Sb could be available to improve the Zn wettability during the hot dip galvanizing.

Catalytic Combustion of Methane over Perovskite-Type Oxides

  • Hong, Seong-Soo;Sun, Chang-Bong;Lee, Gun-Dae;Ju, Chang-Sik;Lee, Min-Gyu
    • Environmental Sciences Bulletin of The Korean Environmental Sciences Society
    • /
    • 제4권2호
    • /
    • pp.95-102
    • /
    • 2000
  • Methane combustion over perovskite-type oxides prepared using the malic acid method was investigated. To enhance the catalytic activity, the perovskite oxides were modified by the substitution of metal into their A or B site. In addition, the reaction conditions, such as the temperature, space velocity, and partial pressure of the methane were varied to understand their effect on the catalytic performance. With the LaCoO3-type catalyst, the partial substitution of Sr or Ba into site A enhanced the catalytic activity in the methane combustion. With the LaBO3(B=Co, Fe, Mn, Cu)-type catalyst, the catalytic activities were exhibited in the order of Co>Fe Mn>Cu. Futhermore, the partial substitution of Co into site B enhanced the catalytic activity, whereas an excess amount of Co decreased the activity. The surface area and catalytic activity of the perovskite catalysts prepared using the malic acid method showed higher values than those prepared using the solid reaction method. The catalytic activity was enhanced with decreased methane concentration and with a decrease in the space velocity.

  • PDF

만경강 하천변 충적 지하수의 용존 Fe와 Mn 거동에 대한 산화-환원 과정과 용해 평형의 효과 (Effect of Redox Processes and Solubility Equilibria on the Behavior of Dissolved Iron and Manganese in Groundwater from a Riverine Alluvial Aquifer)

  • 최범규;고동찬;하규철;전수현
    • 자원환경지질
    • /
    • 제40권1호
    • /
    • pp.29-45
    • /
    • 2007
  • 전라북도 전주시 지역의 만경강 하천변 충적 대수층에 심도 30m까지 설치된 다중 심도 관정을 이용하여 산화-환원 환경과 관련된 지하수의 생물지구화학적 특성을 조사하였다. 대체로 용존 산소(DO)가 1 mg/L이하의 혐기성 환경이 지배적이었으며, 10-20m 구간에서는 높은 농도의 Fe($14{\sim}37mg/L$)와 Mn($1{\sim}4mg/L$)이 나타나고 그 하부에서는 S(-II) 이온이 검출되었다. 용존 Fe와 Mn이 높은 구간에서는 $O_2,\;NO_3$가 거의 없고, 퇴적물내의 Fe와 Mn의 함량은 심도에 따라 큰 차이 없이 분포하고 있어 전자수용체로서 이용된 Fe(III), Mn(IV)의 환원에 의해 지하수내의 용존 Fe와 Mn의 농도가 높아진 것으로 볼 수 있다. 용존 농도에서 Mn이 Fe에 비해 상대적으로 농도가 높게 나타나는 구간이 더 넓다. 환원 과정에서 전자공여체(electron donor)로 이용될 수 있는 유기 탄소(DOC) 농도가 지하수면 부근에서 급격히 감소하는 것으로 보아 지하수내 유기물은 상부에서 유입되는 것으로 보인다. 20m 하부에서는 $SO_4$가 감소하고 S(-II) 이온이 검출되는 것으로 보아 상부 구간보다는 하부구간에서 $SO_4$ 환원작용이 활발함을 지시한다. 여러 산화-환원쌍으로부터 계산된 산화-환원 전위는 Fe를 포함하는 쌍들간을 제외하고는 모두 일치하지 않아 전체적으로 산화-환원적으로 비평형 상태에 있다고 볼 수 있다. 지하수면 부근을 제외하고는 siderite, rhodochrosite 등의 탄산염 광물의 포화지수가 -2에서 +1의 범위를 보여 이들 광물에 의해 각각 Fe(II), Mn(II) 이온의 농도가 지하수내에서 조절될 수 있음을 보여주며, 20m 하부 심도 구간에서 S(-II) 이온이 검출되는 지점에서는 Fe(II)의 경우 FeS 광물에 의해서도 농도가 조절될 수 있다.