• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.302-307
• /
• 2004

When trains run over a snow-covered track at high speed, the snow accereted under car bodies may drop during train running. The dropped snow/ice lumps scatter the ballast on the track damaging the car body and the environment along the track in snowy regions. In this study, the snow-fall condition in winter around the Seoul-Busan high-speed line has been investigated to yield the countermeasure for the high-speed line. The climate near Japanese and French high-speed line as well as the relationship between the climate and countermeasure has also been investigated and the direction of countermeasure for Seoul-Busan high-speed line has been deduced. Consequently, the amount and frequency of snow-fall near Seoul-Busan high-speed line is less than that of Japan and France, so the speed restriction could be the fundamental countermeasure for Seoul-Busan high-speed line, and additional measure on rolling stock and infrastructure should be followed.

• 한국환경복원기술학회지
• /
• 제15권2호
• /
• pp.9-18
• /
• 2012

The street canyon forms the geometric unit of the built environment. The geometry makes up urban canyons and it influences the urban climate. In order to investigate the wind characteristics of urban street canyon at Dogok-dong, Gangnam-gu in Seoul, the wind direction and wind speed data were observed and analyzed by using 2-D ultra sonic and propeller wind monitor from May 5, 2010 to May 4, 2011. The results show that the prevailing wind direction was west at Station A(Military Mutual Aid Association Building), southwest at Station B(Sookmyung Girls' High School) and the wind speed of Station B was higher than Station A. There were diurnal differences about prevailing wind direction between two stations : it was westerly wind at Station A for a whole day, but at Station B only from 22 : 00 to 04 : 00. However, Station B is different from Station A at other time. At Station B, it was easterly wind from 04 : 00 to 12 : 00, southwesterly wind from 12 : 00 to 22 : 00. In terms of seasonal(except winter) frequency, the spring shows the highest frequency and fall was the next.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.592-599
• /
• 2004

Talus topography is that weathered rock clasts were accumulated dropping in steep slope to action of gravity. Rock fall talus is formed by the accumulation of rock debris falling as individual particles from a cliff. If the collapse is produced in talus slope. it will be possible the loss of manpower and country. Despite correct access about talus is required, domestic research was scientific access about talus short because of short resolution of aerophoto and difficulties of research about huge talus. In this Study, Our research team analgize the wetness index using the geomorphogical data. Lineament through wetness index is simillar with distribution of the talus. And, the aim of the present study is to review and compare fabric data derived from rock fall talus about orientation, distribution and morphology. These deposits tend to have approximately equal amounts of clasts oriented parallel and perpendicular to the dip direction of the slope. And, platy- shaped clasts dominate the proximal and intermediate parts of the talus, wheres blocky-shaped clasts is more common in the distal part. we carry out Rock Fall Simulation. And, We install criteria of the rockfall protective barrier using talus and geomorphological characteristics.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2002년도 추계학술발표논문집
• /
• pp.278-282
• /
• 2002

본 논문은 반도체 패키징 제조에서 사용되고 있는 반도체 금형을 CAD/CAM을 활용하여 직접 제작하였다. 원래 반도체 금형은 강도와 열성이 아주 좋은 ASP23 재질을 사용하며 매우 고가이다. 또한 특수도팜, 열처리와 정밀한 가공이 되어야 정상적인 반도체 패키징을 할 수 있다. 제작 과정은 CAD/CAM을 활용하여 직접 제작하였으므로 반도체 금형의 제작 방향을 제시하는 계기가 되었다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2001년도 춘계학술대회 발표논문집
• /
• pp.277-280
• /
• 2001

We proposed a novel fractal-space multiplexing holographic memory system using moving window and double-focusing lens, which can eliminate crosstalk due to two neighboring moving window rows in the vertical direction of the conventional moving window holographic memory system, and demonstrated its feasibility through optical experiments.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2006년도 추계학술발표논문집
• /
• pp.242-244
• /
• 2006

본 논문에서는 레이더와 전자정보에서 획득한 방향정보 자료를 이용해서 전자파 정보를 융합하는 기술을 제시한다. 레이더에서 획득한 표적신호와 전자정보에서 획득한 정보신호를 융합하면 표적을 정확하게 확인할 수 있기 때문에 레이더의 탐지 오차율이 줄어들고 표적에 대한 상세 정보를 확보할 수 있어서 표적식별이나 목표물 선정에 쉽게 사용할 수 있다.

• 한국유체기계학회 논문집
• /
• 제13권2호
• /
• pp.36-40
• /
• 2010

Tidal current power system is the energy converter which converts the kinetic energy of tidal stream into electric energy. The performance of the rotor which initially converts the energy is determined by various design factors and it should be optimized by the ocean environment of the field. Flow direction changes due to rise and fall of the tides, but horizontal axis turbine is very sensitive to direction of flow. To investigate the rotor performance considering the interaction problems with incidence angle of flow, series of experiments have been conducted. The results and findings are summarized in the paper.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2011년도 춘계학술논문집 1부
• /
• pp.69-72
• /
• 2011

정부의 녹생성장 정책에 의해서 신재생에너지들의 보급률이 지속적으로 증가되고 있는 실정이다. 특히 배전계통에 태양광/풍력발전 등 분산전원의 설치가 급증함에 따라 기존 배전계통의 조류흐름이 단방향(One direction)에서 양방향(Bi-direction)으로 변화 되어 배전계통의 운용상에 여러 가지 문제점들이 발생할 가능성이 커지고 있다. 따라서 본 논문에서는 분산전원의 배전계통 연계에 따른 보호기기의 정정 및 보호협조검토가 가능한 보호협조 평가알고리즘을 개발하고, 그 알고리즘을 바탕으로 보호협조 평가시스템을 제작하였다. 이 평가시스템에 분산전원 연계 시, 배전계통의 보호기기들 사이의 보호협조를 검토하여 제안한 알고리즘의 유효성을 확인하였다.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• 제22권1호
• /
• pp.24-32
• /
• 1994

A special upper-air observation including airsonde and pibal observations was performed to investigate the characteristics features of the vertical distribution of the meteorological elements over Taegu on a selected clear day of each season from October 1991 to August 1992. The diurnal and seasonal variations of the vertical profiles of air temperature and mixing ratio were obtained from airsonde observations and wind speed and direction from pibal observations. The results of these special upper-air observations are as follow : The diurnal variation of the vertical distribution of air temperature reveals the characteristic features associated with the atmospheric boundary layer. All case days, except for the summer season, show upper-level inversion layer which influenced by surface high, and surface inversion layer produced by radiative cooling. The diurnal variation of mixing ratio shows the maximum vale at 1500 LST in both the upper and low levels, and is larger on the lower level than the upper level. The mixing ratio of the lower level is larger than that of the upper level. On the average the mixing ratio decrease with the height, and is the wettest on the summer case day and the driest on the winter case day. The diurnal variation of the wind velocity and direction are variable in the lower level with time and height, while they are steady in the upper level. On the average, the wind direction is southerly or southeasterly for the summer case day, westerly or northwesterly for the spring and fall case days, and northerly or northwesterly for the winter case day.

• 한국해양공학회지
• /
• 제24권4호
• /
• pp.8-12
• /
• 2010

The use of a tidal-current power system is one source of renewable energy that can minimize the environmental impact of power production and offer many other advantages compared to conventional energy sources. Unlike other energy production approaches, rate of energy production can be precisely predicted and the operational rate is very high. The performance of the rotor, which has a vital role in energy production using tidal currents, is determined by various design factors, and it should be optimized for the specific ocean environment in the field. The horizontal-axis turbine is very sensitive to the direction of flow, and flow direction changes due to rise and fall of the tides. To investigate the performance of the rotor considering the interaction problems with incidence angle of flow, a series of experiments were conducted, and a 3D CFD model was designed and analyzed by ANSYS CFX. The results and findings are summarized in the paper.