• Culinary science and hospitality research
• /
• v.20 no.1
• /
• pp.38-54
• /
• 2014

The purpose of this study is to investigate the effects of customers' perception of corporate associations on trust, loyalty, revisit intention, and switching intention in the foodservice company and verify if there are significant moderating effects between family restaurants and fast-food restaurants. A total of 552 restaurant patrons in Korea participated in the survey. The results showed that corporate ability association and corporate social responsibility association among corporate associations had a significant effect on customers' trust, which had a positive significant influence on loyalty. Moreover, customers' loyalty had a significant effect on customers' revisit and switching intention. In addition, the moderating effects of company types are observed in the relationships among customers' perception of corporate associations and trust. Limitations of the study and future research directions are also discussed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.5
• /
• pp.133-142
• /
• 2004

Recently, the growth of Internet and a variety of multimedia services through Internet increasingly demands high-speed packet transmission, the new routing function, and QoS guarantee on conventional routers. Thus, a new switching mechanical called the MPLS(Multi-Protocol Label Switching), was proposed by IETF(Internet Engineering Task Force) as a solution to meet these demands. In addition the deployment of MPLS network supporting Differentiated Services is required. In this paper, we propose the architecture of the MPLS switch supporting Differentiated Services in the MPLS-based network. The traffic conditioner consists of a classifier, a meter, and a marker. The VOQ-PHB module, which combines input Queue with each PHB queue, is implemented to utilize the resources efficiently. It employs the Priority-iSLIP scheduling algorithm to support high-speed switching. We have designed and verified the new and fast hardware architecture of VOQ-PHB and the traffic conditioner for QoS and high-speed switching using NS-2 simulator. In addition, the proposed architecture is modeled in VHDL, synthesized and verified by the VSS analyzer from SYNOPSYS. Finally, to justify the validity of the hardware architecture, the proposed architecture is placed and routed using Apollo tool.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.12 s.91
• /
• pp.1161-1167
• /
• 2004

The conventional PLL(phase locked loop) frequency synthesizer takes a long switching time because of the inherent closed-loop structure. The digital hybrid PLL(DH-PLL) which includes the open-loop structure into the conventional PLL synthesizer has been studied to overcome this demerit. It operates in high speed, but the hardware complexity and power consumption are the serious problem because the DLT(digital look-up table) is usually implemented by the ROM which contains the transfer characteristic of VCO(voltage controlled oscillator). This paper proposes a new DH-PLL using a very simple DLT-replacement digital logic instead of the complex ROM-type DLT. Also, a timing synchronization circuit for the very small over-shoot and shorter settling time is designed for the ultra fast switching speed at every frequency synthesis. The hardware complexity gets decreased to about $28\%,$ as compared with the conventional DH-PLL. The high speed switching characteristic of the frequency synthesis process can be verified by the computer simulation and the circuit implementation.

• Journal of IKEEE
• /
• v.10 no.2 s.19
• /
• pp.134-140
• /
• 2006

This paper proposed a low power resource allocation algorithm for the minimum switching activity of operators in high level synthesis. In this paper, the proposed method finds switching activity in circuit each functional unit exchange for binary sequence length and value bit are logic one value. To use the switching activity was found the allocation with minimal power consumption, the proposed method visits all control steps one by one and determines the allocation with minimal power consumption at each control step. As the existing method, the execution time can be fast according to use the number of operator and maximal control step. And it is the reduction effect from 8.5% to 9.3%.

• Journal of Distribution Science
• /
• v.16 no.8
• /
• pp.69-77
• /
• 2018

Purpose - With growing competition in the service distribution industry, the importance of managing customer complaints has increased. If firms handle customer complaints effectively, they can strengthen customer loyalty and repurchase intention. Many studies have focused on customers expressing complaints, yet research on silent customers is scant. This study focuses on two types of complainers and non-complainers. In other words, this study is to examine the value of voice complaint intention and no-action intention. This study also investigates how perceptual and relational factors affect complaint intention. Research design, data, and methodology - This study was carried out using the survey with undergraduate students who have faced a service failure in a retail store(fast foods, electronics, apparel). And if such complaint were to occur again, respondents were asked about any possible action they would take. 300 questionnaires were distributed and a total of 279 respondents provided complete and usable data. The sample consisted of 158 males(56.6%) and 121 females(43.4%). The structural equation modeling analysis was used for the hypothesis test. Results - The results are as follows. First, attitude toward complaining, likelihood of successful complaint, and ease of complaint were positively related to voice complaint intention. Second, attitude toward complaining, likelihood of successful complaint, and ease of complaint were negatively related to no-action intention. Third, commitment was positively related to voice complaint intention but didn't have a significant negative impact on no action. Forth, voice complaint behavior reduced switching intention and no-action intention enhanced switching intention. Conclusions - The findings of this study confirm the value of complaint behavior and show voice complaint intention and no-action intention should be managed differently. Voice complaint intention is evaluated positively because it reflects customers' concerns about the company, while no-action intention is evaluated negatively. Attitude toward complaing is the most effective in increasing voice complaint intention and likelihood of successful complaint is a major factor in reducing no-action intention. Also, in explaining switching intention, voice complaint intention plays a more important role than no-action intention.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.2
• /
• pp.353-360
• /
• 2017

Recently, due to physical limitation of Si based power semiconductor, development speed of switching power semiconductors is falling and it is difficult to expect any further performance improvements. SiC based power semiconductor with superior characteristic than Si-based power semiconductor have been developed to overcome these limitations. however, there is not method to apply for real system. Therefore, suggested the feasibility and solution for SiC-based power semiconductor system. design to 1kW class DC-DC boost converter and demonstrated the superiority of SiC MOSFET under the same operating conditions by analyzing switching frequency, duty ratio, voltage and current, and comparing with Si based power semiconductor through experimental efficiency according to each system load. The SiC MOSFET has high efficiency and fast switching speed, and can be designed with small inductors and capacitors which has the advantage of volume reduction of the entire system.

• Journal of the Korean Magnetics Society
• /
• v.17 no.5
• /
• pp.188-193
• /
• 2007

We simulated the magnetization reversal behavior of submicron-thickness magnetic films by applying pulses of sub-ns-long durations and amplitudes along the easy axis. The films were rectangular and elliptical $Ni_{80}Fe_{20}$, and their thickness was 2 nm and 4 nm. We observed different behaviors depending upon the shape and thickness of the films and found a normal non-switching in regions in which we expected complete switching after relaxation. In the elliptical film, the non-switching regions were found to be random and to be widely distributed throughout the switching map. The strong demagnetization field along the z-axis, the film thickness direction, is likely responsible for this abnormal behavior. In the rectangular film, the abnormal non-switching regions were less distributed than they were in the elliptical film due to edge domains resulting from the small $M_z$ or demagnetization field during the switching. Our simulation confirms that large demagnetization is detrimental to the ultra-fast magnetization reversal of magnetic ultra-thin films.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.5
• /
• pp.232-242
• /
• 2002

In a MPLS(Multiprotocol Label Switching) network, it is important to reduce the number of labels and LSP(Lable Switched Path)s for network resource management. MTP(Multipoint-to-Point) LSP can be used to solve this problem. In consideration of traffic engineering, MTP LSP must be chosen to enhance the availability of network and link utilization. Also, a fast mechanism to setup MTP LSPs is required for rerouting capability against link failure. In this paper, we propose a fast MTP LSP traffic engineering of multipath MTP LSP by using a mapping of a MTP LSP upon Diffserv PHBs(Per Hop Behavior) in a Diffserv-capable MPLS network. In the proposed traffic engineering, we determine multiple MTP LSPs in a hierarchical manner according to the characteristics of different services. By using Monte-Carlo method for traffic load balancing process, it provides fast rerouting capability in case of frequent link failure across large network. Out method produces to be nearly optimal within reasonable run-times. It's time complexity is in O( Cn$^2$logn) as conventional multipath routing and it is much faster than Linear Programming approach. Simulation results show that the proposed traffic engineering can be controlled effectively in an administrative manner and enhance the availability of network in comparison with conventional multipath routing.

• Convergence Security Journal
• /
• v.12 no.1
• /
• pp.35-42
• /
• 2012

Increase of data traffic and the advent of new real-time services require to change from the traditional TDM-based (Time Division Multiplexing) networks to the optical networks that soft and dynamic configuration. Voice and lease line services are main service area of the traditional TDM-based networks. This optical network became main infrastructure that offer many channel that can convey data, video, and voice. To provide high resilience against failures, Packet-optical networks must have an ability to maintain an acceptable level of service during network failures. Fast and resource optimized lightpath restoration strategies are urgent requirements for the near future Packet-optical networks with a Generalized Multi-Protocol Label Switching(GMPLS) control plane. The goal of this paper is to provide packet-optical network with a hierarchical multi-layer recovery in order to fast and coordinated restoration in packet-optical network/GMPLS, focusing on new implementation information. The proposed schemes do not need an extension of optical network signaling (routing) protocols for support.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.9 s.351
• /
• pp.10-16
• /
• 2006

This paper presents a fast switching CMOS frequency synthesizer with a new coarse tuning scheme for PHS applications. The proposed coarse tuning method selects the optimal tuning capacitances of the LC-VCO to optimize the phase noise and the lock-time. The measured lock-time is about $20{\mu}s$ and the phase noise is -121dBc/Hz at 600kHz offset. This chip is fabricated with $0.25{\mu}m$ CMOS technology, and the die area is $0.7mm{\times}2.1mm$. The power consumption is 54mW at 2.7V supply voltage.