• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.3
• /
• pp.328-333
• /
• 1983

Due to fast industrialization and reduced agricultural population, there has been increased farm mechanization to reduce the labor requirement. In rice production, mechanical transplanting has been increasingly popular due to the heavy labor requirement in hand transplanting and development of convenient transplanters. For mechanical transplanting, rice seedlings is grown in boxes with limited soils under super dense population, thus short period of exposure to unfavorable temperature and poor water management would cause severe damage to rice seedlings such as seedling damping off and the similar physiological disorders. Several chemicals were evaluated for their effectiveness to control the disease and disorders, and other effects as plant growth stimulants. 3-hydroxy-5-methylisoxazole-a soil fungicide, Metalozyl-a fungicide which controls mildew, SF 8002-the composite of above two chemicals, and Isoprothiolane-a fungicide which controls rice blast were found to be effective controling seedling damping off and similar physiological disorders, and improvement of physiological characteristics of the seedlings such as the amount of bleeding sap, rooting ability, negative geotrophism, and regrowth after cutting. The results indicated that the chemicals will be very effective raising healthy seedlings even under unfavorable environments by the improvement of physiological activities of seedlings and preventing seedling damping off and the similar physiological disorders.

• Journal of Families and Better Life
• /
• v.1 no.2
• /
• pp.89-106
• /
• 1983

After accepting the modernized western culture, we, the Koreans, had traditionally patriarchal valuation on the family life, which has been changed into modernize on in these days. Under these circumstances, we examined into family consciousness of workmen, office workers and student of universities in Pusan with questioning papers by inquiring their general views of family, marriage, family planning , and inheritance. The results obtained can be summarized as follows. 1. General views of family 1)Most of them prefer nuclear family to gross one in structure of family. In decision of family's affairs, the lower educated persons want an unilateral relationship, which means unconditional obdience to their parent's opinion. they are more concerned about the profit of the family than that of individual. on the other hand, they want 2-generations nuclear family system. 2) Concerning children's future affairs, they want compromising method. 2. Views of Marriage 1) Date with the other sex motivated their desire to improve social adaptation and social association. 17-19 year old students regard date as a preparatory stage of marriage. They consider it most desirable date to enjoy free conversation each other. They hope their date partners are high educated. 2) The conditions of mate selection are in order character, health, vitality in living, appearance and education. The less educated placed an emphasis on vitality in living. 3) They are not much interested in marital harmony. If parents are against their marriage an account of bad marital harmony, they will take into consideration about it. 4) They wish to keep purity before marriage, as possible. They want engagement period of 6 months. Any agreeable reasons shall compel them to break off their appointment. 5) they consider it ideal for mate's age to be 26-30 years old, and also think it affirmative to follow their parent's agreement in marriage. It is considerable that they put off their marriage only because they have lots of work to do before marriage. 6)Marriage declaration is to be made on the wedding day. It still exists that they don't want to marry when they are inth same surname and family tree. But it is clear that they don't regard it as the reason of breaking off the betrothal. 3. Family Planning 1) They are willing to agree to the campaign "just two is enough". They want a son and a daughter. Even though they have two daughters, they won's bear child to get son. 2) the lower educated persons are ignorant of the method of birth control. 4. Inheritance 1)Most of them say householder inheritance is to be kept up continuously. It is reasonable that anyone who can afford to perform religious service should bear it responsibility. 2)They don't want the difference in inheritance as the conscious to the conscious of the equality of the sexes spread widely into our society, but it is worthy of notice that some of them still don't mind unequal treatment. 3) When they have no child, the property inheritances are in order his wife and his parents. According to above mentions, we conclude like this: Their consciousness of marital harmony, marriage, family planning and inheritance shows definitely passive rationism in the transitional stage which is mixed with western individualism and traditional feudalism. On account of being lack of steady fast self-conscience, they can not make their positive reaction on anything. Finally, we should make every possible efforts to have our firm self-conscience through the re-education.

• The KIPS Transactions:PartC
• /
• v.16C no.2
• /
• pp.165-182
• /
• 2009

Mobile IPv6 spends considerable bandwidth considering that its signal volume is proportional to the mobile and also it should be strengthened to support the binding signal volume, the traffic, and effective mobility. So, the study in NEMO(Network Mobility), an extended version of Mobile IPv6, has been conducted. NEMO provides its mobility by putting several mobiles and more than one portable router into one unit called as mobile network. Because nodes access Internet via the portable router at this time, it receives transparency without any additional work and that much reduces binding signal while solving binding storm. By supporting mobility, NEMO is able to have various mobile structures which realize several networks hierarchically and it is necessary to improve its safety and security by authenticating among the upper networks or the lower ones while moving. Also, it is extremely required to begin a study in the device to improve efficiency accompanied with mobility, which is executed by the fast hand-off as well as the safe authentication. For those reasons, this paper not only classifies various NEMO mobile scenarios into 7 ways, but also provides AAA authentication of each scenario, the authentication through the safety authentication and fast handoff authentication using F+HMIPv6 and the way to reduce both signaling volume and packet delays efficiently during the handoff.

• Journal of Distribution Science
• /
• v.14 no.11
• /
• pp.83-90
• /
• 2016

Purpose - During the last two years, convenient stores (CS) are emerging as one of the most fast-growing retail trades in Korea. The goal of this work is to forecast and to analyze sales at CS using ARIMA-Intervention model (IM) and exponential smoothing method (ESM), together with sales at supermarkets in South Korea. Considering that two retail trades above are homogeneous and comparable in size and purchasing items on off-line distribution channel, individual behavior and characteristic can be detected and also relative superiority of future growth can be forecasted. In particular, the rapid growth of sales at CS is regarded as an everlasting external event, or step intervention, so that IM with season variation can be examined. At the same time, Winters ESM can be investigated as an alternative to seasonal ARIMA-IM, on the assumption that the underlying series shows exponentially decreasing weights over time. In case of sales at supermarkets, the marked intervention could not be found over the underlying periods, so that only Winters ESM is considered. Research Design, Data, and Methodology - The dataset of this research is obtained from Korean Statistical Information Service (1/2010~7/2016) and Survey of Service Trend of Korea Statistics Administration. This work is exploited time series analyses such as IM, ESM and model-fitting statistics by using TSPLOT, TSMODEL, EXSMOOTH, ARIMA and MODELFIT procedures in SPSS 23.0. Results - By applying seasonal ARIMA-Intervention model to sales at CS, the steep and persisting increase can be expected over the next one year. On the other hand, we expect the rate of sales growth of supermarkets to be lagging and tied up constantly in the next 2016 year. Conclusions - Based on 2017 one-year sales forecasts for CS and supermarkets, we can yield the useful information for the development of CS and also for all retail trades. Future study is needed to analyze sales of popular items individually such as tobacco, banana milk, soju and so on and to get segmented results. Furthermore, we can expand sales forecasts to other retail trades such as department stores, hypermarkets, non-store retailing, so that comprehensive diagnostics can be delivered in the future.

• The KIPS Transactions:PartB
• /
• v.11B no.3
• /
• pp.337-344
• /
• 2004

Most of the virtual space constructed sufficiently realistic need a lot of memory space to navigate smoothly. And this kind of virtual space also requires real-time responsibility for the navigation as well as realism. In the off-line virtual system, real-time responsibility can be resolved by using large scale if secondary memory. In the web-based online virtual system, on the other hand, real-time responsibility is highly related to the latency time of network data communication. This induces the necessity of the algorithm for fast data loading. In this paper, we propose and verify the validity of the two methodology for cell leading algorithm. According to the results of computer simulation, the algorithm using hexagonal type cell promotes the real-time responsibility over 30％ than that of the rectangular type.

• Journal of Advanced Navigation Technology
• /
• v.10 no.4
• /
• pp.394-399
• /
• 2006

In this paper, we investigated performance for 5.8GHz dedicated short range communication system using OFDM which will be applied to Intelligent transportation system services. The maximum speed of a vehicle in DSRC channel is very fast as 180km/h, so a service time is very short to serve a various traffic information if hand-off is not occurred. Therefore higher bit rate is required to proved advanced and intelligent service to the drivers of various vehicle and the data transmission rate of the next generation DSRC system if being promoted over 10Mbps. The signals received in Clarke & Gans channel have been simulated using the computer simulator.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.215-225
• /
• 2006

Today's requirements for print-press runnability and print quality demand an optimised absorption and adhesion of printing ink on the paper surface. Modern coating concepts for high glossing offset grades use ultra fine pigments, whereas binder level has continuously been decreased to a minimum in recent years to achieve the highest possible sheet gloss development and for economical reasons. Both the ultra fine pigments and the reduced binder levels lead in many cases to a faster ink setting rate. On the other hand, matt paper grades use relatively coarse pigments leading to a slow ink setting compared to the high glossing papers. Both too fast and too slow ink setting properties implicate drawbacks in print quality and print press runnability. The mechanisms behind the interactions between ink and coating have been presented in many previous publications. The purpose of this study was to determine and quantify how the ink setting rate is influenced by pigment system (GCC and GCC/clay blends), latex level and latex properties in the topcoat of double coated sheet fed offset paper. The roles of binder level and type in the precoat were also assessed. The effect of calendering (temperature and pressure) was studied with one formulation. The resulting ink setting characteristics were tested using three different laboratory testing instruments. The correlation amongst the different laboratory testing methods is discussed. The results show that by varying the latex properties, the pigment system and/or latex addition level, the ink tack development of ink applied to a topcoat pigment system can be significantly influenced. It can be slowed down as often desired with ultra fine pigments or speeded up in the case of coarse pigments. There was no visible effect on the ink setting rate by using different binder systems in the precoat..

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.103-105
• /
• 2008

In grid-interconnection system, a fast, robust and precise phase angle detector is most important to grid synchronization and the active power control. The phase angle can be easily estimated by synchronous dq PLL system. On the other hand under unbalanced voltage condition, synchronous dq PLL system has problem that harmonics occur to phase angle or magnitude of grid voltage because of the effect of the negative sequence components. So, To eliminate the negative sequence components, the PLL method using APF (All Pass Filter) in a stationery reference frame to extract positive sequence components under unbalanced voltage condition is researched. In this paper, we propose a new PLL method with decoupling network using APF in a synchronous reference frame to extract the positive sequence components of the grid voltage under unbalanced grid. The cut-off frequency of APF in a synchronous reference frame can be set to twice of the fundamental frequency comparing with that of APF in a stationery reference frame which is the fundamental frequency. The proposed PLL strategy can detect the phase angle quickly and accurately under unbalanced gird voltages. Simulation and experimental results are presented to verify the proposed strategy under different kind of voltage dips.

• Investigative Magnetic Resonance Imaging
• /
• v.3 no.2
• /
• pp.154-158
• /
• 1999

Purpose : The purpose of this study was to find the optimum TE value for enhancing $T_2^{*}$ weighting effect and minimizing the SNR degradation and to compare the BOLD effects according to the changes of TE in 1.5T and 3.0T MRI systems. Materials and Methods : Healthy normal volunteers (eight males and two females with 24-38 years old) participated in this study. Each volunteer was asked to perform a simple finger-tapping task (sequential opposition of thumb to each of the other four fingers) with right hand with a mean frequency of about 2Hz. The stimulus was initially off for 3 images and was then alternatively switched on and off for 2 cycles of 6 images. Images were acquired on the 1.5T and 3.0T MRI with the FLASH (fast low angle shot) pulse sequence (TR : 100ms, FA : $20^{\circ}$, FOV : 230mm) that was used with 26, 36, 46, 56, 66, 76ms of TE times in 1.5T and 16, 26, 36, 46, 56, 66ms of TE in 3.0T MRI system. After the completion of scan, MR images were transferred into a PC and processed with a home-made analysis program based on the correlation coefficient method with the threshold value of 0.45. To search for the optimum TE value in fMRI, the difference between the activation and the rest by the susceptibility change for each TE was used in 1.5T and 3.0T respectively. In addition, the functional $T_2^{*}$ map was calculated to quantify susceptibility change. Results : The calculated optimum TE for fMRI was $61.89{\pm}2.68$ at 1.5T and $47.64{\pm}13.34$ at 3.0T. The maximum percentage of signal intensity change due to the susceptibility effect inactivation region was 3.36% at TE 66ms in 1.5T 10.05% at TE 46ms in 3.0T, respectively. The signal intensity change of 3.0T was about 3 times bigger than of 1.5T. The calculated optimum TE value was consistent with TE values which were obtained from the maximum signal change for each TE. Conclusion : In this study, the 3.0T MRI was clearly more sensitive, about three times bigger than the 1.5T in detecting the susceptibility due to the deoxyhemoglobin level change in the functional MR imaging. So the 3.0T fMRI I ore useful than 1.5T.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.55-64
• /
• 2006

As digital systems were introduced to automotive design in the mid 1980s, the design process has adopted many digital programs to save time compared to the conventional hand drafting. Digital technology was introduced not only to satisfy the reeds of the global environment, as the number of automobiles exported to many different parts of the world has increased, but also to save time and effort in developing several models of quality automobiles. Therefore, every automotive manufacturer in the world has expanded its virtual reality(VR) studio to establish visualization systems that visualize automobiles in the actual size and a co-operation system that enables simultaneous feedback from all of its design studios around the world. Unlike the existing design reviewing methos, the new improved feedback system is assessed as a reasonable method to evaluates and understand how the automobiles are actually manufactured in simulation. It is especially helpful when advanced products and concept cars require fast results. Other strengths of the new system include shorter development period, cost efficiency, no more manual labor, various designs within a short period of time, and realistic visualization of concepts. Large-scale products, including automobiles, need to be projected in the actual size and high clarity through the Power-wall System and are examined in a virtual space called a Cave. Therefore, it took much time to establish digital infrastructure. An infrastructure would constantly require system improvement and performance enhancement, but it is certain that now is the right time for the take-off to utilizing the strengths of digital design and improve the weaknesses. In this respect, this study provided an understanding of the importance of digital design based on digital reinforcements and examined an effective utilization of digital technology for an efficient development of automobiles in the future.