• 제목/요약/키워드: Fe addition

검색결과 1,981건 처리시간 0.033초

구상흑연주철 용탕 중 접종제의 접종능과 페이딩 거동 및 이들에 미치는 미량 원소의 영향 (Ability and Fading Behavior of Inoculants in Ductile Cast Iron Melt and Effect of Minor Elemets on them)

  • 권상빈;권해욱;남원식
    • 한국주조공학회지
    • /
    • 제25권2호
    • /
    • pp.102-108
    • /
    • 2005
  • The ability and fading behavior of inoculant in ductile cast iron melt and the effect of minor element on them were investigated. The result obtanied on nodularization and the performance of inoculant were more distinct when the melt was treated and held at the high temperature range of $1450{\sim}1500^{\circ}C$ than at the lower one of $1350{\sim}1400^{\circ}C$. The performance of 5.2%Mg-Fe-Si alloy was the best of 4 nodularizers. That of Fe-75%Si(I) alloy was better than other 4 inoculants. The performance of the Fe-75%Si(I) inoculant was deteoriated by the addition of sulfur or bismuth. On the other hand, that was improved by the addition of cerium, even though its extent was not big.

Effects of Transferrin on Enhancing Biological Availability of Iron

  • Park, In-wook;Kim, Yun-Ji;Seong, i-Seung
    • Preventive Nutrition and Food Science
    • /
    • 제3권3호
    • /
    • pp.248-250
    • /
    • 1998
  • In this study, transferrin which is an iron-carrying glycoprotein in plasma was evaluted for its iron binding capacities(TIBC), iron solubilizing abilities, and enhancing effect of biological availbability of iron. Results of TIBC showed that 1 mg of transferrin could blind 1.28$\mu\textrm{g}$ of iron indicating that one molecule of transferrin can bind about 2 molecules of iron. Also, solubility of iorn (7.5$\mu\textrm{g}$ Fe/ml) was significantly incresed to 96.0% with addition of transferrin (5mg/ml) .When FeCl3(80$\mu\textrm{g}$ Fe/ml) was injected to iron-deficient rats by intestinal segment in situ technique, 18.4% of injected iron was absorbed wherease 48.49 and 48.76% of injected iron was absorbed with addition of 10 and 20 mg transferrin/ml , respectively.

  • PDF

MAGNETITE AND MAGHEMITE THIN FILMS FOR MAGNETIC RECORDING

  • Chin, T.S.;Chang, W.D.
    • 한국자기학회지
    • /
    • 제5권5호
    • /
    • pp.623-626
    • /
    • 1995
  • High coercivity thin $Fe_{3}O_{4}$ and ${\gamma}-Fe_{2}O_{3}$ films were deposited on Si substrate under well controlled $O_{2}$ partial pressure by dcreactive magnetron sputtering. The coercivity of as-deposited maggnetite films is below 640 Oe. After cxidizing at $360^{\circ}C$ for 10 minutes, the films transform to maghemite ${\gamma}-Fe_{2}O_{3}$ completely, and the coercivity increases greatly to 2100~4120 Oe, depending on modification of not with minor addition of Co or/and Mn. The orign of coercivity enhancement is attributed mainly to magnetic anisotropy arisen from interfacial stress. The addition of 5 at% Co and 5 at% Mn greatly enhances coercivity and squareness ratio. These films are potential for ultra-high density recording applications.

  • PDF

정수처리 응집효율 개선을 위한 Al(III)염과 Fe(III)염 응집제의 비교 (Comparison of Al(III) and Fe(III) Coagulants for Improving Coagulation Effectiveness in Water Treatment)

  • 한승우;강임석
    • 대한환경공학회지
    • /
    • 제37권6호
    • /
    • pp.325-331
    • /
    • 2015
  • 낙동강 하류부의 상수원수를 대상으로 Al(III)염과 Fe(III)염계 응집제를 이용한 응집제의 특성 실험 결과, alum과 $FeCl_3$의 경우는 모노머성 화학종이 각각 98%와 93.3%로 응집제내에 함유된 주된 가수분해종은 모노머성 화학종임을 알 수 있었다. 염기를 첨가하여 제조한 염기 첨가비 r=1.2인 PACl의 경우 폴리머성 Al(III)종은 31.2%이었으며, r=2.2인 PACl의 경우 함유된 폴리머성 Al(III)종은 85.0%로 r 값이 증가함에 따라 더 많은 폴리머성 Al(III)종이 함유되어 있는 것으로 나타났다. 응집제별 응집실험 결과, 원수의 탁도가 높고 낮음에 관계없이 응집제별 탁도 및 유기물 제거정도는 $FeCl_3$ > PACl (r=2.2) > PACl(r=1.2) > alum의 순으로 나타났다. Al(III)계 응집제 보다 $FeCl_3$의 경우 응집효율이 우수한 것으로 나타났다. 그리고 Al(III)계 응집제의 경우 염기도가 높은 응집제의 경우 polymeric Al(III)종을 많이 함유함에 따라 응집효율이 향상됨에 따라 염기도가 높은 응집제일수록 응집효율이 높은 것으로 나타났다. 실험에 적용된 응집 pH 범위(pH 4.0~9.5)에서 모든 응집제의 최적 응집 pH는 약 7.0으로 나타났다. 특히 고염기도 PACl (r=2.2)과 $FeCl_3$의 경우 pH 7.0 이상에서도 높은 탁도 응집효율을 유지하였다. 따라서 pH가 높은 상수원수의 경우 탁도 제거에서는 고염기도 PACl이나 $FeCl_3$ 응집제가 더 적합한 것으로 판단된다.

${\alpha}-Fe$ 기 Nd-Fe-B 급속응고합금의 자기특성 (Magnetic Properties of ${\alpha}-Fe$ Based Nd-Fe-B Melt-Spun Alloys)

  • 조용수;김윤배;박우식;김희태;김창석;김택기
    • 한국자기학회지
    • /
    • 제4권2호
    • /
    • pp.122-125
    • /
    • 1994
  • Nd 함유량을 4 at.%로 고정시킨 Nd-Fe-B 합금의 자기특성이 조사되었다. 급속응고된 $Nd_{4}Fe_{85.5}B_{10.5}$ 합금은 열처리에 의하여 ${\alpha}-Fe$ 연자성기지에 석출되며, $Nd_{4}Fe_{85.5}B_{10.5}$ 합금에 Mo, Nb, V 및 Cu의 첨가는 결정립을 미세화시켜 보자력을 향상시킨다. 그러나 ${\alpha}-Fe$ 결정립에 의한 각형성 열화는 잔류자화를 감소시킨다. $Nd_{4}Fe_{82}B_{10}M_{3}Cu_{1}$(M = Mo, Nb, V) 합금에서 보자력은 M = V < Nb < Mo로 증가하며, M = Mo에서 2.7 kOe이고, 잔류자화는 M = Mo < Nb < V순으로 증가하며 M = V에서 1.35 T이다.

  • PDF

반응소결법에 의한 Fe-Al 금속간화합물 예비성형체의 제조시 코팅된 SiC입자 첨가에 따른 미세조직 및 제인자의 영향 (Effects of several factors and microstructures with coated SiC particle addition on the fabrication of Fe-Al intermetallic compounds preform by Reactive Sintering)

  • 차재상;임동진;박성혁;주성민;최답천
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 1997년도 추계학술강연 및 발표대회 강연 및 발표논문 초록집
    • /
    • pp.19-19
    • /
    • 1997
  • PDF