• Korean Journal of Veterinary Research
• /
• v.17 no.1
• /
• pp.17-26
• /
• 1977

Parasites of wild animals are closely related with parasites of domestic animals. Wild animals take charge of an important role at parasitic infestation of domestic animals because of unrestrained movement. The authors carried out the work of actual condition of parasitic infestation on wild animals, total 1,014 cases, in the Korean Zoo. The results are summarized as follows: 1. Total rate of parasitic infestation was 36.1% with infestation of 366 among 1,014 cases. The rate of single infestation was 32.6% with infestation of 331 cases, double infestation 3.1% with 31 cases, triple infestation 0.2% with 2 cases and quadrople infestation 0.2% with 2 cases. 2. The parasites on the zoo animals were identified as follows: Lion: Sarcoptiform, Toxocara sp., Toxascaris leonina, Ancylostoma sp. and Isospora spp. Puma: Toxocara sp., Ancylostoma sp. and Isospora sp. Leopard: Toxocara spp., Ancylostoma sp., Trichuris sp., Dibothriocephalus sp. and Physaloptera sp. Wolf: Sarcoptiform and Dibothriocephalus spp. Fox: Trichuris sp., Capillaria aerophila, Spirocerca sp., Paragonimas kellicotti. Jackal: Sarcoptiform, Ascaris sp. and Echinococcus granulosus. Wild Cat: Dibothriocephalus sp. Tiger: Toxascaris leonina. Bear: Sarcoptiform, Metastrongylus apri, Ancylostoma sp. and Ascaris sp. Raccoon and Raccoon dog: Sarcoptiform, Paragonimus kelliotti, and Isospora sp. Boar: Oesophagostomum spp. and Eimeria spp. Mortkey: Sarcoptiform, Trichuris sp., Physaloptera spp.. Enterobius sp. and Isospora sp. Elephant: Sarcoptiform, Strongyloides sp. and Strongylus spp. Deer: Sarcoptiform, Strongyloides sp., Trichuris ovis, Mccistocirrus digitatus, Haemonchus sp., Oesophagostomum radiatum, Paramphistornum spp., Bunostomum phlebotomum, Fasciola hepatica and Eimeria spp. Bison: Sarcoptiform, Haernonchus sp., Marshallagia sp., Nematodirus sp. and Eimeria sp. Zebra: Strongylus sp. and Parascaris equorum. Goral and Barbary: Sarcoptiform, Haemonchus sp., Oesophagostomum venulosum, Moniezia sp. and Eimeria spp. Lama: Strongyloides sp. and Haemonchus sp. Kangaroo: Strongyloides sp. and Haemonchus sp. Camel: Strongyloides sp., Trichuris ovis and Eimeria sp. Peacock and the Other Birds: Sarcoptiform, Capillaria contorta, Capillaria caudinflata, Ascaridia spp., Heterakis spp., Hymenolepis sp., Eimeria spp., Histomonas, Ornithionyssus bacoti, Macrochelidae and Trichomonas. 3. Among the zoo animals, wild carnivora were infestated with the parasites which are common parasites of dogs and cats, wild herbivora were infestated with the parasites of herbivora domestic animals. and wild fowls were infestated with the parasites of domestic fowls.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.4
• /
• pp.423-432
• /
• 2017

Objectives: This study was conducted to evaluate asbestos handling history of workers at automobile manufacturing plants in Korea. Methods: National regulations on asbestos and Korea Occupational Safety and Health Agency(KOSHA) database on the information of asbestos containing products were reviewed. We investigated asbestos related materials from one automobile manufacturing plant. Material safety data sheets(MSDS) collected in 2010, work environment monitoring results reported from 2000 to 2013, trade union reports and asbestos survey reports were reviewed. We also interviewed workers with long career and did walk-through survey. Results: The Ministry of Labor in Korea has permitted asbestos manufacturing since 1990. In 1997, the use of crocidolite and amosite asbestos were banned. In 2007, the Korean government announced a total ban on the manufacturing, importation and use of all kinds of asbestos, which took full effect in 2009. A total of 174 asbestos products information from KOSHA database was analyzed. Extruded cement panel for building, special brake for crane farm machinery, gasket, joint sheet and thermal insulator were produced until 2007. From automobile manufacturing plant survey, we confirmed that asbestos containing materials(ACM) such as gasket, heating induction materials have been used until 2011. Asbestos containing building materials(ACBM) such as bamlites, slate and ceiling tex were reported at 122 asbestos dismantling projects in 2014. Conclusion: Although the use of all kinds of asbestos were banned from 2009, ACMs and ACBMs installed before 2009 were still found at automobile manufacturing plant until 2011 and 2014 respectively. In particular, asbestos slates should be managed because most of slates had not been removed until 2014.

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.223-227
• /
• 2013

Purpose: The objectives of this study were to develop a general purpose baler system that is appropriate for the domestic forage cultivation environment and operated by the medium size tractor for production of bale silage made of green forage crops, and to test its performance. Methods: In a first experiment, the time of formation per one bale and densities of bales that are produced from bale system, were measured. In a second experiment, power requirement was measured by a power measurement system manufactured during bale system work. Results: The power measurement system was constructed with strain-gage sensors to measure torque of a PTO axle and proximity sensor to measure rotating speed of a PTO axle. Thus, the power requirement was calculated by PTO torque and PTO rotating speed. For evaluation of bale quality, the samples of bales were analyzed for contents of moisture, ADF, NDF and TDN. Conclusions: If the results of this study will be utilized, the coefficient of utilization of agricultural machinery will be increased by the operation of a medium size tractor that is a major disseminated tractor in farm, and it will contribute tremendously to make a forage production base for livestock farms.

• Journal of Biosystems Engineering
• /
• v.42 no.2
• /
• pp.75-79
• /
• 2017

The use of tractors to carry out agricultural work has played an important role in mechanizing the agricultural sector. A repairable mechanical system (such as an agricultural tractor) is subject to deterioration or failure. In this study, a regression model was used to predict the failure rate of a John Deere 3140 tractor. The machine failure pattern was carefully studied, and key factors affecting the failure rate were identified in five regions of the Khouzestan province. Through a questionnaire, data was obtained from farm records. This data was grouped into six sub-groups, according to the annual use hours (AUH) and the manner in which the tractors were stored. Results showed that AUH and storage policies affected failure rate slightly. With an increase in the age of the tractors, the failure rate in the tractors used for 1050-2000 hours annually and stored outdoors was higher than those used for 200-1000 hours annually and stored in sheds. When the tractors were of the same age, the slope of the curve in the 200-1000 annual use hours increased gradually and then rapidly, but failure rate in the 1050-2000 annual use hours was high from the beginning, and subsequent increase in this value was almost uniform. As a result, it can be said that with an increase in the annual use hours, the failure and breakdown rate in John Deere 3140 tractors rapidly increases, but maintenance conditions only slightly affect the failure and breakdown rate.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.27-35
• /
• 2007

The majority of farm managers growing the garden products in greenhouse concern massively about the diagnosis and prevention of the breeding and extermination for pests. especially, the managing problem for pests turns up as main issue. In the paper, we first build a wireless sensor network with soil and environment sensors such as illumination, temperature and humidity. And then we design and implement multimedia pest predication and management system which is able to predict and manage various pest of garden products in greenhouse. The proposed system can support the database with information about the pests by building up wireless sensor network in greenhouse compared with existing high-priced PLC device as well as collect various environment information from soil, the interior of greenhouse, and the exterior of greenhouse. To verify the good capability of our system, we implemented several GUI interface corresponding desktop. web, and PDA mobile platform based on real greenhouse model. Finally, we can confirm that our system work well prediction and management of pest of garden products in greenhouse based on several platforms.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.1 no.1
• /
• pp.22-30
• /
• 2020

Many areas of vegetation in the British uplands have reduced species diversity as a result of sheep overgrazing. It has been suggested that abandonment or re-wilding strategies might be used to reverse this. A likely first step would be the removal or reduction of grazing livestock from upland areas, with a presumption that this would lead to a recovery in species richness. However, we do not know if this would work, or the timescales involved. One of the important areas where more knowledge is needed is information on the size and composition of soil seedbanks as regeneration from zseed is a likely pathway of recovery. Here, we compared seedbanks in both grazed and ungrazed plots in five experiments at Moor House NNR in the northern Pennines; these sheep grazing exclusion experiments were started 52 and 63/64 years ago. Soil samples (n=10) were collected from both grazed and ungrazed plots in each experiment, and seed emergence counted in glasshouse trials. We detected only seeds of common species and very few dicotyledonous species. This suggests that the soil seedbank is unlikely to be a reliable source of the less common species for ecological restoration in these upland communities, suggesting an extinction debt. Therefore, seed addition and the creation of suitable safe-sites for germination may be needed in conjunction with grazing controls to allow the establishment of plants that will increase the species richness of the vegetation. However, this interventionist restoration approach remains to be tested.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.6
• /
• pp.51-63
• /
• 1996

This study is about the problems found in the process of the current governments planning rural settlement area development. As a measure to solve them, It proposed the analysis method of village characteristic in terms of standard score and tried to use this method as a basic material in planning more effective rural settlement area development. On the basis of the above analysis, which is an objective basic material to solve the problems revealed in the process of the bottom-up development planning by the residents' demands, It shows the following conclusion about what method should be applied to each part according to a village's characteristics and its development level. 1. Accessibility can be a basic material for setting the local area, analyzing its settlement system, and them such development facilities as village-linking roads, rural road, or various kinds of bridges and determining the investment priority. 2. With the index of the industrial basis, we can see what village has plenty of social, economical resources including advanced industrial facilities and looking into the advance level of the industrial basis, we can get some information about determining the local area development direction such as estashing the plan to build a farm product gathering center, a collective work place, storage facilities, and special housing development. 3. Since the issue about living environment is raising it's head, compared to weakened agricultural competitive power, with the analysis of this living environment, we can get an objective basic material for solving problems caused by the local egoism and the effective investment strategy of the limited resources. Therefore, It is necessary that we should abstain from expert-centered planning and formal public opinion-collecting and on the basis of this analytic result, we should plan development. We need to continue our research about index selecting and differentiation, weight etc. and using these analysis methods, we should make up a systematic development plan by analyzing village characteristics and setting the development direction.

• Journal of Agricultural Extension & Community Development
• /
• v.23 no.3
• /
• pp.285-293
• /
• 2016

The increase in demand for leisure time by the public and the vitalization of agricultural tourism resulting from the expansion of the five-day work week are expected to greatly contribute to the rural economy, but actual studies analyzing the ripple effect of the agricultural tourism industry are lacking. In order to analyze the economic ripple effect, tourism or agricultural tourism must become an independent sector in the inter-industry relations table's sector classification, but because it is not, the study uses a method of analysis which involves creating a satellite account. However, because agricultural tourism has a clear main agent in farms unlike general tourism which does not, there is one method in which provisions are made by farms or farm villages and another method in which outside products are used. The purpose of the present is to measure the economic ripple effect of agricultural tourism with a focus on 162 subclasses by applying positive data from the education sector input into agricultural tourism. Satellite accounts which considered intermediate input were created and applied to positive data, the analysis of which revealed agricultural tourism to account for 462 billion won, which is 0.01% of the total production amount of 3,503,480 billion won, while the production inducement coefficient was 3.2895 units when the final demand of agricultural tourism occurs. When the production inducement coefficient is at 3.2895 units, highest sector was agricultural tourism at 0.9968 units followed by restaurants and bars at 0.3325 units, roadt transportation services at 0.3183 units, lodging services at 0.1520 units, and petroleum products at 0.1290 units.

• Ocean Systems Engineering
• /
• v.7 no.2
• /
• pp.143-155
• /
• 2017

For complex flexible structures such as nets, the determination of drag forces and its deformation is a challenging task. The accurate prediction of loads on cages is one of the key steps in designing fish farm facilities. The basic physics with a simple cage, can be addressed by the use of experimental studies. However, to design more complex cage system for various environmental conditions, a reliable numerical simulation tool is essential. In this work, the current load on a cage is calculated using a Morison-force model applied at instantaneous positions of equivalent-net modeling. Variations of solidity ratio ($S_n$) of the net and current speed are considered. An equivalent array of cylinders is built to represent the physical netting. Based on the systematic comparisons between the published experimental data for Raschel nets and the current numerical simulations, carried out using the commercial software OrcaFlex, a new formulation for $C_d$ values, used in the equivalent-net model, is presented. The similar approach can also be applied to other netting materials following the same procedure. In case of high solidity ratio and current speed, the hybrid model defines $C_d$ as a function of Re (Reynolds number) and $S_n$ to better represent the corresponding weak diffraction effects. Otherwise, the conventional $C_d$ values depending only on Re can be used with including shielding effects for downstream elements. This new methodology significantly improves the agreement between numerical and experimental data.

• Wind and Structures
• /
• v.15 no.1
• /
• pp.17-26
• /
• 2012

Modeling swirling wakes is of considerable interest to wind farm designers. The present work is an attempt to develop a computational tool to understand free, far-wake development behind a single rotating wind turbine. Besides the standard momentum and continuity equations from the boundary layer theory in two dimensions, an additional equation for the conservation of angular momentum is introduced to study axisymmetric swirl effects on wake growth. Turbulence is simulated with two options: the standard ${\kappa}-{\varepsilon}$ model and the Reynolds Stress transport model. A finite volume method is used to discretize the governing equations for mean flow and turbulence quantities. A marching algorithm of expanding grids is employed to enclose the growing far-wake and to solve the equations implicitly at every axial step. Axisymmetric far-wakes with/without swirl are studied at different Reynolds numbers and swirl numbers. Wake characteristics such as wake width, half radius, velocity profiles and pressure profiles are computed. Compared with the results obtained under similar flow conditions using the computational software, FLUENT, this far-wake model shows simplicity with acceptable accuracy, covering large wake regions in far-wake study.