• 전기학회논문지
• /
• 제66권10호
• /
• pp.1460-1465
• /
• 2017

Outage areas can be transferred to adjacent feeders to restore power supply in case of the fault on the distribution system. Feeders in the small island or mountain area may not have backup feeders due to the low density of load. In this weakly meshed open loop system, BESS can be used as a backup feeder to improve reliability of power supply. This paper proposes a new network reconfiguration method for BESS based service restoration. Fuzzy decision making technique is adopted to deal with fuzziness of service restoration planning rules. Case studies using KEPCO real distribution system have been performed to verify feasibility of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.163-165
• /
• 2003

In order to improve the power restoration capability of system operators In case that the fault and blackout happen in the power system, Development of the Power Restoration Training System is necessarily required as a simulator tool for training operator. Owing to these reasons, KEPRI has developed the power restoration training system and graphic editor and applied it to Jeju transmission system. This paper presents the design and implementation of the system, and shows a example to simulate the primary restorative line in jeju.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.936-938
• /
• 1997

Up to date, operator assistance systems -fault diagnosis system, fault restoration system etc.- are developed for power system automation. In this condition, an efficiency test of assistance system must be performed to prove application in real power system. This paper presents an SCADA simulator for an efficiency test of the operator assistance system, which is developed in the SCADA system. The proposed simulator is implemented under Win95 with Pentium-PC.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.487-488
• /
• 2007

Fault section detection and service restoration is very important in ungrounded distribution system. Techniques currently used to track down faults are time consuming and cumbersome. A new scheme is developed based on communication technology, and the simulation result shows that the method can satisfy the requirement proposed.

• 대한전자공학회논문지TC
• /
• 제47권11호
• /
• pp.49-58
• /
• 2010

본 논문은 메쉬 형태 MPLS 망에서 링크 장애가 동시에 여러 개 발생할 경우에 QoS를 보장하면서 빠르게 세그먼트를 복구하는 방법론을 제시한다. 방법론의 주요 특징은 빠른 세그먼트 복구를 위해 망 resilience와 QoS 요구조건이 함께 고려되었다는 점이다. 메쉬 형태 MPLS 망에 대해 망 resilience를 보장하는 대체 세그먼트의 존재유무를 테스트하기 위한 충분조건을 유도하고, 망 resilience와 QoS 요구조건을 충족시킬 수 있는 대체 세그먼트 생성 알고리즘을 제안한다. 마지막으로, 제안된 세그먼트 복구 알고리즘의 효율성을 시뮬레이션을 통해 보인다.

• 대한전자공학회논문지TC
• /
• 제40권10호
• /
• pp.67-78
• /
• 2003

인터넷 트래픽의 폭발적인 증가로 인한 높은 대역폭의 요구와 광 네트워크 기술이 발전되면서 DWDM 네트워크가 국가적 혹은 범세계적인 차세대 광 인터넷(NGOI) 백본망의 대안으로 인식되고 있다. 이러한 DWDM 네트워크 기반의 NGOI에서는 RWA(Routing and Wavelength Assignment) 문제와 생존성이 중요한 이슈가 되고 있다. 특히 높은 데이터 전송율을 가지는 DWDM 네트워크에서 일어나는 짧은 서비스 파괴는 막대한 트래픽 손실을 야기하므로, AOTN에서의 fault/attack 검출, 지역화, 그리고 회복시킴은 가장 중요한 이슈 중 하나가 된다. 본 논문에서는 다양한 광 백본망 소자들의 fault/attack 취약성 분석을 통한 fault/attack 관리 모델을 제안하고, IP/GMPLS over DWDM 내의 제어프로토콜인 Extended-LMP (Link Management Protocol)와 RSVP-TE+(Resource Reservation Protocol-Traffic Engineering)를 이용하여 fault/attack 회복 절차를 제시한다.

• 한국통신학회논문지
• /
• 제25권5B호
• /
• pp.850-858
• /
• 2000

최근 통신망의 규모가 커지고 대역폭이 증가됨에 따라서 통신망에 요구되는 신뢰도가 증가하게 되었다. 통신망에 있어서 대체 경로의 지정은 통신망의 장애 발생으로부터 통신망을 보호하는데 필수적이다. 본 논문에서는 다양한 서비스들이 가지는 상이한 트래픽 파라메터와 QoS(Quality of Service)를 제공하고 통신망의 관리를 용이하게 하기 위해서 동일한 물리매체 위에 ATM 베어러 서비스 유형(CBR, rt-VBR, nrt-VBR, ABR, UBR)에 따라 논리적으로 구분된 통신망을 구성한다. 또한 사용중인 노드 또는 링크에 장애가 발생했을 때, 보다 바른 자동복구를 위해서 대체경로를 이용한 자동북구 방법을 사용하고, TINA 기반의 장애관리 기능을 사용하여 초고속 통신망에 적합한 자동복구 방법을 제안한다.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권12호
• /
• pp.575-583
• /
• 2001

Dynamic Voltage Restorer(DVR) which is installed between the supply and a critical load can restore voltage disturbances in distribution system. The restoration is based on injecting the same voltages as voltage sags. The ideal restoration is compensation to make the load voltages be unchanged. But voltage restoration involves real power or energy injection and the capability of energy storage is limited. So it must be considered how injection energy can be minimized and voltages can be made close to the voltages before fault. This paper describes conventional restoration techniques, which draw minimum energy from the DVR in order to correct a given voltage sag or swell. And this paper proposes a new concept of restoration technique to inject minimum energy. The proposed method is based on the definition of voltage tolerance in load side. Hence using the proposed method a particular disturbance can be corrected with less amount of storage energy compared to those of conventional methods.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권9호
• /
• pp.513-520
• /
• 2003

Service restoration is an emergency control in distribution constrol centers to restore out-of-service area as soon as possible when a fault occurs in distribution networks. therefore, it requires fast computation time and high quality solutions for load balancing. In this paper. a load balance index and heuristic guided best-first search are proposed for these problem. The proposed algorithm consists of two parts. One is to set up a decision tree to represent the various switching operations available. Another is to identify the most effective the set of switches using proposed search technique and a load balance index. Test results on the KEPCO's 108 bus distribution system show that the performance is efficient and robust.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.416-417
• /
• 2019

In this paper, an effective power flow control strategy (PFCS) based on the centralized control approach and a DC-link (DCV) restoration algorithm for DC microgrid (DCMG) are presented. By investigating the statuses of system power units, eleven operating modes are given to ensure the system power balance under various conditions. To avoid the system power imbalance caused by the delay of grid fault detection, a reliable DCV restoration algorithm is proposed. In the proposed scheme, when an abnormal variation of the DCV is detected, the battery instantly starts a local emergency control mode to restore the DCV to the nominal value regardless of the control mode from the central controller. The simulations and experiments are carried out to prove the effectiveness of the PFCS and the proposed DCV restoration algorithm.