• 제목/요약/키워드: Fe (III)

검색결과 566건 처리시간 0.021초

Biochemical Characterization of the Dual Positional Specific Maize Lipoxygenase and the Dependence of Lagging and Initial Burst Phenomenon on pH, Substrate, and Detergent during Pre-steady State Kinetics

  • Cho, Kyoung-Won;Jang, Sung-Kuk;Huon, Thavrak;Park, Sang-Wook;Han, Ok-Soo
    • BMB Reports
    • /
    • 제40권1호
    • /
    • pp.100-106
    • /
    • 2007
  • The wound-inducible lipoxygenase obtained from maize is one of the nontraditional lipoxygenases that possess dual positional specificity. In this paper, we provide our results on the determination and comparison of the kinetic constants of the maize lipoxygenase, with or without detergents in the steady state, and characterization of the dependence of the kinetic lag phase or initial burst, on pH, substrate, and detergent in the pre-steady state of the lipoxygenase reaction. The oxidation of linoleic acid showed a typical lag phase in the pre-steady state of the lipoxygenase reaction at pH 7.5 in the presence of 0.25% Tween-20 detergent. The reciprocal correlation between the induction period and the enzyme level indicated that this lag phenomenon was attributable to the slow oxidative activation of Fe (II) to Fe (III) at the active site of the enzyme as observed in other lipoxygenase reactions. Contrary to the lagging phenomenon observed at pH 7.5 in the presence of Tween-20, a unique initial burst was observed at pH 6.2 in the absence of detergents. To our knowledge, the initial burst in the oxidation of linoleic acid at pH 6.2 is the first observation in the lipoxygenase reaction. Kinetic constants (Km and kcat values) were largely dependent on the presence of detergent. An inverse correlation of the initial burst period with enzyme levels and interpretations on kinetic constants suggested that the observed initial burst in the oxidation of linoleic acid could be due to the availability of free fatty acids as substrates for binding with the lipoxygenase enzyme.

에칭 폐액으로부터 용매추출과 가수분해를 이용한 니켈분말제조에 관한 연구 (Recovery of Nickel from Waste Iron-Nickel Alloy Etchant and Fabrication of Nickel Powder)

  • 이석환;채병만;이상우;이승환
    • 청정기술
    • /
    • 제25권1호
    • /
    • pp.14-18
    • /
    • 2019
  • 여러 금속 부품을 가공하기 위하여 사용된 염화제이철 에칭 폐액은 유가금속인 니켈 등을 함유하고 있다. 본 연구에서는 식각공정을 완료한 에칭폐액을 재생하고 부산물로 나온 니켈 함유 폐액으로부터 정제하여 니켈 금속분말로 제조하는 공정을 개발하였다. 부산물인 니켈함유용액을 철 등의 불순물을 침전 제거하기 위하여 수산화나트륨 수용액을 실험을 통하여 가수분해 중화제로서 선정하였고, 이를 통하여 철 등의 불순물을 pH = 4 조건하에 침전 제거하였다. 그 후, 불순물로 잔류하는 망간 및 아연과 같은 금속이온들을 D2EHPA (Di-(2-ethylhexyl) phosphoric acid)를 사용하여 용매추출 하였다. 정제된 염화니켈은 99% 이상의 순도를 가지고 있으며, 그 후 환원제로 하이드라진을 이용하여 99% 이상의 순도와 약 150 nm의 크기를 가지는 니켈 금속분말로 제조하였다. 염화니켈 및 니켈 금속분말의 성분은 EDTA 적정법과 유도결합 플라즈마 방출분광법(inductively coupled plasma optical emission spectrometer, ICP-OES)을 이용하여 확인하였으며, 전계방사 주사전자현미경(field emission scanning electron microscope, FE-SEM), X-선 회절분석기(X-ray diffraction, XRD) 및 투과전자현미경(transmission electron microscopy, TEM)을 통하여 금속분말의 형태, 입자 크기 및 결정성과 같은 물리적 특성을 확인하였다.

목질계 바이오매스 연소부산물 분석과 모르타르 혼입 평가 (Investigative Analysis of By-products from Lignocellulosic Biomass Combustion and Their Impact on Mortar Properties)

  • 정영동;김민수;박원준
    • 한국건축시공학회지
    • /
    • 제23권6호
    • /
    • pp.663-671
    • /
    • 2023
  • 본 연구에서는 목질계 바이오매스(Bio-SRF, 우드펠릿)를 연료로 사용하는 발전소 3곳에서 배출된 4종의 목질계 플라이애시(FA)의 재활용성을 실험적으로 검토하였다. FA의 물리 분석(입형, 입도분포, 분말도, 밀도)과 화학 분석(화학조성, 중금속 함량)을 수행하였고, KS L 5405에 준하여 혼입률 5~20%의 모르타르 시험체를 제작하고 플로우와 압축강도를 측정하였다. 4종의 FA는 입경 약 20~30㎛, 밀도 약 2.3~2.5g/cm3, 분말도 2,600~4,900cm2/g, SiO2, Al2O3, Fe2O3, CaO 성분이 약 50~90%를 차지하고 있으며, 염소와 SiO2 함량을 배제하고 KS L 5405의 FA 2, 3형과 유사한 특성을 보였다. 모르타르 혼입 평가 결과, 펠릿 연소 FA는 5~20% 혼입 범위에서 모르타르 압축강도는 34~47MPa로 측정되었다. 목질계 연료 100%를 연소한 FA는 혼화재 대체재로서 재활용성이 높다고 평가된다.

뉴잉글랜드 펠암돔 주변부 데본기 변성 이질암의 변성 온도-압력 경로 (Metamorphic P-T Paths from Devonian Pelitic Schists from the Pelham Dome, Massachusetts, USA)

  • 김형수
    • 암석학회지
    • /
    • 제9권4호
    • /
    • pp.211-237
    • /
    • 2000
  • 북중부 Massachusetts 주에 위치하는 펠암돔의 북동부 연변부에서 산출되는 십자석대와 남정석대에서 채취한 시료내의 주구성 광물과 석류석 반상변정에 대해 주성분 분석과 화학적 누대구조를 분석하였다. 석류석 반상변정들은 결정 내의 내부 엽리 형태의 변화와 누대구조를 통해 이들은 다변형/변성 팍용을 거쳐서 성장했음을 지시한다. $X_{Mn}$ 의 역전 누대구조와 경사의 변화, Fe/(Fe+Mg) 비의증감 그리고 계단상의 $X_{Ca}$ 을 보이는 석류석의 비정상적인 누대구조들은 석류석 반상변정 내의 내부엽리 구조의 변화와 일치하는 경향성을 보인다. 이 내부 엽리의 형태와 광물의 산출상태, 그리고 사장석, 흑운모, 십자석 그리고 백운모의 화학성분은 석류석의 누대구조가 다음들의 조합에 의해 변화되었음을 지시한다. (i) 석류석의 소모 (석류석+녹니석+백운모 = 십자석+흑운모+석영+$H_2$O)와 생성 (십자석+백운모+석영=석류석+흑운모$+Al_2$$SiO_{5}$ $+H_2$O)와 포함하는 일변수와 이변수 반응들. (ii) 엽리 발동안 이온성 용해작용, 선택적인 확산작용과 원소의 재분포를 유포하는 변형작용. (iii) 석류석 성장 동안에 온도-압력의 변화. 암석학적 관찰과 석류석의 내부엽리 구조의 변화와 결합된 연구지역의 온도-압력 경로는 두가지로 구분된다: (1) NW-SE 압축운동 동안의 온도/압력 증가; (2) NNW-SSE 압축운동 동안의 온도/압력 감소. 기존의 펠암돔과 Bronson Hill 지역에서 모나자이트, 티타나이트, 각섬석, 흑운모, 백운모 그리고 K-장석들의 온도-시간적 (thermochronological) 자료와 후기 고생대 구조 모델에 근거해서, 아발론 암층과 표층암 경계를 따라 집중된 비균질 전단운동의 결과로 형성된 알레게니안 변성작용은 펠암돔 중부 Shutesbury 지역에서 펜실베니아기 동안(290-300Ma) 남정석-십자석-백운모 광물조합을 형성시켰다.

  • PDF

삼봉동광산산(三峰銅鑛山産) 유화광물(硫化鑛物)의 반사도(反射度)와 미경도(微硬度) 특성(特性) (Reflectance and Microhardness Characteristics of Sulfide Minerals from the Sambong Copper Mine)

  • 지세정
    • 자원환경지질
    • /
    • 제17권2호
    • /
    • pp.115-139
    • /
    • 1984
  • 본 논문에서는 경남일대 동 광화대에 위치하는 삼봉광산의 함 동-연-아연-은 열수 석영맥을 대상으로 황화 광석광물의 광물학적 특성을 규명하였다. 백악기 경상 퇴적 분지의 상부 지층인 칼크-알카리 화산암류 내에 발달된 $N-S{\sim}N13^{\circ}W/65{\sim}85^{\circ}W$의 제 단층 열극면 및 압쇄대를 따라 수 개조의 평행한 함 동-연-아연-은 열수 석영맥이 0.5-1.5Km 연장 부존되어 있다. 주 광석광물은 황동석, 방연석, 섬아연석, 황철석 등이며 맥석광물은 석영, 방해석, 견운모, 녹리석 등이다. 이들 광물로 구성된 함 동-연-아연-은 석영맥 내에 있어서 부광대의 발달은 구조 규제를 받고 있으며, 수평 및 수직적 방향에 있어서 조성광물의 대상분포 현상을 보여준다. 열수광화작용은 시기적으로 3회에 걸쳐 진행되었다. 광화 제 1시기(Stage I)는 미량의 황철석과 황동광이 수반하며 제 2시기에는 황동광, 방연광, 섬아연석과 극미량의 제유화 광물을 수반하는 개발대상의 석영맥(Stage IIa and IIb)이 형성되었고, 제 3시기에는 이들 석영맥의 약석대를 따라 최후의 방해석맥 (carbonate stage)이 형성되었다. 주조성 광물과 부성분 광물(황동석, 방연석, 섬아연석, 황철석, 유비철석, 백철석, 에나자이트)을 대상으로 물리적 특성을 실험하고, 광물의 형성단계, 부성분, 결정면의 방향과의 상관성을 밝히며 금속광물의 감정을 위한 제 자료를 제시하고자 반사도와 미경도를 실험 연구하였다 광화시기에 따른 반사력의 특성은 광화작용중 열수계의 물리 화학적 환경의 변화에 따른 광물의 성분 및 구조적 차이에 기인되는 것으로 고려된다. 섬아연석의 반사력과 굴절률은 Zn을 치환하는 철 함량에 정비례하며, //(100) 결정면에서 //(111) 결정면 보다 높은 값을 보여준다. 정성, 정량적인 부성분에 의한 내부반사(백색광하)를 +니콜하에서만 보여주는 경우 섬아연석은 정상 반사력의 값을 가지나, //니콜하에서도 내부반사를 보이는 것은 매우 상이한 spectral dispersion을 나타내는데, 내부 반사광과 같은 파장($544m{\mu}$, $593m{\mu}$, $615m{\mu}$)에서 선택반사 효과는 최대가 된다. 불투명 이방성 광석광물인 황동석은 2축성(-)이다. 표준 하중별로 실시한 빅카의 미경도 실험에서, 섬아연석은 100g 하중하에서 철함량이 8.05%에까지 증가함에 따라 미경도 값이 급격히 증가하나 철 성분이 더 많으면 다시 감소하는 경향을 보여준다. 섬아연석은 //(100) 결정면에서 //(111) 결정면보다 미경도 값이 크며, 방연석 //(111), //(210), //(100)의 순으로 결정방향에 따라 미경도 값이 작아진다. 경도가 작은 유화광물 일수록 indentation의 대각선 길이의 변화폭이 크며, 실험 광물에서는 황철석 섬아연광 황동광 방연광 순으로 증가된다. 한편 모든 실험 광물은 결정방향에 따라 각각 특징적인 indentation의 형태와 단구를 갖는데, 이는 광물감정과 결정면의 방향을 규명하는데 좋은 자료가 된다.

  • PDF

장군광산(將軍鑛山)의 연(鉛)·아연(亞鉛)·은(銀) 및 철(鐵) 광상(鑛床)의 성인(成因)과 지질구조(地質構造)와의 관계(關係) - 광상(鑛床) 생성(生成)의 지질구조(地質構造) 규제(規制)와 모암(母岩)의 변질(變質) - (Genesis of the Lead-Zinc-Silver and Iron Deposits of the Janggun Mine, as Related to Their Structural Features Structural Control and Wall Rock Alteration of Ore-Formation)

  • 이현구;고석주;나오야 이마이
    • 자원환경지질
    • /
    • 제23권2호
    • /
    • pp.161-181
    • /
    • 1990
  • The lead-zinc-silver-iron deposits from the Janggun mine are of hydrothermal-metasomatic origin, characterized by the marked hydrothermal alteration of the wallrocks, such as hydrothermal manganese enrichment of carbonate rocks, silicification, chloritization, sericitization, montmorillonitization and argillic alteration. The ore deposits have been emplaced within the Janggun Limestone of Cambro-Ordovician age at the immediate contacts with apophyses injected from the Chunyang Granite plutons of Late Jurrasic age. They have been structurally controlled by fractures in the carbonate rocks and the irregular intrusive contacts of granitic rocks, and are closely associated with hypogene manganese carbonate deposits. In the mine nine seperate orebodies are being mined. On the basis of the petrological study, hydrothermal alteration zone of this mine may be divided into the following four zones from wallrock to orebody. (I) Primary calcite and dolomite zone${\rightarrow}$(II) dolomitic limestone zone${\rightarrow}$(III) dolomitic zone${\rightarrow}$(IV) rhodochrosite zone${\rightarrow}$ orebody. There was not recongnized Mn and Fe elements in the primary calcite and dolomite zone. But, in the dolomitic limestone and dolomite zone, calcite and dolomite were subjected to weak hydrothermal manganese enrichment and the grade of the manganese enrichment increase oreward. By means of electron probe microanalysis, it was found that manganoan dolomite occured between primary dolomite grains, cross the cleavage of the primary dolomite and around the dolomite grains. Above these result supports that the Janggun manganese carbonate deposits are of hydrothermal metasomatic origin.

  • PDF

전기방사법에 의한 NiZn 페라이트 나노섬유의 제조 및 특성 연구 (Preparation and Characterization of NiZn-Ferrite Nanofibers Fabricated by Electrospinning Process)

  • 주용휘;남중희;조정호;전명표;김병익;고태경
    • 한국세라믹학회지
    • /
    • 제46권1호
    • /
    • pp.74-80
    • /
    • 2009
  • Electrospinning process is the useful and unique method to produce nanofibers from metal precursor and polymer solution by controlled viscosity. In this study, the NiZn ferrite nanofibers were prepared by electrospinning with a aqueous metal salts/polymer solution that contained polyvinyl pyrrolidone and Fe (III) chloride, Ni (II) acetate tetrahydrate and zinc acetate dihydrate in N,N-dimethylformamide. The applied electric field and spurting rate for spinning conditions were 10 kV, 2 ml/h, respectively. The obtained fibers were treated at $250^{\circ}C$ for 1 h to remove the polymer. Finally, the NiZn ferrite fibers were calcined at $600^{\circ}C$ for 3 h and annealed at $900{\sim}1200^{\circ}C$ in air. By tuning the viscosity of batch solution before electrospinning, we were able to control the microstructure of NiZn ferrite fiber in the range of $150{\sim}500\;nm$ at 770 cP. The primary particle size in $600^{\circ}C$ calcined ferrite fiber was about 10 nm. The properties of those NiZn ferrite fibers were determined from X-ray diffraction analysis, electron microscopy, energy dispersive spectroscopy, Fourier transform infrared spectroscopy, thermal analysis, and magnetic measurement.

Urinary Arsenic Concentrations and their Associated Factors in Korean Adults

  • Bae, Hye-Sun;Ryu, Doug-Young;Choi, Byung-Sun;Park, Jung-Duck
    • Toxicological Research
    • /
    • 제29권2호
    • /
    • pp.137-142
    • /
    • 2013
  • Arsenic (As) is a well-known human carcinogen and its dietary exposure has been found to be the major route of entry into general population. This study was performed to assess the body levels of As and their associated factors in Korean adults by analyzing total As in urine. Urine and blood samples were collected from 580 adults aged 20 years and older, who had not been exposed to As occupationally. Demographic information was collected with the help of a standard questionnaire, including age, smoking, alcohol intake, job profiles, and diet consumed in the last 24 hrs of the study. Total As, sum of As(III), As(V), monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), in urine was determined using atomic absorption spectrometer involving hydride generation method. The geometric mean concentration of total As in urine was $7.10{\mu}g/L$. Urine As was significantly higher in men ($7.63{\mu}g/L$) than in women ($6.75{\mu}g/L$). Age, smoking, alcohol consumption, and job profiles of study subjects did not significantly affect the concentration of As in urine. No significant relationship was observed between body mass index (BMI), Fe, and total cholesterol in serum and urinary As. Urine As level was positively correlated with seaweeds, fishes & shellfishes, and grain intake. A negative correlation between urinary As level and HDL-cholesterol in serum and meat intake was observed. Overall, these results suggest that urinary As concentration could be affected by seafood consumption. Therefore, people who frequently consume seafood and grain need to be monitored for chronic dietary As exposure.

과학적 분석방법을 이용한 무령왕릉 목관재의 옻칠 기법 연구 (Lacquer Manufacturing Method for the Wooden Coffins of King Muryeong's Tomb based on the Scientific Analysis)

  • 김수철;이광희;강형태;신성필;한민수
    • 보존과학회지
    • /
    • 제26권3호
    • /
    • pp.247-258
    • /
    • 2010
  • 무령왕릉 출토 목관재 6점의 칠도막 편에 대하여 광학 현미경 관찰, 적외선 분광분석 및 SEM-EDS 분석을 실시하였다. 목관재에 도장된 옻칠 기법은 크게 네 가지 방법으로 분류되었다. 목재 표면에 그을음(미립자의 흑색 안료)을 혼합한 흑색 안료층이 밑층으로 존재하면서 그 위로 칠이 1회(그룹 II) 도장된 것과 3회(그룹 I) 도장된 것, 흑색 안료층이 존재하지 않으면서 칠 도장이 1회(그룹 IV)와 2회(그룹 III) 되어있는 것으로 분류되었다. 이는 목관의 제작기법과 부재의 결구 방법을 밝히는데 좋은 정보가 될 것으로 생각된다. 적외선 분광분석을 통해 무령왕릉 칠도막은 자외선에 의한 열화 요인이 적은 것으로 나타났다. 이는 이동이 어려운 목관의 크기와 무덤이라는 매장 환경 등에 기인한 결과로 보인다. 또한 SEM-EDS 분석결과 현재까지 고대 칠분석에서 보고된 바 없는 Ca, Fe, Cu의 성분이 확인되어 의미가 있다.

농경지 및 공장지역 토양 내 중금속 존재형태와 토양 특성과의 상관성 평가 (Correlation Estimation between Geochemical Metal-fraction and Soil Properties in Agricultural and Industrial Soils)

  • 이홍길;김지인;노회정;박정의;김태승;윤정기
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제21권6호
    • /
    • pp.169-178
    • /
    • 2016
  • The Standards, Measurement and Testing Programme (SM&T-formerly BCR) extraction procedure was applied to fractionate Cr, Cu, Ni, Pb and Zn in 23 top soil samples into: (i) exchangeable phase; (ii) reducible phase; (iii) oxidisable(sulfides and organics bound) phase; and (iv) residual phase. Fractions of Cr and Ni were in the order of residual > oxidisable > reducible > exchangeable phase. The oxidisable phase was identified as dominant for Cu and Pb. Zn had the highest ratio of exchangeable phase in comparision to the other metals. The bioavailability and mobility were assessed to be the greatest for Zn, followed by a decreasing order of Pb, Cu, Ni and Cr. All metal average concentrations in topsoil samples was higher in industrial sites than in agricultural sites. Our results revealed higher concentrations in topsoil samples (0~15 cm) than in sub soils (15~30 cm, 30~60 cm) for most metals at six sites (No. 5, 6, 17, 19, 20, 23). The fractions of exchangeable, reducible ad oxidisable phases showed relatively high correlation with soil pH, Fe/Mn oxide concentrations and organic matter contents, respectively.