• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.313-316
• /
• 2008

This paper presents the error factors of Fall-of-potential test method used in measurements of the grounding-system impedance. This test methods inherently can introduce two possible errors in the measurements of grounding-system impedance: (1) ground mutual resistance due to current flow through ground from the ground electrode to the current probe, (2) ac mutual coupling between the current test lead and the potential test lead. The errors of ground mutual resistances and ac mutual coupling are expressed by the equation in calculating grounding impedance. These equations were calculated by Matlab that is commercial tool using mathematical calculation. The results of calculation were applied to correct grounding impedance.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권5호
• /
• pp.195-201
• /
• 2006

Tower footing resistance and fault current division factor are important design factors for evaluation of the lightning performance of the transmission line and/or design of the grounding electrode system. The periodic measurement of those factors are also important to verify that the grounding performance of the towers has been maintained good. However, the direct measurement of those factors in operating or energized condition is very difficult because of many practical reasons, such as the difficulty of disconnecting overhead groundwires from the tower under test. With supports by GECOL (General Electricitiy Company of Libya), we had a special chance to conduct Fall-Of-Potential (FOP) test on the energized 220 kV transmission towers before and after disconnecting the overhead groundwires from the towers under test. In this paper, the FOP test results on the towers and the fault current division factors estimated from the comparision of the FOP tests with and without overhead groundwires were presented. The computer models for the FOP test simulations were also constructed to find that the simulated results agreed very well with the measured ones.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권8호
• /
• pp.347-353
• /
• 2002

This paper presents an accurate method for measuring the ground resistance in powered grounding system. Most of substations and electric power equipments are interconnected to an extensive grounding network of overhead ground wires, neutral conductors of transmission lines, cable shields, and etc. The parasitic effects due to circulating ground currents and ground potential rise make a significant error in measuring the ground resistance. The test current transition method was proposed to reduce the effects of stray ground currents, ground potential rise and harmonic components in measurements of the ground resistance for powered grounding systems. The instrumental error of the test current transition method is decreased as the ratio of the test current signal to noise(S/N) increases. It was found from the test results that the proposed measuring method of the ground resistance is more accurate than the conventional fall-of-potential method or low-pass filter method, and the measuring error was less than 3[%]when S/N is 10.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.426-429
• /
• 1999

In this paper, we have provided the measurement technique of the grounding mesh resistance by field measurements. The standard of measurement is specified in the IEEE Std 81.2-1991 and JEAC 5001-1988, which is the the fall-of-potential method by test-current injection, but this method is difficult to apply at field, where is small around a electric power substation of domestic. For the convenient measurement method, space of assistant probe and quantity of test-current injection are changed step for step. As the result, ' the proposed measurement technique of grounding mesh resistance is that the space of current and potential probes must be fixed at 150rn from a grounding mesh, the test-current injection has to keep 5A or more.

• 한국의료질향상학회지
• /
• 제22권2호
• /
• pp.27-40
• /
• 2016

Purpose: Globally, falls are a major public health problem. The study aimed to evaluate the predictive validity of the Timed Up and Go test (TUGT) as a screening tool for fall risk. Methods: An electronic search was performed Medline, EMBASE, CINAHL, Cochran Library, KoreaMed and the National Digital Science Library and other databases, using the following keywords: 'fall', 'fall risk assessment', 'fall screening', 'mobility scale', and 'risk assessment tool'. The QUADAS-II was applied to assess the internal validity of the diagnostic studies. Thirteen studies were analyzed using meta-analysis with MetaDisc 1.4. Results: The selected 13 studies reporting predictive validity of TUGT of fall risks were meta-analyzed with a sample size of 1004 with high methodological quality. Overall predictive validity of TGUT was as follows. The pooled sensitivity 0.72 (95% confidence interval [CI]: 0.67-0.77), pooled specificity 0.58 (95% CI: 0.54-0.63) and sROC AUC was 0.75 respectively. Heterogeneity among studies was a moderate level in sensitivity. Conclusion: The TGUT's predictive validity for fall risk is at a moderate level. Although there is a limit to interpret the results for heterogeneity between the literature, TGUT is an appropriate tool to apply to all patients at a potential risk of accidental fall in a hospital or long-term care facility.

• 대한물리의학회지
• /
• 제2권1호
• /
• pp.73-84
• /
• 2007

Purpose : The purpose of this study was to determine risk factors and methods in balance assessment associated with fall in older adults. Methods : This article describes many of the tools that can be used to evaluate the physical parameters associated with fall risk in older adults. Results : Composite ratings of performance(Tinetti balance assessment, Guralnik test battery, Berg balance scale, modified-physical performance test) measures the score compounding the balance measure to determine fall risk. Static balance instruments are composed of FICSIT-4 that measures the ability of maintaining foot positions and CTSIB that measures postural stability. Dynamic balance instrument is composed of functional reach test. To measure walking velocity and mobility, 8-foot up-and-go test and walking around two cones are used. We can use 1-RM and to measure muscular strength, isokinetic dynamometery, and 30-second chair stand to measure lower extremity muscle strength. Conclusion : The described instruments are easy to use and widespread. To select and use these tool kits carefully is considered to be helpful in identifying those who are most likely to fall. The final part of the article includes a brief discussion of the potential role of exercise training interventions to improve these physical parameters and prevent falls.

• 한국응급구조학회지
• /
• 제20권3호
• /
• pp.69-83
• /
• 2016

Purpose: The purpose of this study was to explore the factors influencing evidence-based fall prevention nursing performance of hospital nurses. Methods: A self-reported questionnaire was completed by 344 nurses from three general hospitals from January 20 to March 10, 2013. The study instruments included general characteristics of the subjects, and awareness and performance of fall prevention. Data were analyzed by t test, ANOVA, Pearson's correlation, and multiple regression using SPSS v. 20.0. Results: There were statistically significant differences in awareness and performance according to age, marital status, clinical experiences, workplace, experience of fall prevention education, knowledge of fall prevention, compliance with fall prevention, attention level toward prevention, recognition level of potential falls, nurse responsibility for falls, importance of fall prevention, efforts level for fall prevention, and awareness score of falls prevention. There was a positive correlation among awareness and performance of fall prevention. Based on the multiple regression analysis, compliance with fall prevention, efforts level for fall prevention, and awareness score of falls prevention were significant predictors for performance of fall prevention. The explanation power of the model was 64.1%. Conclusion: The findings revealed the need to develop an effective nursing intervention to improve hospital nurses' performance for fall prevention.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권8호
• /
• pp.387-393
• /
• 2001

This paper describes an advanced measuring method and precise evaluation of the ground resistance for the grounding system of energized substations and power equipments. A grounding system of substations consists of all interconnected grounding connections of grounded conductors, neutral ground wires, underground conductors of distribution lines, cable shields, grounding terminals of equipments, and etc. It is very difficult to measure the accurate ground resistance of the grounding terminals of equipments, and etc. It is very difficult to measure the accurate ground resistance of the grounding system of high voltage energized substations because of harmonic components caused by switched power supplies or overloads. The conventional fall-of-potential method may be subject to big error if stray ground currents and potentials are present. In this work, to improve the precision in measurements of the ground resistance by eliminating the effects of harmonic components and stray currents and potentials, the investigations of the ground resistance measurement by using a low pass filter in a model energized grounding system were conducted. The accuracy of ground resistance mesurements was evaluated as a function of the ratio of the test signal to noise (S/N). The errors due to the proposed ground resistance measurement method were decreased with increasing S/N and were less than 5[%] as S/N is 10. The proposed ground resistance measurement method appears to be considerably more accurate than the conventional fall-of -potential method. It is allows cancellation of the parasitic resistance of energized grounding systems, to employ the measurement method that allows cancellation of the parasitic effects due to other circulating ground currents and ground potential rises in practical situations.

• 조명전기설비학회논문지
• /
• 제14권6호
• /
• pp.69-77
• /
• 2000

본 논문에서는 찬우$\mid$강하법에 의한 접지저항 및 대지첸위 분표의 측캠시 전휴보조전극의 영향에 대하여 기술하였으며, 측정시 오치를 최소화하는 기법을 제안하였다. 전위강해법은 전위와 천류의 측정에 이론적인 비1깅을 두고 있으며, 측정오차는 주로 측정시 설치하는 보조전극의 위치와 자체저항에 기인한다. 피측정 접지전극의 접지저항은 전위강하법에서 전위보조전극을 피측정 접지전극과 전류보조전극이 이루는 일직선상에 위치시킬 때 61.8[%]법칙을 적용하여 측정한다. 하지만 건물이나 포장도로, 구조물 등이 산재해 있는 도심의 경우에는 현장에서 피측정 접지전극과 전류보조전극 사이에 적결한 이격거리 확보가 불가능하거냐 전류보조전극의 접지저행값이 피측정 챔 지전극에 비하여 큰 값을 가지는 경우가 있다. 파측정 접지천극과 전류보조전극을 충분히 이격시키지 않거나 전류류보조전극의 접지저항값이 피측청 접지전극의 접지저항보다 비정상척으로 큰 경우 접지저항의 측정은 오차를 수반하게 되며, 측정된 접지저항값은 오차즐 보정해 주어야 한다. 본 연구애서 측정대상 전극은 길이 2.4[m]의 봉형 접지전극으호 하였으며, 전류보조전극의 영향을 고려할 때 피측정 접지전극과 전류보조전극의 적정한 이격거리는 피측정 접치전극 길이의 5배 이상으로 하여야 전위보조전극을 사설하기가 용이하며 측정정확도의 확보에 유리하다. 또한 전류보존전극의 접지저항값이 피측정 접지전극의 접지저항값 약 36.5배 이하에서는 거의 오차를 발생시키지 않는다.

• 한국안전학회지
• /
• 제30권4호
• /
• pp.46-50
• /
• 2015

This paper describes the measurement and analysis of ground impedance according to arrangement of auxiliary probe around ground grid using the fall-of-potential method and the testing techniques to minimize the measuring errors are proposed. The fall-of-potential method involves passing a current between a ground electrode and a current probe, and then measuring the voltage between a ground electrode and a potential probe. To minimize interelectrode influences due to mutual resistances, the current probe is a generally placed at a substantial distance from the ground electrode under test. In order to analyze the effects of ground impedance due to the arrangement of auxiliary probe and frequency, ground impedances were measured in case that the arrangements of auxiliary probe were straight line, perpendicular line, and horizontal line. The distance of current probe was located from 10[m] to 200[m] and the measuring frequency was ranged from 55[Hz] to 513[Hz]. As a consequence, the ground impedance increases with increasing the distance from the ground electrode to the point to be tested, but the ground impedance decreases with increasing the frequency.