• Title/Summary/Keyword: Fast Information Channel

Search Result 431, Processing Time 0.027 seconds

Management and Control Scheme for Next Generation Packet-Optical Transport Network (차세대 패킷광 통합망 관리 및 제어기술 연구)

  • Kang, Hyun-Joong;Kim, Hyun-Cheol
    • Convergence Security Journal
    • /
    • v.12 no.1
    • /
    • pp.35-42
    • /
    • 2012
  • Increase of data traffic and the advent of new real-time services require to change from the traditional TDM-based (Time Division Multiplexing) networks to the optical networks that soft and dynamic configuration. Voice and lease line services are main service area of the traditional TDM-based networks. This optical network became main infrastructure that offer many channel that can convey data, video, and voice. To provide high resilience against failures, Packet-optical networks must have an ability to maintain an acceptable level of service during network failures. Fast and resource optimized lightpath restoration strategies are urgent requirements for the near future Packet-optical networks with a Generalized Multi-Protocol Label Switching(GMPLS) control plane. The goal of this paper is to provide packet-optical network with a hierarchical multi-layer recovery in order to fast and coordinated restoration in packet-optical network/GMPLS, focusing on new implementation information. The proposed schemes do not need an extension of optical network signaling (routing) protocols for support.

Isolation and electrical characterization of the rat spinal dorsal horn neurons

  • Han, Seong-Kyu;Lee, Mun-Han;Ryu, Pan-Dong
    • Proceedings of the Korean Society of Applied Pharmacology
    • /
    • 1996.04a
    • /
    • pp.175-175
    • /
    • 1996
  • The spinal dorsal horn is the area where primary afferent fibers terminate and cutaneous sensory information is Processed. A number of putative neurotransmitter substances, including excitatory and inhibitory amino acids and peptides, are present in this region and sites and cellular mechanisms of their actions have been a target of numerous studies. In this study, single neurons were acutely isolated and the properties of whole cell current and responses to excitatory and inhibitory neurotransmitters were studied by the patch clamp method. Young rats (7-14 days) were anesthetized with diethyl-ether, and the lumbar spinal cord was excised and cut transversely at a thickness of 30$\mu\textrm{m}$ by Vibroslicer. The treatment of spinal slices with low concentration of proteases (pronase and thermolysin 0.75 mg/$m\ell$) and mechanical dissociation yielded isolated neurons with near intact morphology. Multipolar, ellipsoidal and bipolar, and pyramidal cells were shown. By applying step voltage pulses to neurons held at -70 mV, two types of inward currents and one outward currents observed. The fast activating and inactivating inward current was the Na$\^$+/ current because of its fast kinetics and blocking by 0.5${\mu}$M TTX, a specific blocker of Na$\^$+/ channel. The second type of inward currents were sustained. Based on their kinetics and current-voltage relations, it was likely that the second type of inward current was the voltage-dependent Ca$\^$2+/ current. In the presence of TTX, the steady-state currents mainly represented outward K$\^$+/ current which looked like the delayed rectifier K$\^$+/ current. In addition, the membrane currents produced by agonist of excitatory amino acid (EAA) receptor and the endogenous transmitter candidate L-glutamate were recorded in isolated whole-cell voltage clamped neurons as well as responses to inhibitory amino acids (${\gamma}$-amino butyric acid, glycine). Drugs were applied by a method that allows complete exchange of the solution within 1 sec; an infinite number of solutions can be applied to a single cell.

  • PDF

Access timing offsets-resilient SC-FDMA (접속동기 오차에 강한 SC-FDMA 기법)

  • Kim, Bong-Seok;Choi, Kwonhue
    • Journal of Satellite, Information and Communications
    • /
    • v.7 no.3
    • /
    • pp.26-29
    • /
    • 2012
  • In this paper, we propose a Single Carrier Frequency Division Multiple Access(SC-FDMA) scheme with greatly enhanced tolerance of timing offset among the users. The type of the proposed scheme is similar to code spread Multiple Carrier Direct Spread Code Division Multiple Access(MC DS CDMA). The proposed scheme performs partial Discrete Fourier Transform(DFT) in order to solve high Peak to Average Power Ratio(PAPR) of the MC DS CDMA before Inverse Fast Fourier Transform(IFFT). Exploiting the property Properly Scrambled Walsh-Hadamard(PSW) code has zero correlation despite ${\pm}1$ chip timing offset, the proposed scheme achieves Multiple Access Interference free performance with the timing offset up to ${\pm}1$ OFDM symbol duration with low PAPR. In contrast, the other existing schemes in comparison undergo severe performance degradation even with small timing offset in multipath fading channel.

SoC Design of Speaker Connection System by Efficient Cosimulation (효율적인 통합시뮬레이션에 의한 스피커 연결 시스템의 SoC 설계)

  • Song, Moon-Vin;Song, The-Hoon;Oh, Chae-Gon;Chung, Yun-Mo
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.43 no.10 s.352
    • /
    • pp.68-73
    • /
    • 2006
  • This, paper proposes a cosimulation methodology that results in an efficient SoC design as well as fast verification by integrating HDL, SystemC, and algorithm-level abstraction using the design tools Active-HDL and Matlab's Simulink. To demonstrate the proposed design methodology, we implemented the design technique on a serial connection multi-channel speaker system. We have demonstrated the proposed cosimulation method utilizing an ARM processor based SoC Master board with the AMBA bus interface and a Xilinx Vertex4 FPGA. The proposed method has the advantage of simultaneous simulation verification of both software and hardware parts in high levels of abstraction mixed with some performance critical parts in more concrete RTL codes. This allows relatively fast and easy design of a speaker connection system which typically requires significant amount of data processing for verification.

A Performance Comparison of CR-MMA and FC-MMA Adaptive Equalization Algorithm in 2 dimensional QAM Signal (2차원 QAM 신호에서 CR-MMA와 FC-MMA 적응 등화 알고리즘의 성능 비교)

  • Lim, Seung-Gag
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.18 no.1
    • /
    • pp.85-90
    • /
    • 2018
  • This paper compares the equalization algorithm of CR-MMA (Constellation Reduction-Multi Modulus Algorithm) and FC-MMA (Fast Convergence-Multi Modulus Algorithm) for the compensation of channel's distortion in transmitting the 2 dimensional 16-QAM signals. The CR-MMA adaptive equalizer use the error signal by reduce the nonconstant modulus signal to constant modulus signal in order to updates the tap coefficient, and the FC-MMA adptive equalizer use the error signal applying the modified dispersion constant considering the number of symbol level instead of signal point reduction. These two algorithm are known to its superior to the convergence characteristic among the MMA series equalizer. In this paper, the other equalization performance including the convergence characteristic was compared by computer simulation. As a result of computer simulation, FC-MMA has more good performance in the residual isi, maximum distortion and SER performance than CR-MMA, but not in convergence speed.

Performance Evaluation of FC-MMA and RMMA Algorithm for Adaptive Equalization in 2-dimensional QAM Signals (2차원 QAM 신호에서 적응 등화를 위한 FC-MMA와 RMMA 알고리즘의 성능 평가)

  • Lim, Seung-Gag;Kang, Dae-Soo
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.16 no.5
    • /
    • pp.91-97
    • /
    • 2016
  • This paper evaluates the equalization algorithm of FC-MMA (Fast Convergence-Multi Modulus Algorithm) and RMMA (Region based Multi Modulus Algorithm) for the compensation of intersymbol interference which is due to the distortion of communication channel. In order to obtain the error signal for adaptive equalization, the FC-MMA use the modified dispersion constant considering the number of signal symbol, the RMMA separates the 4 region which every symbol points are located, then reduce the symbol point based on this region into constant modulus symbol point. By applying the different principle in order to get the error signal for the updating the tap coefficient of adaptive equalizer, it has the different equalization performance by these error signal. The computer simulation was performed in order to compare the different equalization performance in this paper. The performance index includes the output signal constellation, the residual isi and maximum distortion that is for the convergence characteristics, the SER. As a result of computer simulation, RMMA has more good performance in the residual isi, maximum distortion after in steady state and SER performance than FC-MMA, but not in convergence speed to reach the steady state.

Design and Implementation of the Performance Driven UI-Mashup Architecture (성능 주도의 UI-Mashup 아키텍처의 설계 및 구현)

  • Cho, Dong-Il
    • Journal of Internet Computing and Services
    • /
    • v.15 no.1
    • /
    • pp.45-53
    • /
    • 2014
  • UI-Mashup is widely used as a service method to add value, which is composed of distributed various contents on the internet and has turned out to be one of the latest trends in web application program development. Previous UI-Mashup-related studies have focused primarily on the dynamic service composition and have not been able to adapt to a rapidly changing Web Standard, thusthe end users conclude that UI-Mashups are slow, incompatible and poor security services. In this study, We propose an architecture for the performance improvements of UI-Mashup.In order to provide fast services and security enhancements, the proposed architecture collects UI fragments on the server in parallel, and sends layouts and contents of Mashups UI to the client through a special delivery channel supporting fast reaction and response time. In this study, the implementation and performance tests were proceeded to verify the proposed architecture experimentally. As a result of the performance testing, the proposed architecture has two to three times faster response time and more than four times throughput compared to the previous UI-Mashup technology.

The Fast Correlative Vector Direction Finder Conversion (직접 변환을 이용한 고속 상관형 벡터 방향탐지기)

  • Park, Cheol-Sun;Kim, Dae-Young
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.43 no.12 s.354
    • /
    • pp.16-23
    • /
    • 2006
  • This paper presents the development of the fast Direction Finder using direct conversion method, which can intercept for short pulse signal of less' than 1 msec. in RF Down Converter, and CVDF(Correlative Vector Direction Finding) algorithm, which estimates DoA (Direction of Arrival). The configuration and characteristics of direction finder using 5-channel equi-spaced circular array antenna are presented and the direct conversion techniques for removing tuning time using I/Q demodulator are described. The CRLB of our model is derived, the principles of 2 kind of CVDF algorithm are explained and their characteristics are compared with CRLB w.r.t the number of samples and spacing ratio. The RF Down Converter prototype using direct conversion method is manufactured, the 2 kind of CVDF algorithm are applied and their performance are analyzed. Finally it is confirmed the LSE based CVDF algorithm is better than correlation-coefficient based except for ambiguity protection capabilities.

UHD Video Stitching Method for Enhanced User Experience (사용자 경험을 극대화한 UHD 영상 합성 기술)

  • Gankhuyag, Ganzorig;Hong, Eun Gi;Kim, Giyeol;Choe, Yoonsik
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.40 no.7
    • /
    • pp.1387-1394
    • /
    • 2015
  • Along with the development of network transmission technology, the IPTV market is growing in fast pace. Additionally the UHD resolution broadcasting system along with user experience (UX) that provides better service to user has attracted attention recently since there are not enough research has been done with differentiated the UX that can enhance the UX yet. Therefore we proposed a low complexity syntax level image stitching implementation technique that run with multi-view services, which makes possibility to view multiple channel or video contents on the screen at the same time. Simulation results have demonstrated the liability and effectiveness of the proposed algorithm by showing that capability of generating more than 80 frames per second by stitching four Full-HD size videos into UHD frame.

Single Outlier Removal Technology for TWR based High Precision Localization (TWR 기반 고정밀 측위를 위한 단일 이상측정치 제거 기술)

  • Lee, Chang-Eun;Sung, Tae-Kyung
    • The Journal of Korea Robotics Society
    • /
    • v.12 no.3
    • /
    • pp.350-355
    • /
    • 2017
  • UWB (Ultra Wide Band) refers to a system with a bandwidth of over 500 MHz or a bandwidth of 20% of the center frequency. It is robust against channel fading and has a wide signal bandwidth. Using the IR-UWB based ranging system, it is possible to obtain decimeter-level ranging accuracy. Furthermore, IR-UWB system enables acquisition over glass or cement with high resolution. In recent years, IR-UWB-based ranging chipsets have become cheap and popular, and it has become possible to implement positioning systems of several tens of centimeters. The system can be configured as one-way ranging (OWR) positioning system for fast ranging and TWR (two-way ranging) positioning system for cheap and robust ranging. On the other hand, the ranging based positioning system has a limitation on the number of terminals for localization because it takes time to perform a communication procedure to perform ranging. To overcome this problem, code multiplexing and channel multiplexing are performed. However, errors occur in measurement due to interference between channels and code, multipath, and so on. The measurement filtering is used to reduce the measurement error, but more fundamentally, techniques for removing these measurements should be studied. First, the TWR based positioning was analyzed from a stochastic point of view and the effects of outlier measurements were summarized. The positioning algorithm for analytically identifying and removing single outlier is summarized and extended to three dimensions. Through the simulation, we have verified the algorithm to detect and remove single outliers.