• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.34-40
• /
• 2016

In ventilated seats for cars, air flow is generated by a fan and passed through a foam pad, foam filter, and seat cover. There is a significant loss of air flow in this process, and it is not easy to analyze the amount delivered to the driver. Another difficulty is the geometric complexity of the air flow passage inside the seats. In this paper, the air flow through a foam pad was analyzed. Proper modeling of the bumps in the ventilation mat was found to be important in the analysis. Air flow is lost when it passes through the porous pad foam, which was measured and used to correct the analysis results. The corrected analysis results were in a good agreement with the experimental results. The amount of air flow delivered to a driver was measured using an airflow cone. Only 35.7% of the air flow from the fan was delivered.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.609-615
• /
• 2001

A turbo-fan is easily exposed to noise and vibration as against other industrial machines and the majority of them is subject to be damaged by vibration. The most usual problem of vibration in a turbo-fan is resonance so the case of being composed of iron sheet structure with low strength like a turbo-fan should be taken seriously. In this paper, FFT(Fast Fourier Transform) and Order tracking method were used to analyze factors of vibration in a turbo-fan and hereby with proper selection of vibration isolator, we wanted to reduce vibration of base. After Order tracking, we knew resonance occurred in rotational frequency 23 Hz(1400 rpm) at the casing and the bearing. After the test of base vibration using vibration isolators, the spring isolator was more effective than the robber isolator in the base vibration and the vibration isolating is more effective in the case that the isolating pad is adhered to the bottom of the isolating spring.

• Journal of Bio-Environment Control
• /
• v.9 no.1
• /
• pp.60-64
• /
• 2000

This study was conducted to investigate effects of cooling methods on the growth and yield of tomato cv. momotaro in the glasshouse for four years from 1996 to 1999. Cooling methods were fan, fan and fogging, fan and shading(temp. control), fan and shading(radiation control), fan and shading (temp. control) with fogging. Fan, Fogging and Shading(temp. control) were operated automatically when air temperature was over 3$0^{\circ}C$. Amount of fogging was 500m1/min/100m$^2$and Droplets in a fog were 50 microns or smaller. Shading(radiation control) was operated automatically when solar radiation was over 500W/m$^2$. The growth and yield were the least in fan and shading(temp. control) method due to lack of light Intensity. Fogging method must be reconsidered for expensive equipment and maintenance expenses. As the matter stands, It is suggested to be the most considerable cooling method to increase ventilation rate with fan or use fan and shading(radiation control).

• Journal of Bio-Environment Control
• /
• v.9 no.4
• /
• pp.201-206
• /
• 2000

A certain system to overcome high temperature should be introduced for the stable year-round cultivation in greenhouses. There are efficient methods to overcome high temperature such as ventilation system with shading screen, fan and pad system with screen, and fog system with screen. This study was carried out to find a means to determine the capacity of such system. Heat balance equations for each system were established and verified by experimental results. The calculated ventilation rates from heat balance equations showed a good agreement with the measured ones. The evapotranspiration coefficient was the most important parameter affecting the ventilation requirement among input parameter affecting the ventilation requirement among input parameters except weather data. When the evaportanspiration coefficient increased 1%, the ventilation requirement decreased 1.3%. Therefore the data of evapotranspiration coefficient should be accumulated by various experiments, and then design standards and selection guidelines should be provided. The simulation results for same design conditions shown that air exchanges requirement and evaporating water of fan and pad system were 5.1∼7.7% and 6.8∼9.3% larger than those of fog system, respectively.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.09a
• /
• pp.219-225
• /
• 2002

This paper presents a novel "bumpless flip chip package"for cost! performance driven devices. Using the conventional electroplating and etching processes, this package enables the production of fine pitch BGA up to 256 I/O with single layer routing. An array of circuitry down to $25-50{\mu}{\textrm}{m}$ line/space is fabricated to fan-in and fan-out of the bond pads without using bumps or substrate. Various types of joint methods can be applied to connect the fine trace and the bond pad directly. The resin-filled terminal provides excellent compliancy between package and the assembled board. More interestingly, the thin film routing is similar to wafer level packaging whereas the fan-out feature enables high lead count devices to be accommodated in the BGA format. Details of the design concepts and processing technology for this novel package are discussed. Trade offs to meet various cost or performance goals for selected applications are suggested. Finally, the importance of design integration early in the technology development cycle with die-level and system-level design teams is highlighted as critical to an optimal design for performance and cost.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1999.11a
• /
• pp.209-212
• /
• 1999

여름철 재배시설의 기본적인 온도상승 억제방법은 차광과 환기이지만 이 방법만으로는 작물의 적정 생육온도에 접근하기 어렵기 때문에 추가적인 냉방 장치가 도입되고 있다. 현재 온실의 냉방시스템은 물의 증발잠열을 이용한 Pad and Fan 방식과 Fog 방식의 냉방시스템이 보급되어 있으나, 국내의 지역기상조건을 감안한 연구가 충분히 이루어지지 못하여 냉방시스템의 설치와 운영에 대한 기준이 명확하지 못한 실정이다. 따라서, 본 연구에서는 현장 실험을 통하여 기초적인 자료를 수집하였다.

• Journal of Bio-Environment Control
• /
• v.11 no.2
• /
• pp.81-87
• /
• 2002

This study was conducted to investigate the cooling efficiency and growth of tomatoes by root zone cooling device using a pad-box and cultivated system. The structure of the root zone cooling system using a pad-box was four piece of pads bonded an the side and a fan set at the bottom. Cool wind was generated by the outside air which was punched at intervals of 10 cm along three rows. Cold wind flowed to the root zone in the culture medium. The root zone cooling efficiency of cold wind generation by using a pad-box flowing through a wet-pad was determined. Major characteristic of this cuttural system consist of bed filled with a perlite medium and a ventilation pipe using PVC. The cold wind generation by a pad box (CWP) was compared to that of cold wind generation by a radiator (CWR), cold water circulation using a XL-pipe (CWX) and the control (non-cooling). When the temperature of water supplied was 16.2-18.4$^{\circ}C$, temperatures in the medium were 20.5~23.2$^{\circ}C$ for CWP 22.7~24.2$^{\circ}C$ for CWR, 22.8~24.27$^{\circ}C$ for CWX and 23.1~-29.6$^{\circ}C$ for the control. The results show that the cold wind temperature using the pad-box was lower by 1~2$^{\circ}C$ than that of cold water circulation in the XL-pipe and lower by 5~6$^{\circ}C$ than that of the control. Growth such as leaf length, leaf width, fresh weight and dry weight, was greater in three root zone cooling methods than in the control. Root activity was higher in the rat zone cooling methods than in the control. However, there was no significant difference among root zone cooling methods.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.4
• /
• pp.635-642
• /
• 2013

We have prepared a DEMO conveyor device for conveying a large 8G class glass sheet using ahorizontal air-cushion system. This device consists of the body frame and the driving frame that are combined to realize a frame for conveying glass without any contact.The driving frame comprises an air flotation table (bed), drive roller supported at both ends, and ASU. Part of the ASU serves to control the airflow as the chamber consists of a porous pad and fan. Fiber filters replace the porous pad and axial fans serve as an air compressor. In addition, to determine the appropriate glass levitation from the air table, this study examined the design specifications of the applied filter (discharge speed of HEPA and ULPA filters, and flow rate) as well as the height of the and the proper supporting roller height (14mm). Then, after adjusting the position of the ASU and the number of ASUs required to configure the UNIT air floating C/V, we analyzed the height and flatness of the glass and derived the appropriate layout (1140-mm distance between ASUs).

• Journal of Practical Agriculture & Fisheries Research
• /
• v.11 no.1
• /
• pp.183-195
• /
• 2009

시설하우스의 공기환경은 작물생육에 큰 영향을 준다. 특히 기공주변 공기의 상대습도는 증산작용에 크게 영향을 주며, 안개가 끼게 되면 기공을 통한 증산작용이 일어나지 않아 작물은 생육을 멈추게 된다. 이에 대한 이론적 고찰을 습공기선도를 중심으로 살펴보았으며, 그 기술을 권왕림(경기도 이천시 백사면 모전2리 192) 쌈채소 재배 농장과 정기설(경기도 용인시 백암면 석천리) 백암육계 농장에 적용한 결과를 요약하면 다음과 같다. 1. 여름철 온실 공기의 온도를 낮추기 위하여 널리 사용하는 Pad & Fan, Mist & Fan 등의 증발냉각 방법은 사막 기후지역(온도는 높고 습도는 낮은 지역)에 적합한 방법으로 우리나라와 같이 고온 다습한 기후에는 적합하지 않다. 2. 겨울철 저녁에 온실을 보온하기 전에 따뜻한 공기의 열이 연료비를 절감 할 수 있다는 생각으로 환기를 하지 않으면 절대습도가 높아 약간의 온도가 떨어져도 안개가 발생하게 된다. 3. 겨울철 저녁에 온실을 보온하기 전에 외부 공기로 충분히 환기하여 절대습도를 낮추면 노점온도가 낮아지고, 약간의 난방으로도 온실의 안개를 방지할 수 있다. 4. 여름철 상추재배에서 시원한 바람으로 공기환경을 개선한 결과 41.6%의 증수효과가 있었다. 5. 겨울철 육계농장의 공기환경 개선으로 47,300수 기준으로 폐사율 2%와 난방연료 40%를 절감할 수 있었으며, 육계 성장의 균일도를 53%→73%로 20%정도 높일 수 있었다. ※ 정기설 백암육계 농장(경기도 용인시 백암면 석천리) (011-719-7597)

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.230-236
• /
• 1998

Thermal environment of greenhouse was investigated by thermo-tracer in this study. The Thermo-tracer is a high-sensitivity infrared thermometer of non-contact type. The infrared energy emitted from the measured object is converted into an electrical signal by the detector(HgCdTe) and display as a color or black & white thermal image by way of optical scanning, The experiment was conducted for Venlo-type greenhouse with pad & fan system. The temperature difference between measured by Thermo-trace and measured by HOBO sensor is maximum 0.8$^{\circ}C$. Thermo-trace is possible to use for the thermal environment analysis and diagnosis of a cooling and heating system of greenhouse.