• Journal of Microbiology and Biotechnology
• /
• v.21 no.2
• /
• pp.192-196
• /
• 2011

Microbial induction of rusty-root was proved in this study. The enzymes hydrolyzing plant structural materials, including pectinase, pectolyase, ligninase, and cellulase, caused the rusty-root in ginseng. Pectinase and pectolyase produced the highest rusty-color formation. Ferrous ion ($Fe^{+++}$) caused the synergistic effect on rusty-root formation in ginseng when it was used with pectinase. The effect of ferric ion ($Fe^{++}$) on rusty-root formation was slow, compared with $Fe^{+++}$, probably due to gradual oxidation to $Fe^{+++}$. Other metal ions including the ferric ion ($Fe^{++}$) did not affect rusty-root formation. The endophytic bacteria Agrobacterium tumefaciens, Lysobacter gummosus, Pseudomonas veronii, Pseudomonas marginalis, Rhodococcus erythropolis, and Rhodococcus globerulus, and the rotten-root forming phytophathogenic fungus Cylindrocarpon destructans, caused rusty-root. The polyphenol formation (rusty color) was not significantly different between microorganisms. The rotten-root-forming C. destructans produced large quantities of external cellulase activity (${\approx}2.3$ U[${\mu}m$/min/mg protein]), which indicated the pathogenecity of the fungus, whereas the bacteria produced 0.1-0.7 U. The fungal external pectinase activities (0.05 U) and rusty-root formation activity were similar to those of the bacteria. In this report, we proved that microbial hydrolyzing enzymes caused rusty-root (Hue value $15^{\circ}$) of ginseng, and ferrous ion worsened the symptom.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.8
• /
• pp.1375-1382
• /
• 2007

A column preconcentration method with pulverized Amberlite XAD-4 loaded with bismuthiol I (BI) has been developed for the determination of trace Cd(II) and Cu(II) in various real samples by flame atomic absorption spectrophotometry. Various experimental conditions, such as the size of XAD-4, adsorption flow rate, amount of bismuthiol I, stirring time for adsorbing bismuthiol I on XAD-4, pH of sample solution, amount of XAD-4- BI, desorption solvent, and desorption flow rate, were optimized. Also, the adsorption capacity and the adsorption rate of Cd(II) and Cu(II) on XAD-4-BI were investigated. The interfering effects of various concomitant ions were investigated, Bi(III), Sn(II) and Fe(III) were found to affect the determination. But the interference by these ions was completely eliminated by adjusting the amount of XAD-4-BI resin to 0.70 g, although the adsorption flow rate was slower. For Cd(II) our proposed technique obtained a dynamic range of 0.5-40 ng mL-1, a correlation coefficient (R2) of 0.9913, and a detection limit of 0.3 ng mL-1. For Cu(II), the corresponding values were 2.0-120 ng mL-1, 0.9921 and 1.02 ng mL-1. To validate this proposed technique, the aqueous samples (stream water, reservoir water, tap water and wastewater), the diluted brass sample and the plastic sample, as real samples, were used. Recovery yields of 91-103% were obtained. These measured data were not different from ICP-MS data at 95% confidence level. Our proposed method was also validated using rice flour CRM (normal, fortified) samples. From the results of our experiment, we found that the technique we present here can be applied to the determination of Cd(II) and Cu(II) in various real samples.

• Analytical Science and Technology
• /
• v.17 no.3
• /
• pp.199-210
• /
• 2004

A new polystyrene-divinylbenzene chelating resin containing 4,5-dihydroxy-naphthalene-2,7-disulfonic acid (chromotropic acid : CTA) as functional group has been synthesized and characterized. The sorption and desorption properties of this chelating resin for Cr(III) ion and Cr(VI) ion including nine metal bloodstain. As a results, FOB test kit could be effectively applied to identification of human blood at chelating resin was stable in acidic and alkaline solution. The Cr(VI) ion is selectively separated from Cr (III) ion at pH 2 and the maximum sorption capacity of Cr(VI) ion is 1.2 mmol/g. In the presence of anions such as $F^-$, $SO{_4}^{2-}$, $CN^-$, $CH_3COO^-$, $NO{_3}^-$, the sorption of Cr(VI) ion was reduced but anions such as $PO{_4}^{3-}$ and $Cl^-$ revealed no interference effect. The elution order of metal ions obtained from breakthrough capacity and overall capacity at pH 2 was Cr(VI)>Sn(II)>Fe(III)>Cu(II)>Cd(II)${\simeq}Pb(II){\simeq}Cr(III){\simeq}Mn(II){\simeq}Ni(II){\simeq}Al(III)$. Desorption characteristics for Cr(VI) ion was investigated with desorption agents such as $HNO_3$, HCl, and $H_2SO_4$. It was found that the ion showed high desorption efficiency with 3 M HCl. As the result, the chelating resin, XAD-16-CTA was successfully applied to separation and preconcentration of Cr (VI) ion from several metal ions in metal finishing works.

• Journal of Korean Society on Water Environment
• /
• v.18 no.3
• /
• pp.271-282
• /
• 2002

The sonochemical process has been applied as a treatment method to investigate its effect on the decomposition of humic substances (HS). The reaction kinetics and mechanisms in the process of sonochemical treatment for humic substances in wastewater have also been discussed. It was observed that the metal ions such Fe(II) and Mn(II) showed catalytic effects, while Al(III), Ca(II), and Mg(II) had inhibitory effects on the decomposition of humic substances in sonochemical reaction with hydrogen peroxide. Experimental results also showed factors such as hydrogen peroxide dose affected the formation of disinfection by-products. Two trihalomethanes, chloroform and dichlorobromomethane were formed as major disinfection by-products during chlorination. The depolymerization and the radical reaction of HS radicals appear to occur simultaneously. The final step of the reaction is the conversion of organic acids to carbon dioxide.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.10 no.S_3
• /
• pp.127-137
• /
• 2001

The sonochemical Process has been applied as a treatment method and was investigated its effect on the decomposition of humic substances(HS). The reaction kinetics and mechanisms in the Process of sonochemical treatment for humic substances(HS) in wastewater have also been discussed. It was observed that the metal ions such as Fe(II) and Mn(II) showed catalytic effects, while Al(III), Ca(II), and Mg(II) had inhibitory effects on the decomposition of humic substances in sonochemical reaction with hydrogen peroxide. Experimental results also showed factors such as hydrogen peroxide dose affected the formation of disinfection by-products. Two trihalomethanes, chloroform and dichlorobromomethane were formed as major disinfection by-products during chlorination. The mechanism of radical reaction is controlled by an oxidation process. The radicals are so reactive that most of them are consumed by HS radicals and hydroxyl radicals can be acted on organic solutes by hydroxyl addition, hydrogen abstraction, and electron transfer. The depolymerization and the radical reaction of HS radicals appear to occur simultaneously. The final steps of the reaction are the conversion of organic acids to carbon dioxide.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.943-946
• /
• 2005

An effective spectrophotometric determination of palladium with 4-(2-pyridylazo)-resorcinol (PAR) using molten naphthalene as a diluent has been studied. A red complex of palladium with PAR is formed at 90 ${^{\circ}C}$. In the range of pH 9.0-11.0, the complex is quantitatively extracted into molten naphthalene. The organic phase is anhydrously dissolved in $CHCl_3$ to be determined spectrophotometrically at 520 nm against the reagent blank. Beer’s law is obeyed over the concentration range of 0.1-2 ${\mu}g{\cdot}mL^{-1}$. The molar absorptivity and Sandell’s sensitivity are 8.0 ${\times}\;10^5\;L{\cdot}mol^{-1}{\cdot}cm^{-}1\;and\;0.49\;{\mu}g{\cdot}cm^{-2}$ respectively. From the results of tolerance limits, it was found that there was no interferences were observed for most of the ions examined and those somewhat high interferences by Co(II), Fe(II) and Bi(III) could be effectively masked by EDTA.

• Analytical Science and Technology
• /
• v.6 no.1
• /
• pp.57-63
• /
• 1993

Spectrophotometric determination of cobalt by flow injection method is described. 2-(5-Bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropylamino) aniline rapidly forms a water-soluble complex with cobalt in $NH_3-NH_4Cl$ buffer solution at pH 10.5. The absorption maxima of this complex is at 545 nm with molar absorptivity of $58000L\;mol^{-1}\;cm^{-1}$. The calibration curve of cobalt is linear over the range of 0.1 to 0.6ppm and the detection limit is 25ppb. The relative standard deviation is ${\pm}0.72%$ for 0.5ppm and the sampling rate is $60samples\;hr^{-1}$. The interfering effect of some cations and anions was investigated. Ni(II), Cu(II), Fe(III) and $CN^-$ interfered severely. The interfering effect of these matallic ions could be decreased by adding $1.0{\times}10^{-3}M$ EDTA solution to the carrier stream.

• Korean Journal of Microbiology
• /
• v.41 no.1
• /
• pp.81-86
• /
• 2005

One of the endoglucanases, F-I-III, was purified from the culture filtrate of T. sp. C-4 through procedures including chromatography on Sephacryl S-200, DEAE-Sepharose A-50, and Chromatofocusing on Mono-P (FPLC). The molecular weight of the enzyme was determined to be about 56,000 Da by SDS-PAGE, and pI of 4.9 by analytical isoelectric focusing. F-I-III showed the highest enzyme activity at $55^{\circ}C$, and the pH optimum of the enzyme was 5.0. There was no loss of activity when the enzyme was incubated at $50^{\circ}C$ for 24 hours. The specific activity of the enzyme F-I-III toward the CMC was 315.4 U/mg. The Km value for $PNPG_2$ of F-I-III was 2.69 mM. N-terminal sequence of F-I-III was analyzed to be QPGTSTPEVHPKKLTTYK. It showed $95\%$ of homology to that of EGI from T. reesei. The presence of some metal ions (1 mM) had only a little effect on CMCase activity. The treatment of the reducing agents resulted in the increase of endoglucanase activity.

• Microbiology and Biotechnology Letters
• /
• v.32 no.3
• /
• pp.230-237
• /
• 2004

In this study nitroreductase from Pseudomonas sp. HK-6 capable of degrading 2,4,6-trinitrotoluene (TNT) was characterized. Through a series of purification process including ammonium sulfate precipitation, DEAE-sepharose, and Q-sepharose, three different fractions I, II, and III having the enzyme activity of NTRs whose molecular weights were approximately 27 kDa were detected in fractions from HK-6 cells. Specific activity of the three fractions were approximately 4.85 unit/mg, 5.47 unit/mg, and 5.01 unit/mg, and concentrated to 9.0-, 10.1-, and 9.3-fold compared to crude extract, respectively. The optimal pH and temperature for the three NTR fractions were approximately 7.5 and $30^{\circ}C$, respectively. Metal ions, $Ag^{＋}$ , $Cu^{ 2+}$, $Hg^{2＋}$ inhibited approximately 70% of enzymes activities of all NTR, while $Fe^{2＋}$ did not stimulate or inhibit the activities. Monitoring the effect of chemicals on the enzyme activity revealed that those NTR fractions lost enzyme activity in presence of $\beta$-mercaptoethanol, but were a little influenced by dithiothreitol, EDTA and NaCl. The three NTR fractions demonstrated enzyme activities for nitrobenzene and RDX as well as TNT.

• Membrane and Water Treatment
• /
• v.11 no.3
• /
• pp.207-215
• /
• 2020

Vivianite (Fe₃²⁺(PO₄)2·8H₂O) and green rust ([Fe₄²⁺Fe₂³⁺(OH)^-₁₂][SO₄^2-·2H₂O]^2-), ferrous containing minerals, could remove aqueous U(VI) in 5 min. and the efficiencies of green rust were roughly 2 times higher than that of vivianite. The zeta potential measurement results implies that the better performance of green rust might be attributed to the favorable surface charge toward uranyl phosphate species. The removal behaviors of the minerals were well fitted by pseudo-second order kinetic model (R² > 0.990) indicating the dominant removal process was chemical adsorption. Effects of Ca²⁺ and CO₃^2- at pH 7 were examined in terms of removal kinetic and capacity. The kinetic constants of aqueous U(VI) were 8 and 13 times lower (0.492 × 10^-3 g/(mg·min); 0.305 × 10^-3 g/(mg·min)) compared to the value in the absence of the ions. The thermodynamic equilibrium calculation showed that the stable uranyl species (uranyl tri-carbonate) were newly formed at the condition. Surface investigation on the reacted mineral with uranyl phosphates species were carried out by XPS. Ferrous iron and U(VI) on the green rust surface were completely oxidized and reduced into Fe(III) and U(IV) after 7 d. It suggests that the ferrous minerals can retard U(VI) migration in phosphate-rich groundwater through the adsorption and subsequent reduction processes.