• 자원리싸이클링
• /
• 제18권3호
• /
• pp.42-48
• /
• 2009

고로 수쇄 슬래그에 알칼리 자극제(NaOH+$Na_2O.SiO_2$)를 첨가한 계는 보통 포틀랜드 시멘트의 수화반응과 다르게, 수화반응 초기에 높은 농도의 $OH^-,\;[SiO_4]^{4-}$ 이온이 존재하게 되므로, 유도기가 없이 수화반응이 빠르게 진행되며, 슬래그 입자 주위에 수화물에 의한 reaction rim을 형성한다 반응기간 1일부터 고로 수쇄 슬래그 입자 주위에 $0.6{\mu}m$의 reaction rim이 형성되었고, 반응기간이 증가함에 따라 reaction rim의 두께는 증가하여 28일에 $1{\mu}m$으로 성장하였으며, 미반응 고로 수쇄 슬래그 입자는 각진 형태에서 구형의 형태로 변화되었다. 슬래그 입자의 내부로부터 reaction rim으로 갈수록 Ca/Si의 몰비는 감소하는 경향을 나타냈었다. 그리고 반응기간이 경과할수록 슬래그 입자 내부와 reaction rim간의 Ca/Si 몰비 차이는 작아졌으며, 생성된 수화물은 저결정성의 Ca/Si 몰비가 1.5 미만인 CSH(I)이었다.

• 대한화학회지
• /
• 제53권6호
• /
• pp.709-716
• /
• 2009

일정한 이온 세기의 알칼리 용액에서 과망간산에 의한 프포독심 프록세틸(Cefpodoxime Proxetil) 의 산화의 속도론적 경로가 분광광도법적으로 연구되었다. 그 반응은 과망간산 이온 농도에서 일차 속도론적으로 나타났으며, 프포독심 산과 알칼리 농도에서 단일 이하의 차수를 나타내었다. 용매의 이온 세기가 증가함에 따라 속도도 증가하였다. 산화 반응은 프포독심 산과 함께 복합체를 형성하는 알칼리-과망간산 종들을 통하여 진행된다. 반응물을 만들기 위해서 프포독심 산의 자유 라디칼과 과망간산의 다른 분자 사이의 빠른 반응에 이어서 다음 분해가 천천히 진행된다. 다양한 온도에서 반응의 조사는 제안하는 메커니즘의 느린 단계를 고려한 활성화 변수들의 결정할 수 있게 하고 일차 속도론을 따른다. 제안하는 메커니즘과 유도된 속도 법칙들은 관찰된 속도들과 일치하였다.

• Bulletin of the Korean Chemical Society
• /
• 제34권8호
• /
• pp.2425-2430
• /
• 2013

A simple, fast and robust analytical method was developed to determine imatinib in human plasma using liquid chromatography-tandem mass spectrometry with electrospray ionization in the positive ion mode. Imatinib and labeled internal standard were extracted from plasma with a simple protein precipitation. The chromatographic separation was performed using an isocratic elution of mobile phase involving 5.0 mM ammonium formate in water-5.0 mM ammonium formate in methanol (30:70, v/v) over 3.0 min on reversed-stationary phase. The detection was performed using a triple-quadrupole tandem mass spectrometer in multiple-reaction monitoring mode. The developed method was validated with lower limit of quantification of 10 ng/mL. The calibration curve was linear over 10-2000 ng/mL ($R^2$ > 0.99). The method validation parameters met the acceptance criteria. The spiked samples and standard solutions were stable under conditions for storage and handling. The reliable method was successfully applied to real sample analyses and thus a pharmacokinetic study in 27 healthy Korean male volunteers.

• 한국균학회지
• /
• 제37권2호
• /
• pp.161-166
• /
• 2009

The purpose of the present study is to develop a simple, fast and sensitive LC/MS method for simultaneous separation and the determination of an active component in the oriental medicinal mushroom Cordyceps militaris. Based on this work, the contents of cordycepin in Cordyceps militaris fruiting cultivated on various media were determined and compared. And also, the nutritional components such as minerals and vitamins were determined in order to provide useful information to consumer as a food material. The analysis methods of nutritional components were chosen on the basis of AOAC. The optimum separation for cordycepin was achieved using a solvent gradient consisting of the mixture of 0.1% formic acid in methanol (solvent B) in a background of 0.1% formic acid in water (solvent A) as a mobile phase and a 3.0${\times}$150 Waters XTera column. Selective ion monitoring (SIR) mode ([M+H]+ at m/z 252) was used for quantitative analysis of cordycepin. The cultivated Cordyceps militaris on various media contained 1~14 /g of cordycepin, 0.65~1.08% of thiamine, 0.86~7.17% of riboflavin, and 3.01~5.26% of niacin. The content of mineral components varied on categories, especially contained 500~3500% of potassium as a major mineral. Cordycepin, niacin and potassium were found much higher in the fruiting cultivated with soy power media (gold 10) than other media.

• 전기화학회지
• /
• 제16권3호
• /
• pp.157-161
• /
• 2013

다공성 $LiMn_{0.6}Fe_{0.4}PO_4$ (LMFP)를 졸-겔법을 이용하여 합성하였고, 원료물질을 양론비로 혼합한 후 혼합물을 $600^{\circ}C$에서 10시간 동안 가열하여 입자 표면 전체에 전도성 탄소물질이 균일하게 형성된 LMFP을 제조하였다. LMFP의 결정구조는 리트펠트법에 의해 조사하였고, 표면구조와 기공특성은 주사전자현미경, 투과전자현미경, BET로 분석하였다. 제조된 LMFP는 표면적이 크고, 입자 표면에는 웹(web) 형태의 다공성 탄소층이 균일하게 형성되어 있는 것을 확인하였다. 상온에서 LMFP를 양극으로 사용하여 0.1 C의 전류밀도에서 초기방전용량은 152 mAh/g, 에너지밀도는 570 Wh/kg로 높았고 사이클 성능도 장기적으로 안정적이었다. 졸-겔법에 의해 제조된 LMFP는 높은 기공도와 균일한 탄소코팅에 의한 시너지효과로 이온확산이 용이하여 우수한 전기화학적 특성을 나타내었다.

• 세라미스트
• /
• 제23권2호
• /
• pp.184-199
• /
• 2020

The solid oxide fuel cells (SOFCs) are the one of the most promising energy conversion devices which can directly convert chemical energy into electric power with high efficiency and low emission. The lowering operating temperature below 800 ℃ has been considered as the mostly considerable research and development for commercialization. The major issue is to maintain reasonably high performance of SOFCs at reduced temperatures due to increment of polarization resistance of electrodes and electrolyte. Thus, the alternative materials with high catalytic activities and fast oxygen ion conductivity are required. For recent advances in electrolyte materials and technology, newly designed, highly conductive electrolyte materials and structural engineering of them provide a new path for further reduction in ohmic polarization resistance from electrolytes. Here, a powerful strategy of the bilayer concept with various oxide electrolytes of SOFCs are briefly reviewed. These recent developments also highlight the need for electrolytes with greater conductivity to achieve a high performance, thus providing a useful guidance for the rational design of cell structures for SOFCs. Moreover, cell design, materials compatibility, processing methods, are discussed, along with their role in determining cell performance. Results from state-of-the-art SOFCs are presented, and future prospects are discussed.

• Journal of Microbiology
• /
• 제33권3호
• /
• pp.244-251
• /
• 1995

An extracellular protease of Salmonella schottmulleri was purified from culture filtrate by using 0-75% ammonium sulfate precipitation, DEAE Sepharose Fast Flow ion exchange chromatography, Ultrogel HA chromatography and Sephacryl S-200 HR molecular sieve chromatography. To measure enzyme activity, synthetic dipeptide substrate (CBZ-arg-arg-AFC) with low molecular weight was employed as substrate. The molecular weight of the purified enzyme was approximately 80 kDa when determined by gel filtration on Sephacryl S-200 HR and 73 kDa when estimated by SDS-PAGE. The isoelectric point was 5.45. The activity of the purified enzyme was inhibited by metal chelating agesnts such as EDTA and 1.10-phenanthroline. The divalent cations, such as Ca$\^$2+/, Zn$\^$2+/, Fe$\^$2+/, Mg$\^$2+/ enhanced its activity. These results suggested that it was a metalloprotease. It had a narrow pH optimum of 6.5-7.5 with a maximum at pH 7.0 and a temperature optimum of 40.deg.C. It was stable at least for 1 week at 40.deg.C and maintained its activity for 24 hours at 50.deg.C, but it was rapidly inactivated at 65.deg.C. This protease was shown to be sensitive to sodium 50.deg.C, but it was rapidly inactivated at 65.deg.C. This protease was shown to be sensitive to sodium 50.deg.C, but it was rapidly inactivated at 65.deg.C. This protease was shown to be sensitive to sodium 50.deg.C, but it was rapidly inactivated at 65.deg.C. This protease was shown to be sensitive to sodium dodecyl sulfate (SDS) and was inactivated in a dose-dependent manner. However, it was resistant to Triton X-100 and the activity was enhanced to 32.3% with treatment of 0.025% Triton X-100.

• 멤브레인
• /
• 제29권1호
• /
• pp.30-36
• /
• 2019

본 연구에서는 titanium nitride (TiN) 나노 섬유와 poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT-PSS) 전도성 고분자로 이루어진 전극과 poly(vinyl alcohol) (PVA) 기반 고분자 전해질 분리막을 이용하여 슈퍼 캐퍼시터를 제조하였다. TiN 나노 섬유의 경우 높은 전기 전도도와 이차원적 구조로 인한 스케폴드 효과를 기대할 수 있다는 점에서 전극 물질로 사용되었다. PEDOT-PSS 전도성 고분자는 수소 이온과 산화-환원 반응을 통해 보다 높은 정전용량을 나타낼 수 있으며 용액상에 분산이 용이해 유무기 복합제를 형성하기에 적합하였다. PVA 기반의 고분자 전해질 분리막은 기존의 액상의 전해질의 문제인 외부 충격에 대한 안정성을 확보할 수 있으며 염으로 사용된 $H_3PO_4$의 경우 수소 이온은 빠른 확산으로 인해 캐퍼시터의 충방전 효율에 이점이 있다. 본 연구에서 보고된 PEDOT-PSS/TiN 슈퍼캐퍼시터의 정전용량은 약 75 F/g으로 기존의 탄소기반 캐퍼시터에 비해 큰 폭으로 증가한 값이다.

• 한국재료학회지
• /
• 제31권12호
• /
• pp.710-718
• /
• 2021

Recently, due to high theoretical capacitance and excellent ion diffusion rate caused by the 2D layered crystal structure, transition metal hydroxides (TMHs) have generated considerable attention as active materials in supercapacitors (or electrochemical capacitors). However, TMHs should be designed using morphological or structural modification if they are to be used as active materials in supercapacitors, because they have insulation properties that induce low charge transfer rate. This study aims to modify the morphological structure for high cycling stability and fast charge storage kinetics of TMHs through the use of nickel cobalt hydroxide [NiCo(OH)₂] decorated on nickel foam. Among the samples used, needle-like NiCo(OH)₂ decorated on nickel foam offers a high specific capacitance (1110.9 F/g at current density of 0.5 A/g) with good rate capability (1110.9 - 746.7 F/g at current densities of 0.5 - 10.0 A/g). Moreover, at a high current density (10.0 A/g), a remarkable capacitance (713.8 F/g) and capacitance retention of 95.6% after 5000 cycles are noted. These results are attributed to high charge storage sites of needle-like NiCo(OH)₂ and uniformly grown NiCo(OH)₂ on nickel foam surface.

• Journal of Electrochemical Science and Technology
• /
• 제13권4호
• /
• pp.472-478
• /
• 2022

Solar energy harvesting is practiced by various nations for the purpose of energy security and environment preservation in order to reduce overdependence on oil. Converting solar energy into electrical energy through Photovoltaic (PV) module can take place either in on-grid or off-grid applications. In recent time Lithium battery is exhibiting its presence in on-grid applications but its role in off-grid application is rarely discussed in the literature. The preliminary capacity and Peukert's study indicated that the battery quality is good and can be subjected for life cycle test. The capacity of the battery was 10.82 Ah at 1 A discharge current and the slope of 1.0117 in the Peukert's study indicated the reaction is very fast and independent on rate of discharge. In this study Lithium Iron Phosphate battery (LFP) after initial characterization was subjected to life cycle test which is specific to solar off-grid application as defined in IEC standard. The battery has delivered just 6 endurance units at room temperature before its capacity reached 75% of rated value. The low life of LFP battery in off-grid application is discussed based on State of Charge (SOC) operating window. The battery was operated both in high and low SOC's in off-grid application and both are detrimental to life of lithium battery. High SOC operation resulted in cell-to-cell variation and low SOC operation resulted in lithium plating on negative electrode. It is suggested that to make it more suitable for off-grid applications the battery by default has to be overdesigned by nearly 40% of its rated capacity.