• Explosives and Blasting
• /
• v.16 no.3
• /
• pp.35-48
• /
• 1998

An overview of the plasma rock fragmentation system, the first commercial application of plasma blasting, is presented. Plasma blasting is based on the fast delivery of stored electrical energy to fracture the rock. The capacitor bank, switching device, cable and blasting electrode employed in the system are described. Utilization of the chemical energy delivered from the electrolyte and the development of a large charge transfer switch using pseudospark enabled the commerciailzaion. The vibration and noise level of the blasting is acceptable in the most ground breaking.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.10B
• /
• pp.1464-1469
• /
• 2001

본 논문에서는 디지털 하이브리드 위상고정루프(Digital Hybrid Phase-Locked Loop, DHPLL) 주파수 합성기 구조에서 고 순도 스펙트럼과 초고속 스위칭 속도를 위한 설계기술을 제안한다. D/A 변환기 출력으로 전압제어발진기(Voltage Controlled Oscillator, VCO)를 구동하는 개 루프(open-loop) 구성 방식과 기존 위상고정루프(Phase Locked Loop, PLL)의 폐 루프(closed-loop) 구성 방식을 혼합한 하이브리드 구조의 주파수 합성기를 고려하여, 시스템 변수(개 루프 대역과 위상 여유)와 성능 파라미터(정착시간, 위상 잡음, 그리고 최대 오버슈트(Max. overshoot)의 관계를 연구하였다. 그리고 이 관계를 통해 스펙트럼 순도와 스위칭 속도를 향상시키기 위한 최적의 3가지 설계방안을 제시한다. 컴퓨터 시뮬레이션 결과, 주파수 스위칭 과정에서 발생하는 최대 오버슈트가 0.0991%이고 완전 정상상태 도달시간은 0.288msec이다. offset 주파수 10KHz에서 위상 잡음은 -128.15dBc이다.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.60-63
• /
• 1988

An adaptive model following controller is designed using the theory of variable structure systems. The proposed method allows the designer to satisfy the requirements of short sliding plane reaching time and chattering reduction in the sliding mode. This method is based on the modified condition for the sliding mode. The result of computer simulation shows that state trajectories reach switching plane fast and chattering is reduced.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.207-210
• /
• 2001

Electrical equipment for railway is always experiencing wear and degradation by mechanical, electrical and environmental stress in service and the fault or the accident of high voltage main circuit directly causes operation interruption. Particularly propulsion drive of high speed switching inverter takes the form of specific degradation mechanism such as fast rising transient surge, reflective overvoltage and harmonic stress, and it is known that it threatens the long life and the reliability of electrical equipment. In this paper, statistics of fault and accident on main electrical equipment for railway are presented and also insulation degradation mechanism, which governs end life of electrical device, is analyzed. Finally the method of fault respondence and reliability improvement on the main electrical equipments will be reviewed in order to prevent operation interruption.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.65-68
• /
• 1998

The mechanism of response time and viewing angle in in-plane switching ( IPS ) liquid crystal display ( LCD ) were investigated. The response time of photo-aligned IPS-LCD is fast compared with rubbing-aligned IPS-LCD on polyimide ( PI ) surface. The decay time $\tau$$\_$d/ is decreased with increasing the azimuthal anchoring energy A $\psi$ due to the steric interaction between the LC molecules and side chain of polymer. The viewing angle of IPS-LCD is increased by using photo-depolymerizatin method ; about ${\pm}$70$^{\circ}$at all direction.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.193-194
• /
• 2012

The bidirectional boost-buck chopper type AC voltage regulator is presented in this paper. The main characteristic of the AC chopper is the fact that it generates an output AC voltage larger or lower than the input AC one, depending of the instantaneous duty-cycle. Boost-buck chopper type AC voltage regulator, derived from the DC chopper modulated method, is a kind of direct AC-AC voltage converter and has many advantages: such as fast response speed, low harmonics and high power factor. It adopts high switching frequency AC chopper technique and can do wide range step less AC voltage regulation.

• Journal of the Optical Society of Korea
• /
• v.18 no.6
• /
• pp.783-787
• /
• 2014

This paper presents an improved vertical alignment nematic liquid crystal mode characterized by the protrusions or slits of the top substrate and additional stripe type common electrodes with polarity switching of the bottom substrate to improve multi-domain vertically aligned (MVA) and patterned vertically aligned (PVA) nematic modes. MVA and PVA modes have disadvantages such as an LC disclination in the vicinity of the middle region of electrodes between the top and bottom protrusions in MVA mode or the top and bottom slits in PVA mode. Therefore, the stripe type common electrode generating a horizontal electric field and the protrusion or slit producing some pretilt of liquid crystals (LCs) were used to improve the LC disclination, which influences the transmittance and response speed. The simulation results showed that the proposed VA mode has higher transmittance than the MVA and PVA modes. As a result, the proposed VA mode can improve the response speed and transmittance remarkably, which makes it useful for upgrading the LCD display quality.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.958-961
• /
• 1998

In this paper, a three phase boost converter that operates with unity power factor and sinusodial input currents is presented. The current control of the converter is based on the space vector strategy with fixed switching frequency and the input current tracks the reference current within one sampling time interval. Space vector strategy for current control was materialized as a digital control method by using DSP. By using this control strategy low ripples in the output voltage, low harmonics in the input current and fast dynamic responses are achieved with a small capacitance in the dc link.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.731-736
• /
• 2014

An organic junction transistor with a vertical structure based on an active layer of poly(3-hexylthiophene) was fabricated by facile micro-contact printing combined with the Langmuir-Schaefer technique, without conventional e-beam or photo-lithography. Direct printing and subsequent annealing of Au-nanoparticles provided control over the thickness of the Au electrode and hence control of the electrical contact between the Au electrode and the active layer, ohmic or Schottky. The junction showed similar current-voltage characteristics to an NPN-type transistor. Current through the emitter was simply controllable by the base voltage and a high transconductance of ~0.2 mS was obtained. This novel fabrication method can be applied to amplifying or fast switching organic devices.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.344-347
• /
• 2008

We fabricated the outer type-dynamic microlens array using a surface-stabilized ferroelectric liquid crystal, UV curable polymer and the stacked liquid crystalline polymer. The outer type-microlens array has a lower driving voltage and fast switching property. It is applicable to a variety of optical systems.