• 조명전기설비학회논문지
• /
• 제16권4호
• /
• pp.108-116
• /
• 2002

본 논문은 인체에 대전된 정전기 방전전압 파형의 측정과 특성 분석에 관한 것으로 정전기 고속과도전압 측정기의 동작원리와 설계기법에 대하에 기술하였다. 여러 가지 실험조건에서 인체에 대전된 전하에 의해 발생한 정전기방전전압의 피크값과 상승시간을 분석하였다. 제안된 전압측정계의 주파수대역은 DC-400[MHz]이다. 각 실험조건에서 정전기 방전전압과 전류의 파형은 거의 비슷하였으며, 크기도 비례적 관계를 나타내었다. 빠른 접근일 때가 느린 접근일 때 보다 빠른 초기상승시간의 정전기방전전압이 나타났다. 인체에 의한 직접 방전전압은 비교적 초기상승시간이 10-30[ns]로 길었으나, 크기는 작았다. 반면에 손에 쥔 금속체를 통한 방전전압은 1~3[ns]의 짧은 상승시간을 가지며 피크값은 매우 크게 나타났다. 결국 정전기 방전전압과 전류 파형은 정전기 방전을 일으키는 접촉물체와 접근속도에 깊은 관계가 있음을 알았으며, 본 연구의 결과는 정전기 장해방지장치의 설계를 위한 기초자료로 활용될 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1396_1397
• /
• 2009

Recently, there has been considerable interest in electromagnetic pulse (EMP) source for no lethal directed energy weaponry applications. The compactness of the Marx generator, coupled with its ability to be powered by battery technology, makes it a viable handled impulse source. The marx generator has 2 stages. Each stage was constructed one charging capacitor, two electrodes and one charging resistor. A inductance structure is used in order to improve the switching performances fo the whole generator. The experiments of rise time in pure gas and mixtures of gases were described. The experimental results show that the rise time characteristics of the marx generator can be controlled through varying insulation gas.

• International Journal of Advanced Culture Technology
• /
• 제10권4호
• /
• pp.434-443
• /
• 2022

CPR in High-rise building is one of the challenging tasks to 119 paramedics, evacuating patient from the narrow and vertical area. This study was built to compare the method of mechanical CPR and manual CPR is to maximizing on-scene treatment time, and minimizing the hand-off time in cardiac arrest, transporting patient as fast as possible. The electronic data research (Science, Pubmed, Medline, Medline and 55 academic DB interworking) was conducted, and five articles were included by reviewing and excluding through the Covidence program and Review Manager version 5.4(Cochrane Collaboration). OHCA occurring on the higher floor indicates lower in survival. A total studies uniformly reported mechanical CPR is more effective during the high-rise building evacuation, than manual CPR in rate, depth, and hands-on time of chest compression. Use of mechanical CPR device is more suitable in case of High-rise building OHCA to improve the survival rate which is affected by high-quality CPR.

• 한국진공학회지
• /
• 제5권4호
• /
• pp.284-291
• /
• 1996

차세대 반도체 제조공정을 위한 고진공 클러스터 장비용 반송모듈에 대해 고속 응답이 가능한 압력제어 장치의 구현과 그 성능시험을 수행하였다. 일반적인 자동 유량조절기가 가지고 있는 저속 응답에 대한 문제점을 해결하기 위하여 압력제어 순서를 매우 효과적으로 최적화하기 위하여 새로운 실험방법이 제시되었다. 압력제어를 시작하는 시점과 Ziegler-Nichols 제어방법에 의한 조율 상수들을 조절함으로써 매우 안정되고 빠른 응답이 가능한 압력제어를 성공적으로 달성하였다. 반송압력이 $10\times 10^{-5}$ torr인 경우, 질소의 초기유량을 21 sccm으로 설정한 수 4초 시각부터 실제적인 압력제어가 시작되었다. 그 결과, 최대 압력오차가 설정값에 대해 $\pm$0.5% 이하에서 안정화 시간은 10 sec 이내로 기존 실험방법과 비교해 볼 때 70% 정도 개선된 우수한 성능을 얻을 수 있었다. 이때 rise rate는 0.02 torr/sec, the lag time는 0.15sec, the sampling period는 0.5 sec이였다. 이러한 실험결과를 설명하기 위하여 이론적인 모델이 유도되었으며, $\omega$=-1.0일 때 실험결과와 잘 일치함을 알 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제3권1호
• /
• pp.36-42
• /
• 2008

In a gas insulated substation (GIS), Very Fast Transient Over-voltages (VFTOs) are generated due to switching operations and ground faults. These fast transients are associated with high frequency components of the order of a few hundreds of MHz. These transients may cause internal faults i.e., layer-to-layer faults or minor faults in a capacitively graded bushing, which is one of the important pieces of terminal equipment for GIS. In the present study, the PSPICE model has been developed to calculate the voltage distribution across the layers of 420kV graded bushing for high frequency pulses of rise time 1 to 50ns, which simulate the VFTO. For this simulation, an equivalent electrical network of bushing with different equivalent layers has been considered. The effect of different equivalent layers modeling circuits on the non-uniform voltage factor has been analysed. The influence of copper strip inductance on voltage distribution across layers has also been analysed for various rise times of high frequency transients. Finally, the leakage current of the bushing is calculated for evaluating the bushing condition under these transients.

• 천문학회보
• /
• 제37권2호
• /
• pp.66-66
• /
• 2012

We describe the space project of Ultra-Fast Flash Observatory (UFFO), which will observe early optical photons from gamma-ray bursts (GRBs) with a sub-second optical response, for the first time. The UFFO will probe the early optical rise of GRBs, opening a completely new frontier in GRB and transient studies, using a fast-response rotatable mirror system which redirects opitical path to telescope instead of slewing of telescopes or spacecraft. In our small UFFO-Pathfinder experiment, scheduled to launch aboard the Lomonosov satellite in June 2012, we use a motorized mirror in our Slewing Mirror Telescope instrument to achieve less than one second optical response after X-ray trigger. We describe the science and the mission of the UFFO project, including a serious version called UFFO-100 which will be launched in 2014. With our program of ultra-fast optical response GRB observatories, we aim to gain a deeper understanding of GRB mechanisms, and potentially open up the z>10 universe to study via GRB as point source emission probes.

• 전기학회논문지
• /
• 제59권10호
• /
• pp.1850-1855
• /
• 2010

The application field of the pulse power is very wide. Recently, Pulse power technologies take a large place in several applications. Then, many civil and military applications proceed. Marx generator is widely used in high voltage applications. Marx generator is widely used in high voltage applications, such as eletromagnetic wave and power lasers. This paper, we described about the high voltage pulse generator. A compact size high voltage pulse generator with nanosecnd rise time has been fabricated and investigated experimentally. The marx generator has 2 stages. Each stage was constructed one charging capacitor, two electrodes and one charging resistor. A inductance structure is used in order to improve the switching performances fo the whole generator. The experiments of rise time in pure gas and mixtures of gases were described. We tested the Marx generator at different insulation gas. the results show that the dielectric strength of the $N_2-SF_6$ mixture was significantly increased compared with pure nitrogen gas. The experimental results show that the rise time characteristics of the Marx generator can be controlled through varying insulation gas.

• 한국전기전자재료학회논문지
• /
• 제27권5호
• /
• pp.303-306
• /
• 2014

In this paper, by using a dual frequency liquid crystal material, we propose a liquid crystal device with a fast response characteristics. The dual frequency liquid crystal material has a positive dielectric anisotropy value at a low frequency. With a high frequency, the dielectric anisotropy becomes negative. Therefore, the relaxation process is governed by not only the elastic deformation, but also the dielectric interaction. The measured decay time and rise time were 0.88 ms and 0.33 ms, respectively.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.535-539
• /
• 2008

Recently mobile devices can transmit mass data contained multi-media contents. According these flow, a demand for fast data transmission is being risen, so we acutely require remarkable technology that overcome mobile communication's poor environment and rise data transmission volume. Because it can be satisfied these needs, the OFDM(Orthogonal Frequency Division Multiplexing) that rise data transmission volume using efficient frequency, and MIMO(Multiple Input Multiple Output) that rise transmission confidence and data transmission volume using numbers of antenna is attended. Before design of MIMO-OFDM System we want to make an analysis for theory of its systems, and we want to design MIMO-OFDM simulator for verify an ability of modulation, data volume and numbers of antenna.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권3호
• /
• pp.8-13
• /
• 2007

A hybrid fuzzy PID controller for a pneumatic chamber is proposed in this paper. First, a mathematical model of a pneumatic pressure servocontrol system was developed where separate implementations of a PID controller and a fuzzy controller were made. The experimental results using a step input signal revealed that the PID controller accurately controlled the steady-state pressure but did not robustly handle parameter variations in the system while the fuzzy controller provided a fast rise time and low overshoot of the pressure in the system. In order to attain the advantages of both the fuzzy and PID controllers, a hybrid control scheme was developed. The experimental results show that the hybrid fuzzy PID controller proposed in this study does indeed possess the advantages of both PID and fuzzy controllers. Hence, it can be concluded that the hybrid fuzzy PID controller is suited for high-precision control of pressure in a pneumatic chamber.