• KSTLE International Journal
• /
• v.4 no.2
• /
• pp.37-42
• /
• 2003

One of the obstacles for a magnetic bearing to be used in the wide range of industrial applications is the failure modes associated with magnetic bearings, which we don't expect for conventional passive bearings. These failure modes include electric power outage, power amplifier faults, position sensor faults, and the malfunction of controllers. Fault-tolerant magnetic bearing systems have been proposed so that the system can operate in spite of some faults in the system. In this paper, we designed a fault-tolerant magnetic bearing system for a turbo-molecular vacuum pump. The system can cope with the actuator/amplifier faults which are the most common faults in a magnetic bearing system. We implemented the existing fault-tolerant algorithms to experimentally prove the adequacy of the algorithms for industrial applications. As it turns out, the system can operate even with three simultaneously failing poles out of eight actuator poles.

• Journal of Power System Engineering
• /
• v.8 no.1
• /
• pp.62-68
• /
• 2004

This paper describes a fault tolerant control in distributed PLC(Programmable Logic Controller) system to ensure reliability of controllers which have some faults simultaneously. First, the behavior of PLC is modeled as discrete expressions using Galois field. Then, we design the control laws for additional spare controllers to generate parity code with two dimensions. Finally, the algorithm for estimating normal output instead of abnormal output from the controllers with fault is suggested. Comparing to the traditional duplication method, the suggested method can reduce the number of spare controllers significantly to ensure control reliability. This method will be applied to an automatic system in order to increase reliability. Also, it can improve cost performance of the system.

• ETRI Journal
• /
• v.33 no.1
• /
• pp.50-59
• /
• 2011

In the current very deep submicron technology era, fault tolerant mechanisms perform an essential function to cope with the effects of soft errors. To evaluate the effectiveness of the fault tolerant mechanism, reliability engineers use simulated fault injections using either saboteur modules or mutants in the simulation model. However, the two methods suffer from both inefficiency in the simulation mechanism and difficulties with the experimental setups. To overcome these inefficiencies, we propose the Verilog-based simulated fault injection (VFI) technique. VFI has the following advantages. First, modification of the design model is unnecessary. Second, the fault injection simulation procedure is simple and efficient. Third, various types of fault injection experiments can be performed. To evaluate the effectiveness of the proposed methodology, we developed a VFI environment using the ICARUS Verilog Simulator. From the experimental results, we were able to qualitatively evaluate the reliability of the target simulation models and to assess the effectiveness of the employed fault-tolerance mechanisms.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.6
• /
• pp.241-251
• /
• 2002

The effect of sensor faults in direct torque control(DTC) based induction motor drives is analyzed and a new Instrument fault detection isolation scheme(IFDIS) is proposed. The proposed IFDIS, which operated in real-time, detects and isolates the incipient fault(s) of speed sensor and current sensors that provide the feedback information. The scheme consists of an adaptive gain scheduling observer as a residual generator and a special sequential test logic unit. The observer provides not only the estimate of stator flux, a key variable in DTC system, but also the estimates of stator current and rotor speed that are useful for fault detection. With the test logic, the IFDIS has the functionality of fault isolation that only multiple estimator based IFDIS schemes can have. Simulation results for various type of sensor faults show the detection and isolation performance of the IFDIS and the applicability of this scheme to fault tolerant control system design.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.9
• /
• pp.822-826
• /
• 2013

In this paper, we propose an AFDO (Adaptive Fault Diagnosis Observer) and a fault tolerant controller for a class of nonlinear continuous-time system under the nonlinear abrupt actuator faults. Together with its estimation laws, the AFDO which estimates that the actuator faults is designed by using the Lyapunov analysis. Then, based on the designed AFDO, an adaptive sliding mode controller is proposed as the fault tolerant controller. Using Lyapunov stability analysis, we also prove the uniform boundedness of the state, the output and the fault estimation errors, and the asymptotic stability of the tracking error under the nonlinear time-varying faults. Finally, we illustrate the effectiveness of the proposed diagnosis method and the control scheme thorough computer simulations.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.12
• /
• pp.3662-3674
• /
• 1999

This paper addresses some design issues for establishing the optimal number of spare units in array systems manufactured using fault-tolerant multichip modules(MCM's) for massively parallel computing(MPC). We propose a new quantitative approach to an optimal cost-effective MCM system design under yield and reliability constraints. In the proposed approach, we analyze the effect of residual redundancy on operational reliability of fault-tolerant MCM's. In particular, the issues of imperfect support circuitry, chip assembly yield and array topology are investigated. Extensive parametric results for the analysis are provided to show that our scheme can be applied to design ways using MCM's for MPC applications more efficiently, subject to yield and reliability constraints.

• IE interfaces
• /
• v.23 no.1
• /
• pp.68-77
• /
• 2010

Digital reactor protection system which consists of many identical modules, is fault- tolerant to provide high safety. The modules themselves including DSP(digital signal processing) card are also fault-tolerant in nature. This paper assesses the safety for being-designed digital reactor protection system of 2-out-of-4 G structure with lockout. Some interesting design alternatives are compared. Fault tree analysis for assessing system safety is performed by Relex software. The selected reactor protection system fully satisfies EPRIURD stipulation of mean failure time of 50 years.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.12
• /
• pp.54-60
• /
• 2005

In this paper, fault tolerant control for aircraft is being discussed. The authors propose a fault tolerant control algorithm based on time delay control. Time delay control is an effective method to deal with unknown dynamics. The proposed algorithm has no parameter to be updated and needs no prior information of faults. These are the primary advantages of the proposed method. The algorithm uses output feedback. The design and the stability condition are presented by following the existing proof. The proposed algorithms are verified by simulation examples.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1B
• /
• pp.22-30
• /
• 2007

In this paper, to achieve consistency maintenance as well as stable service execution, we build a Fault-Tolerant Object Group framework that provides both of the group management service and the load scheduling service. The group management service supports the object management such as registration and authentication, and provides two schemes for failure recovery using the service priority and the checkpointing. In the load scheduling servile, we improve the effectiveness of service execution through the reasoning process of object loads based on the ANFIS architecture. The effectiveness in the performance of the developed framework is validated through a virtual home-network simulation based on the FTOG framework.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.756-760
• /
• 2005

By development of a robot technology, personal robot is being developed very actively. Various infra-technologies are accumulated in hardware and software how by internal a lot of research and development efforts, and it is circumstance that actual commodity is announced. But, personal robot is applied to be acting near human, and takes charge of safety and connected directly a lot of works of home security, gas-leakage, fire-warning facilities, or/and etc. So personal robot must do safe and stable action even if any unexpected accidents are happened, important functions are always operated. In this paper, we are wished to show design structures for supporting fault-tolerant operation from our real-time robot middleware viewpoint. Personal robot, in being developed, was designed by module structure to do to interconnect and to interoperate among each module that is mutually implemented by each research facilities or company. Also, each modules can use appreciate network system that is fit for handling and communicating its data. To guarantee this, we have being developed a real-time network middleware, for especially personal robot. Recent our working is to add and to adjust some functions like connection management, distributed routing mechanism, remote object management, and making platform independent robot application execution environment with self-moving of robot application, for fault-tolerant personal robot.