• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.11_12
• /
• pp.587-597
• /
• 2005

Flash memory based embedded computing systems are becoming increasingly prevalent.These systems typically have to provide an instant start-up time. However, we observe that mounting a file system toy flash memory takes 1 to 25 seconds mainly depending on the flash capacity. Since the flash chip capacity is doubled in every year, this mounting time will soon become the most dominant reason of the delay of system start-up time Therefore, in this paper, we present instant mounting techniques for flash file systems by storing the In-memory file system metadata to flash memory when unmounting the file system and reloading the stored metadata quickly when mounting the file system. These metadata snapshot techniques are specifically developed for NOR- and NAND-type flash memories, while at the same time, overcoming their physical constraints. The proposed techniques check the validity of the stored snapshot and use the proposed fast trash recovery techniques when the snapshot is Invalid. Based on the experimental results, the proposed techniques can reduce the flash mounting time by about two orders of magnitude over the existing de facto standard flash file system, JFFS2.

• Journal of Information Technology Applications and Management
• /
• v.11 no.2
• /
• pp.29-43
• /
• 2004

As the development of an information technique, gradually, mobile device is going to be miniaturized and operates at high speed. By such the requirements, the devices using a flash memory as a storage media are increasing. The flash memory consumes low power, is a small size, and has a fast access time like the main memory. But the flash memory must erase for recording and the erase cycle is limited. JFFS is a representative filesystem which reflects the characteristics of the flash memory. JFFS to be consisted of LSF structure, writes new data to the flash memory in sequential, which is not related to a file size. Mounting a filesystem or an error recovery is achieved through the sequential approach. Therefore, the mounting delay time is happened according to the file system size. This paper proposes a MJFFS to use a multi-checkpoint information to manage a mass flash file system efficiently. A MJFFS, which improves JFFS, divides a flash memory into the block for suitable to the block device, and stores file information of a checkpoint structure at fixed interval. Therefore mounting and error recovery processing reduce efficiently a number of filesystem access by collecting a smaller checkpoint information than capacity of actual files. A MJFFS will be suitable to a mobile device owing to accomplish fast mounting and error recovery using advantage of log foundation filesystem and overcoming defect of JFFS.

• Journal of Information Processing Systems
• /
• v.2 no.3 s.4
• /
• pp.147-152
• /
• 2006

NAND flash memory-based embedded systems are becoming increasingly common. These embedded systems have to provide a fast boot time. In this paper, we have designed and proposed a flash file system for embedded systems that require fast booting. By using a Flash Image Area, which keeps the latest flash memory information such as types and status of all blocks, the file system mounting time can be reduced significantly. We have shown by experiments that our file system outperforms YAFFS and RFFS.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.121-121
• /
• 2000

This paper presents a design of macro-micro system for high-speed mounting of micro-chips. A macro motion device is driven by DC servomotor and ball screw mechanism. To obtain fast response, a micro motion device utilizes a precision elector magnetic actuator In order to reduce peak impact force, We evaluate the design parameters that have an effect on it. And a characteristic of response is simulated using PID controller in velocity and force control.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.139.2-139
• /
• 2001

This paper presents identification and control of a surface mounting system. The mount head of the system is modeled to analyze its dynamic characteristics, which is critical to the placement performance of the mounter. Based on this model, an identification work is carried out to estimate the modeled parameters by using genetic algorithm (GA), which plays a role of minimizing an error between the actual response and the model response. Having obtained the identified parameters, we design a disturbance observer control to compensate the friction. The disturbance observer can estimate the friction force and the uncertainty of the system. From the experimental results, it is found that the proposed disturbance observer plus PID controller show a better performance than PID controller alone. In order to accomplish a stable contact content control for fast mounting a ...

• Journal of Korea Multimedia Society
• /
• v.11 no.5
• /
• pp.651-660
• /
• 2008

Flash memory is widely used in embedded systems because of its benefits such as non-volatile, shock resistant, and low power consumption. However, NAND flash memory suffers from out-place-update, limited erase cycles, and page based read/write operations. To solve these problems, YAFFS and RFFS, the flash memory file systems, are proposed. However YAFFS takes long time to mount the file system, because all the files are scattered all around flash memory. Thus YAFFS needs to fully scan the flash memory. To provide fast mounting, RFFS has been proposed. It stores all the block information, the addresses of block information and meta data to use them at mounting time. However additional operations for the meta data management are decreasing the performance of the system. This paper presents a new NAND flash file system called ERFFS (Efficient and Reliable Flash File System) which provides fast mounting and recovery with minimum mata data management. Based on the experimental results, ERFFS reduces the flash mount/recovery time and the file system overhead.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.10 no.1
• /
• pp.31-45
• /
• 2006

Recently advanced device and sophisticated manufacture process by high-density, high-integration require critical inspection criteria in SMT(surface mounting technologies). Especially for solder paste which come out over 60% of inferior goods of all product, 3-dimensional inspection replaces 2-D inspection as a effectiveness substitute of this trend. Therefore this paper proposes a fast 3-D inspection system and measurement algorithm automatically inspecting 3-D solder paste of PCB in SMT assembly line. The proposed method generates 3-D surface of data using B-spline algorithm and then extracts to inspect the pad.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.9
• /
• pp.112-123
• /
• 1994

In this paper, inspection and subpixed alignment algorithms of SMD's (Surface Mounting Devices) using fuzzy morphology are proposed. First, camera calibration is performed and then the inspection algorithm detects defects such as lead bending and breaking using the ruler generated by fuzy morphology. The SMD having no defects is tested whether it is mounted in the specified position or not. The proposed subpixel alignment algorithm detects accurately orientation and position using subpixel interpolation. It consists of two parts: preprocessing and main processing steps, in which corner points and coarse orientation of a SMD are detected, and interpolation is used to obtain final parameters with wubpixel accuracy. The computer simulation shows that the proposed algorithms give more accurate parameters, and they can be applied to fast and accurate automatic surface mounting systems.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.3
• /
• pp.41-50
• /
• 2009

The flash memory has many advantages such as low power consumption, strong shock resistance, fast I/O and non-volatility. And it is increasingly used in the mobile storage device. Many researchers are studying the YAFFS, NAND flash file system, which is widely used in the embedded device. However, the existing YAFFS has two problems. First, it takes long time to mount the YAFFS file system because it scans whole spare areas in all pages. Second, the cleaning policy of the YAFFS does not consider the wear-leveling so that it cannot guarantee the duration of data completely. In order to solve these problems, this paper proposes a new content-based YAFFS that consists of a mounting time reduction technique and a content-cleaning policy by using content-based block management. The proposed method only scans partial spare areas of some special pages and provides the block swapping which enables the wear-leveling of data blocks. We performed experiments to compare the performance of the proposed method with those of the JFFS2 system and YAFFS system. Experimental results show that the proposed method reduces the average mounting time by 82.2% comparing with JFFS2 and 42.9% comparing with YAFFS. Besides, it increases the life time of the flash memory by 35% comparing with the existing YAFFS whereas no overheat is added.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.3
• /
• pp.184-193
• /
• 2007

Flash memory adoption in the mobile devices is increasing or vanous multimedia services such as audio, videos, and games. Although the traditional research issues such as out-place update, garbage collection, and wear-leveling are important, the performance, memory usage, and fast mount issues of flash memory file system are becoming much more important than ever because flash memory capacity is rapidly increasing. In this paper, we address the problems of the existing log-based flash memory file systems analytically and propose an efficient log-based file system, which produces higher performance, less memory usage and mount time than the existing log-based file systems. Our ideas are applied to a well-known log-based flash memory file system (YAFFS2) and the performance tests are conducted by comparing our prototype with YAFFS2. The experimental results show that our prototype achieves higher performance, less system memory usage, and faster mounting than YAFFS2, which is better than JFFS2.