• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.5
• /
• pp.95-100
• /
• 2009

The water purification systems have been hardly used for agricultural purpose due to their complicated compositions and high costs for farmers, while only simple filtrations have been applied to irrigation systems in order to prevent the system from clogging problems. This study therefore developed a clean water supplying system, the Filter-Disinfection-Adsorption (FDA) system, especially for greenhouse cultivation of where low quality of water is available. This system has also been produced for providing convenience water to farmers in the areas of no water supply service systems for the purpose of washing their bodies or agricultural machineries after farm work. The FDA system consists of three stages of purification processes with an integral module, including disk and teflon filtrations and Ultraviolet (UV) sterilization processes. Indoor experiments were undertaken with a trial product of the FDA system to test its performance. The operation test of the process was performed as well as the condition check of each item including UV module, filters, control panel, pump, valves, etc. The results shows good performance of each test with no critical problems. The initial and maintenance costs were also analysed with other purification systems. From the comparisons, the FDA system found to be very economical and easy to use.

• Korean Journal of Computational Design and Engineering
• /
• v.6 no.1
• /
• pp.31-39
• /
• 2001

Presented in this paper are algorithms to compute the positions of vertices and equations of edges of the Voronoi diagram of a circle set. The circles are located in a Euclidean plane, the radii of the circles are not necessarily equal and the circles are not necessarily disjoint. The algorithms correctly and efficiently work when the correct topology of the Voronoi diagram was given. Given three circle generators, the position of the Voronoi vertex is computed by treating the plane as a complex plane, the Z-plane, and transforming it into another complex plane, the W-plane, via the Mobius transformation. Then, the problem is formulated as a simple point location problem in regions defined by two lines and two circles in the W-plane. And the center of the inverse-transformed circle in Z-plane from the line in the W-plane becomes the position of the Voronoi vertex. After the correct topology is constructed with the geometry of the vertices, the equations of edge are computed in a rational quadratic Bezier curve farm.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.3
• /
• pp.369-376
• /
• 2014

Recent climate change and ensure each country's marine fisheries resources due to the sharp decline to address the eco-friendly farming has emerged. Marine aquaculture operations to provide ease of use for the fishing ship cranes. In this paper, we use the default handler for the shipping cranes and improve the working environment of the received video equipment in the work area through the monitoring and analysis of visual information to optimize the image, convenient and high visibility for workers to have real-time video guide system is proposed.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1110-1116
• /
• 1993

A study on optimum operation performances of power efficiency, economy and exhaust emissions for a tractor was conducted. A mathematical model of multiple degree polynomial equation was applied to established the function of solid multiple parameter curves for specific fuel consumption (ge), cabon monoxide (CO) ,hydrcarbons (HC) and cabonaceous smoke (Rb). The optimum operation theorems for economy operation indicated by ge and for exhaust emissions described by Co , HC and Rb were obtained from analytical method and performance test data. The optimum operation theorems could exhibit optimum operation working points, curves, and regions. The optimum matching relations of engine speed and transmission parameters were analyzed by using computer simulation methods in accordance with the tractor specifications , actual farm working conditions in a typical drawbar pull work such as plowing , the optimum operation objective function, the ideal transmission ratio, practical gear shif ing positions and practical travel speed of the tractor TN55 medel. The results of the anlayzes indicated clearly that the optimum power efficient operation, energy saving and pollution reducing would be realized if the tractor would be operated according to theoptimum operation methods.

• Analytical Science and Technology
• /
• v.26 no.1
• /
• pp.1-10
• /
• 2013

It was known that many beekeepers use some acaricides to protect their bees. Among the acaricides used in bees, amitraz, bromopropylate, coumaphos, and cymiazole were used commonly in Korea. In middle of 2006, Korean government set maximum residual limit (MRL) of amitraz and coumaphos as 0.2 ppm and 0.1 ppm, respectively. Because the environment of bee farm changes every year, it is needed to monitor acaricides in honey continuously. In this work, ten samples of honey collected from local markets and internet in 2011 were tested for determination of the amount of amitraz, bromopropylate, coumaphos and cymiazole by HPLC-DAD. Levels of the acaricide residues found were less than 25 ppb.

• Journal of Internet of Things and Convergence
• /
• v.2 no.3
• /
• pp.31-35
• /
• 2016

IoT technologies have been rapidly developed in recent years, and applied to many industries. In the field of fisheries, the water quality management system have been developed, helping in improving productivity and working environment. In this paper, we have designed the smart feeding system, interoperable with the water quality system, using LPWA network. LPWA network is an IoT network, which is appropriate to fish farms because of its wide area coverages and low power consumption. We expect this work to contribute to developing the aquaculture technology through the big data analysis with the accumulated data.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.10
• /
• pp.91-98
• /
• 2016

Outbreaks of highly contagious livestock diseases can cause direct and indirect economic impacts such as lower productivity of cattle farms, fall in tourism in damaged areas and countries, and decline in exports. They also incur tremendous social costs associated with disease elimination and restoration work. Thus, it is essential to prevent livestock diseases through monitoring and prediction efforts. Currently, however, it is still difficult to provide accurate predictive information regarding occurrences of livestock diseases, because existing cattle health monitoring or forecasting systems are only limited to monitor environmental conditions of livestock barns and check activities of cattle by using a pedometer or thermal image. In this paper, we present a biosensor-based cattle health monitoring system capable of collecting bio-signals of farm animals in an effective way. For the presented monitoring system, we design an integrated monitoring device consisting of a sensing module to measure bio-signals of cattle such as the heartbeat, the breath rate and the momentum, as well as a Zigbee module designed to transmit the biometric data based on Wireless Sensor Network (WSN). We verify the validity of the monitoring system by the comparison of the correlations of designed device with a commercial ECG equipment through analyzing the R-peak of measured signals.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.2
• /
• pp.220-225
• /
• 2000

A general household survey was carried out in the village of Sonoageng in East Java, Indonesia with the aim to assess their socio-economic status, and the crop and livestock production system prevailing in the area. Of the households interviewed (164), 52% are landless, 35% own land or have a combination of own and shared land, and 12% do not own land but have access to land by sharing. Nearly two thirds (65%) of the households raise cattle; most of them own animals, 8% reared shared animals only. The dominant crop was rice; other crops grown were soya bean, groundnut, maize and sugar cane. Nearly half (47%) the household income was derived from off-farm work (non-agricultural activities), 33% from crops, 13% from livestock (mainly cattle), and 7% from agricultural labour. Most households kept 1 to 2 animals and only 21 out of 164 households earned more than Rp. 500,000 (~250 US$) per annum from livestock. The most prevalent type of livestock production in the area could be characterized as small-scale cow/calf operation, either by landless households or those with <0.4 ha of land.

• 한국환경농학회:학술대회논문집
• /
• 2009.07a
• /
• pp.240-272
• /
• 2009

Recently, as Foot and Mouth disease(FMD) outbreaks in South-East Asia, Taiwan, China, we cannot loose our tense to sustain our FMD free country status. And we have increasing possibility of disease inflow because of continual outbreaks of FMD type A, O and Asia 1 in neighbored countries, foreign visitor and foreign workers. So we have to be urgently ready for strengthen surveillance, early-report and early-diagnosis. So the most important things in epidemic control of livestock are co-work between central and local epidemic control office and field epidemic control. However, potential risk for FMD recurrence and sporadic occurrence of epidemic disease still threaten our livestock farmhouse, so we have to be ready for bio-security against these threatening. For these reasons, I will introduce the concept, etiology and epidemiology of disease and investment/ analysis of health management standard of main animals like cattle and pig which is applied to the inside and outside of country. With these references, we have to manage livestock health management thoroughly by establishing livestock health management standard and notifying special veterinarian and livestock farmer of these standard. Later on, prevention and quarantine of epidemic outbreak and establishing livestock health management standard should be undertaken primarily for sustainable growth and stability of livestock farm industry.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.1
• /
• pp.71-81
• /
• 2020

Enclosed pig house are creating an environment with high concentrations of gas and dust. Poor conditions in pig farms reduce pig weight and increase disease and accidents for livestock workers. In the pig house, the high concentration of harmful gas may cause asphyxiation accidents to workers and chronic respiratory disease by long-term exposure. As pig farm workers have been aging and feminized, the damage to the health of the harsh environment is getting serious, and real-time monitoring is needed to prevent the damage. However, most of the measuring devices related to humidity, harmful gas, and fine dust except temperature sensors are exposed to high concentrations of gas and dust inside pig house and are difficult to withstand for a long time. The purpose of this study is to develop an wearable based device to monitor the hazardous environment exposed to workers working in pig farms. Based on the field monitoring and previous researches, the measurement range and basic specifications of the equipment were selected, and wearable based device was designed in terms of utilization, economic efficiency, size and communication performance. Selected H₂S and NH₃ sensors showed the average error of 5.3% comparing to standard gas concentrations. The measured data can be used to manage the working environment according to the worker's location and to obtain basic data for work safety warning.