• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.510-519
• /
• 2020

Within an intelligent automated cyber-physical system, the realization of the autonomous mechanism for data collection, data integration, and data analysis plays a critical role in the design, development, operation, and maintenance of such a system. This construct is particularly vital for fault-tolerant route-finding systems that rely on the imprecise GPS location of the vehicles to properly operate, timely plan, and continuously produce informative feedback to the user. More essentially, the integration of digital twins with cyber-physical route-finding systems has been overlooked in intelligent transportation services with the capacity to construct the network routes solely from the locations of the operating vehicles. To address this limitation, the present study proposes a conceptual architecture that employs digital twin to autonomously maintain, update, and manage intelligent transportation systems. This virtual management simulation can improve the accuracy of time-of-arrival prediction based on auto-generated routes on which the vehicle's real-time location is mapped. To that end, first, an intelligent transportation system was developed based on two primary mechanisms: 1) an automated route finding process in which predictive data-driven models (i.e., regularized least-squares regression) can elicit the geometry and direction of the routes of the transportation network from the cloud of geotagged data points of the operating vehicles and 2) an intelligent mapping process capable of accurately locating the vehicles on the map whereby their arrival times to any point on the route can be estimated. Afterward, the digital representations of the physical entities (i.e., vehicles and routes) were simulated based on the auto-generated routes and the vehicles' locations in near-real-time. Finally, the feasibility and usability of the presented conceptual framework were evaluated through the comparison between the primary characteristics of the physical entities with their digital representations. The proposed architecture can be used by the vehicle-tracking applications dependent on geotagged data for digital mapping and location tracking of vehicles under a systematic comparison and simulation cyber-physical system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.279-286
• /
• 2012

Recently, design of Universal Soft Controller(USC) has been applied to the advanced control room for nuclear power plant. USC is software-based manual control means to control safety components as well as non-safety components in the highly-integrated control room. Therefore, design feature of USC is essential for the implementation of a single workstation in the advanced control room. The traditional control room is replaced by computer-driven consolidated operator interfaces. Considering our design has further reduced the probability of USC spurious signals by requiring two distinct operator control actions to generate any control signal. The reality of USC does not increase the probability of reactor trip because the probability of spurious USC signal is negligible. Universal Soft Control represents a significant evolution in nuclear I&C/HSI System. USC integrates the indicators and controls from multiple divisions into a single integrated visual display unit(VDU) based HSI(Human System Interface). In order to prevent adverse influence on safety function performance from USC failure, ESFAS signals are applied to safety components or functions. In addition, safety manual switches have priority over USC's signals. Therefore, spurious USC signals can be momentarily blocked by selecting a soft control command from the safety VDU.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.7
• /
• pp.520-533
• /
• 2007

The CRM(Customer Relationship Management) is the business strategy model for higher profits and competitive power of the enterprise in a new business environment. The large-scale customer response service technique uses internet, e-mail, SMS (Short Message Service), Telephony service, DM(Direct Mail) by customer channel point. Recently, business model diversify for new contract and retaining existing customer to the effort for a profitable model of business. This paper is based on Avaya PDS(Predictive Dialing System) model for CRM bond center. If the number of "available" agents are less than the number of inbound channels, then there may be real-time response problems in PDS system implemented. The Organization cannot afford to have many agents in available mode because of the high cost of manpower. This paper provides two contributions to the study. First, we present Call Object Management Mechanism of Customer Channel integration for reduce outbound consulting and reduce CallBack data in the PDS. Second, we design and implement the proposed system. Our simulation results show analysis of old model and proposed model. The proposed model can be efficiently used in Large-scale CRM.

• Journal of Advanced Navigation Technology
• /
• v.20 no.4
• /
• pp.321-328
• /
• 2016

Typical MLC NAND flash devices are considered less reliable than SLC NAND flash devices. Although raw bit error rate (RBER) of MLC flash had been considered approximately 1000times or more higher than that of SLC flash, recent research conducted on Google's data center shows that it is much lower than such expectation. Based on the research, we devised In Drive Data Duplication (IDDD) scheme that efficiently exploit MLC flash's sufficient capacity to improve its data reliability without structural complexity increment using SSD intrinsic firmware layer, and showed the data reliability expectation of MLC flash could be significantly higher than that of SLC flash from measured and calculated error rates. Even though RBER of SLC flash was lower than that of MLC flash in 44 out of 48 cases we studied, applying IDDD scheme, RBER of MLC flash was became lower than that of SLC in all 48 cases and uncorrectable bit error rate (UBER) of MLC flash was became lower than that of SLC flash in 45 out of 48 cases.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10b
• /
• pp.228-232
• /
• 2006

Ontology를 이용한 분산 시각미디어 검색 프레임워크인 HERMES(The Retrieval Framework for Visual Media Service)[1][2]는 보다 정확한 시각미디어 정보를 제공하고 웹서비스(Web Services)를 적용하여 HERMES/Provider[1][2]의 자율성을 보장한다. 웹기반의 분산 환경에서 Visual Media Data에 대한 지능적인 검색을 위하여 Meta Data와 Ontology를 이용하고 이기종간 통신을 위한 웹서비스를 제공하는 HERMES/ Broker[1][2]에서 예상치 못한 문제가 발생할 경우 문제를 해결할 수 있는 방법이 제시되지 않았다. 일반적으로 웹 서비스를 제공하는 서버에서 발생되는 결함은 해당 웹 서비스를 이용하여 개발되는 어플리케이션의 갑작스런 중단이나 오류의 원인이 된다. 따라서 결함을 해결할 수 있는 대책이 필요하며 HERMES의 Broker 서버 또한 웹 서비스의 결함이 발생하더라고 이를 효과적으로 해결하여 클라이언트에게 웹 서비스를 정상적으로 제공할 수 있는 결함허용 시스템 도입이 매우 중요하다. 때문에 HERMES 프레임워크가 클라이언트에게 신뢰성과 안정성이 보장된 웹 서비스의 제공을 위해서 Broker 서버에서 발생할 수 있는 결함을 효과적으로 극복할 수 있는 메커니즘이 필요하다. 본 논문에서는 Broker 서버 에서 웹 서비스와 관련된 결함이 발생하더라고 올바르게 운영될 수 있으며 분산 이미지 검색 프레임워크인 HERMES의 구조적 특성에 적합한 결함허용 시스템 설계 기법을 제안하여 HERMES 프레임워크가 클라이언트에게 투명성 있는 서비스를 제공하고 높은 신뢰성과 안정성이 확보될 수 있도록 구성하고자 한다. Query 수행을 여러 서버로 분산처리하게 함으로써 성능에 대한 신뢰성을 향상 시킬 수 있는 Load Balancing System을 제안한다.할 때 가장 효과적인 라우팅 프로토콜이라고 할 수 있다.iRNA 상의 의존관계를 분석할 수 있었다.수안보 등 지역에서 나타난다 이러한 이상대 주변에는 대개 온천이 발달되어 있었거나 새로 개발되어 있는 곳이다. 온천에 이용하고 있는 시추공의 자료는 배제하였으나 온천이응으로 직접적으로 영향을 받지 않은 시추공의 자료는 사용하였다 이러한 온천 주변 지역이라 하더라도 실제는 온천의 pumping 으로 인한 대류현상으로 주변 일대의 온도를 올려놓았기 때문에 비교적 높은 지열류량 값을 보인다. 한편 한반도 남동부 일대는 이번 추가된 자료에 의해 새로운 지열류량 분포 변화가 나타났다 강원 북부 오색온천지역 부근에서 높은 지열류량 분포를 보이며 또한 우리나라 대단층 중의 하나인 양산단층과 같은 방향으로 발달한 밀양단층, 모량단층, 동래단층 등 주변부로 NNE-SSW 방향의 지열류량 이상대가 발달한다. 이것으로 볼 때 지열류량은 지질구조와 무관하지 않음을 파악할 수 있다. 특히 이러한 단층대 주변은 지열수의 순환이 깊은 심도까지 가능하므로 이러한 대류현상으로 지표부근까지 높은 지온 전달이 되어 나타나는 것으로 판단된다.의 안정된 방사성표지효율을 보였다. $^{99m}Tc$-transferrin을 이용한 감염영상을 성공적으로 얻을 수 있었으며, $^{67}Ga$-citrate 영상과 비교하여 더 빠른 시간 안에 우수한 영상을 얻을 수 있었다. 그러므로 $^{99m}Tc$-transierrin이 감염 병소의 영상진단에 사용될 수

• Journal of Internet Computing and Services
• /
• v.3 no.1
• /
• pp.81-90
• /
• 2002

Large-scale distributed applications based on Internet and client/server applications have to deal with series of problems. Load balancing, unpredictable communication delays, and networking failures can be the example of the series of problems. Therefore. sophisticated applications such as teleconferencing, video-on-demand, and concurrent software engineering require an abstracted group communication, CORBA does not address these paradigms adequately. It mainly deals with point-to-point communication and does not support the development of reliable applications that include predictable behavior in distributed systems. In this paper, we present our design, implementation and performance analysis of the group communication using the CORBA-ORB. JAVA-RML and Socket based on distributed computing Performance analysis will be estimated latency-lime according to object increment, in case of group communication using ORB of CORBA the average is 14.5172msec, in case of group communication using RMI of Java the average is 21.4085msec, in case of group communication using socket the average is becoming 18.0714msec. Each group communication using multicast and UDP can be estimated 0.2735msec and 0.2157msec. The performance of the CORBA-ORB group communication is increased because of the increased object by the result of this research. This study can be applied to the fault-tolerant client/server system, group-ware. text retrieval system, and financial information systems.