• Journal of Acupuncture Research
• /
• v.27 no.2
• /
• pp.143-154
• /
• 2010

Objectives : The main purpose of this research is to make a survey of the effective way of the Oriental medical care and to enlarge the range of Oriental medical treatment about neck pain patients caused by traffic accident. Methods : In following research. we surveyed 197 neck pain patients of traffic accident who admitted in Daegu Hanny University Oriental Medical Hospital from May, 1, 2008 to september, 30, 2009 according to medical chart. Results : 1. In distribution of gender and age, the rate of female was 74.6%, that of male was 25.4% and the majority of the patients were thirties. In results of treatment according to gender and age, the effective rate of female was higher than the male. that of teens was highest. 2. In total results of treatment, the highest distribution was fair with 40.1%, the effective rate was 90.9%. 3. In category of traffic accident patterns, the highest distribution was car to car crash with 81.7%. The results of treatment according to the significance test were shown statistical significance. 4. In admission days, the highest distribution was 6~10 days with 41.1%. The highest effective rate was 21~25days with 100%. The results of treatment according to the significance test were shown statistical significance. Conclusions : This study suggested that Oriental medical treatments are effective in patients of neck pain caused by traffic accident. Further studies are needed for progress report that after accident patients are discharged from the Oriental Medical Hospital.

• Journal of Korea Water Resources Association
• /
• v.52 no.7
• /
• pp.493-503
• /
• 2019

This study presents a new method of estimating the size distribution of river bed gravel through image processing. The analysis was done in two steps; first the individual grain images were analyzed and then the grain particle segmentation of river-bed images were processed. In the first part of the analysis, the relationships (long axes, intermediate axes and projective areas) between grain features from images and those measured were compared. For this analysis, 240 gravel particles were collected at three river stations. All particles were measured with vernier calipers and weighed with scales. The measured data showed that river gravel had shape factors of 0.514~0.585. It was found that the weight of gravel had a stronger correlation with the projective areas than the long or intermediate axes. Using these results, we were able to establish an area-weight formula. In the second step, we calculated the projective areas of the river-bed gravels by detecting their edge lines using the ImageJ program. The projective areas of the gravels were converted to the grain-size distribution using the formula previously established. The proposed method was applied to 3 small- and medium- sized rivers in Korea. Comparisons of the analyzed size distributions with those measured showed that the proposed method could estimate the median diameter within a fair error range. However, the estimated distributions showed a slight deviation from the observed value, which is something that needs improvement in the future.

• Journal of Sericultural and Entomological Science
• /
• v.17 no.1
• /
• pp.1-26
• /
• 1975

These studies were attempted to find out the optimum silk reeling system by use of automatic silk reeling machine to increase raw silk yield and reeling efficiency with various silk reelable cocoons. The obtained results are as follows; 1. The mean silk reelability ratio(X)of the Korean cocoons during the last ten years was 61 per cent, beside 64.7 per cent in autumn cocoon and 57.3 per cent in spring cocoon. However, the ratio variation of autumn cocoons was larger than that of spring cocoons. 2. A positive correlation between cocoon filament breaks during its process and silk reelability levels was shown to be significant. The cocoons of both poor and good reelability evidenced "J" shape distribution on the filament break graph by the order of reeling cocoon end. Many bave breaks were found at the inner shell of the cocoons, or in case of poor reelability cocoons. 3. The morphology of broken cocoon ends during the process was classified into A, B, C, D, E and F types, The occurrence of B type was majority, but that of F type was minority among them. 4. In case of the cocoon cooking, H-type ion-exchanged soft water was better for good reelability cocoons, Na and H-type ion exchanged neutral soft water for those of fair reelability, and alkaline (Na-type) soft water for those of poor reelability, respectively. 5. The modification of cooking water by mixing the above different types of water (50％ Na-type and 50％ H-type passed by standard natural water; 75％ Na-type and 25％ H-type passed by hard natural water; 25％ Na-type and 75％ H-type passed by soluble natural water) made higher yield of raw silk with tess breaks of thread. 6, In case cocoon ends groping water included sodium hexametaphosphate as much as 800 ppm. the groping efficiency and raw silk yield of cocoon was improved. The effect was pronounced in case of poor reelability cordons. 7. The most reasonable cocoon cooking and silk reeling condition for automatic silk reeling process were observed to be rather incomplete cook with good reelability cocoons and optimum cook with poor reelability cocoons succeeded by the reeling bath temperature of 45$^{\circ}C$, 8. The reasonable silk reeling velocities were observed to be about 150m per min. for good reelability cocoons, 120m per min. for fair reelability ones and 90 to 120m per min. for poor reelability ones. 9. In order to improve the raw silk yield of cocoons and reeling efficiency, the cocoon stand-by-ratio for reeling should be kept at the level of 40 per cent for good reelability cocoons or at 60 per cent for poor reelability ones beside necessary end found cocoon condition.

• The Korean Journal of Franchise Management
• /
• v.9 no.2
• /
• pp.7-16
• /
• 2018

Purpose - Turnover Intention in the franchise industry is becoming a very important issue. This study examines the structural relationships between organizational justice, emotion, job satisfaction, and turnover intention in the franchise industry. In this model, emotion was classified into two sub-dimensions such as positive and negative emotion. Research design, data, methodology - The sample of this study collected from employees of a food-service franchise company is representative. Copies of the questionnaire along with a cover letter were delivered by a research assistant to the human resources manager or the general manager of the selected food-service franchise firms after they agreed to participate in the study. In order to increase the response rate of the respondents, a small gift was provided to the respondents who completed the questionnaire. A total of 300 questionnaires were distributed and 285 returned responses, 9 responses were not usable due to missing information. Thus, a total of 276 responses were used using structural equation modeling with Smartpls 3.0. Results - The results showed that organizational justice had positive significant effects on positive emotion and job satisfaction. Job satisfaction had negative a significant effect on turnover intention. And negative emotion had positive significant effect on turnover intention. Conclusions - The results of this study provide some implications. If employees feel that the franchise headquarters is fair about the methods and procedures of decision making, resource allocation, information sharing, etc., it means that employees feel better. If the franchise's decision-making processes and methods and results are transparently disclosed and processed in accordance with the internal rules of the company, the employees will be able to fully understand and accept them. The results of this study also show that positive and negative emotions of service-based franchise employees have different effects on job attitude and organizational behavior. In particular, when negative emotions of employees are passed on to others and the results are negative, employees may feel that they are disoriented or wrong. Therefore, the franchise headquarters should try to inspire employees' sense of organizational community, and should pay attention to how to relieve the job stress and the fair distribution of work and rewards.

• Journal of Acupuncture Research
• /
• v.25 no.3
• /
• pp.127-138
• /
• 2008

Objectives : This study was designed to evaluate the general distribution and the efficacy of oriental medical treatment for Lumbar Disc Herniation. Subjects and Methods : The 137 patients who had a diagnosis of HIVD by Lumbar-CT of Lumbar-MRI and admitted to Dunsan oriental medical hospital in Daejon university from January 2005 to December 2007 were observed. They were analyzed according to the distribution of sex, age, the period of disease, causing factor, The patient-condition on admission, the symptom on admission, Admission day, Herniation type of the disc and the treatment efficacy was evaluated respectively. Results : 1. Male was more than female in the ratio of 1 : 1.174, and forties 28% the most, the acutest phase 48% the most, reason unknown 30% the most, Grade III 42% the most, Back and Leg radiate pain 65% the most, the day of 6-10 29% the most, protruded disc type 48% the most. 2. In the total treatment result, the good was 48%, the excellent 28%, the fair 15%, the poor 9% in order. 3. the "effective rate"(the percentage of positive effective treatment case) of each distribution, the thirties and fifties 100% the most, subacute phase 100% the most, exercise, traffic accident 100% the most respectively, Grade III 93% the most, only low back pain 97% the most, the day of 16-20 100% the most, Extruded disc 100% the most. Conclusions : Total effective rate was 91%. We have Known the efficacy of oriental medical treatment for HIVD, was good and early treatment was better than late treatment.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.11
• /
• pp.53-62
• /
• 1994

This paper presents a new approach of analyzing errors resulting from nonideal general-purpose lighting environment when the Photometric Stereo Method (PSM) is applied to estimate the surface-orientation of a three-dimensional object. The approach introduces the explicit modeling of the lighting environment including a circular-disk type irradiance object plane and the direct simulation of the error distribution with the model. The light source is modeled as a point source that has a certain amount of beam angle, and the luminance distribution on the irradiance plane is modeled as a Gaussian function with different deviation values. A simulation algorithm is devised to estimate the light source orientation computing the average luminance intensities obtained from the irradiance object planes positioned in three different orientations. The effect of the nonideal lighting model is directly reflected in such simulation, because of the analogy between the PSM and the proposed algorithm. With an instrumental tool designed to provide arbitrary orientations of the object plane at the origin of the coordinate system, experiment can be performed in a systematic way for the error analysis and compensation. Simulations are performed to find out the error distribution by widely varying the light model and the orientation set of the object plane. The simulation results are compared with those of the experiment performed in the same way as the simulation. It is confirmed from the experiment that a fair amount of errors is due to the erroneous effect of the general-purpose lighting environment.

• The Journal of Korean Society for Radiation Therapy
• /
• v.21 no.2
• /
• pp.57-65
• /
• 2009

Purpose: The purpose of this paper is to provide basic data in order to systemize the management of demand and supply of radiologic technicians, to pursue a fair regional distribution of educational institutions, and furthermore to keep reasonable medical treatment and fee. This research was carried out through the investigation of radiologic equipments and technicians according to the distribution of the population. Materials and Methods: We compared and analyzed the correlation between regional population, the number of clinics and hospitals, the number of medical imaging devices, and the number of radiologists and radiologic technicians in 5 cities without "Gu" administrative units in 2008. Results: 27,317 radiologic technicians have been produced since the administration of the national qualifying exam for radiologic technicians. About 18,000 radiologic technicians are currently working. There are 39 colleges or universities with Departments of Radiology and the admission quota is 2,120 students excluding one college. The ratio of radiologic equipments to radiologic technicians is 2.6 to 1. Conclusion: There is a dilemma in which some radiologic technicians fail to find appropriate jobs while some clinics or hospitals are in need of radiologic technicians. This dilemma is due to unreasonable regional discrepancies in pay system and welfare situation, and excessive profit-oriented recruiting system of clinics and hospitals. The increase of students of Radiologic Departments and approval of additional departments will end up with producing superfluous high academic degree holders, which is on the contrary to the government policy to produce more job opportunities. So the policy of increasing Radiologic Departments should be reconsidered.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.68.1-68.1
• /
• 2012

The best part of graphene is - charge-carriers in it are mass less particles which move in near relativistic speeds. Comparing to other materials, electrons in graphene travel much faster - at speeds of $10^8cm/s$. A graphene sheet is pure enough to ensure that electrons can travel a fair distance before colliding. Electronic devices few nanometers long that would be able to transmit charge at breath taking speeds for a fraction of power compared to present day CMOS transistors. Many researches try to check a possibility to make it a perfect replacement for silicon based devices. Graphene has shown high potential to be used as interconnects in the field of high frequency electrical devices. With all those advantages of graphene, we demonstrate characteristics of electrical and optical properties of graphene such as the effect of graphene geometry on the microwave properties using the measurements of S-parameter in range of 500 MHz - 40 GHz at room temperature condition. We confirm that impedance and resistance decrease with increasing the number of graphene layer and w/L ratio. This result shows proper geometry of graphene to be used as high frequency interconnects. This study also presents the optical properties of graphene oxide (GO), which were deposited in different substrate, or influenced by oxygen plasma, were confirmed using different characterization techniques. 4-6 layers of the polycrystalline GO layers, which were confirmed by High resolution transmission electron microscopy (HRTEM) and electron diffraction analysis, were shown short range order of crystallization by the substrate as well as interlayer effect with an increase in interplanar spacing, which can be attributed to the presence of oxygen functional groups on its layers. X-ray photoelectron Spectroscopy (XPS) and Raman spectroscopy confirms the presence of the $sp^2$ and $sp^3$ hybridization due to the disordered crystal structures of the carbon atoms results from oxidation, and Fourier Transform Infrared spectroscopy (FTIR) and XPS analysis shows the changes in oxygen functional groups with nature of substrate. Moreover, the photoluminescent (PL) peak emission wavelength varies with substrate and the broad energy level distribution produces excitation dependent PL emission in a broad wavelength ranging from 400 to 650 nm. The structural and optical properties of oxygen plasma treated GO films for possible optoelectronic applications were also investigated using various characterization techniques. HRTEM and electron diffraction analysis confirmed that the oxygen plasma treatment results short range order crystallization in GO films with an increase in interplanar spacing, which can be attributed to the presence of oxygen functional groups. In addition, Electron energy loss spectroscopy (EELS) and Raman spectroscopy confirms the presence of the $sp^2$ and $sp^3$ hybridization due to the disordered crystal structures of the carbon atoms results from oxidation and XPS analysis shows that epoxy pairs convert to more stable C=O and O-C=O groups with oxygen plasma treatment. The broad energy level distribution resulting from the broad size distribution of the $sp^2$ clusters produces excitation dependent PL emission in a broad wavelength range from 400 to 650 nm. Our results suggest that substrate influenced, or oxygen treatment GO has higher potential for future optoelectronic devices by its various optical properties and visible PL emission.

• Journal of Distribution Science
• /
• v.9 no.1
• /
• pp.17-27
• /
• 2011

As the world becomes more globalized, business competition becomes fiercer, while consumers' needs for less expensive quality products are on the increase. Business operations make an effort to secure a competitive edge in costs and services, and the logistics industry, that is, the industry operating the storing and transporting of goods, once thought to be an expense, begins to be considered as the third cash cow, a source of new income. Logistics centers are central to storage, loading and unloading of deliveries, packaging operations, and dispensing goods' information. As hubs for various deliveries, they also serve as a core infrastructure to smoothly coordinate manufacturing and selling, using varied information and operation systems. Logistics centers are increasingly on the rise as centers of business supply activities, growing beyond their previous role of primarily storing goods. They are no longer just facilities; they have become logistics strongholds that encompass various features from demand forecast to the regulation of supply, manufacturing, and sales by realizing SCM, taking into account marketability and the operation of service and products. However, despite these changes in logistics operations, some centers have been unable to shed their past roles as warehouses. For the continuous development of logistics centers, various measures would be needed, including a revision of current supporting policies, formulating effective management plans, and establishing systematic standards for founding, managing, and controlling logistics centers. To this end, the research explored previous studies on the use and effectiveness of logistics centers. From a theoretical perspective, an evaluation of the overall introduction, purposes, and transitions in the use of logistics centers found issues to ponder and suggested measures to promote and further advance logistics centers. First, a fact-finding survey to establish demand forecast and standardization is needed. As logistics newspapers predicted that after 2012 supply would exceed demand, causing rents to fall, the business environment for logistics centers has faltered. However, since there is a shortage of fact-finding surveys regarding actual demand for domestic logistic centers, it is hard to predict what the future holds for this industry. Accordingly, the first priority should be to get to the essence of the current market situation by conducting accurate domestic and international fact-finding surveys. Based on those, management and evaluation indicators should be developed to build the foundation for the consistent advancement of logistics centers. Second, many policies for logistics centers should be revised or developed. Above all, a guideline for fair trade between a shipper and a commercial logistics center should be enacted. Since there are no standards for fair trade between them, rampant unfair trades according to market practices have brought chaos to market orders, and now the logistics industry is confronting its own difficulties. Therefore, unfair trade cases that currently plague logistics centers should be gathered by the industry and fair trade guidelines should be established and implemented. In addition, restrictive employment regulations for foreign workers should be eased, and logistics centers should be charged industry rates for the use of electricity. Third, various measures should be taken to improve the management environment. First, we need to find out how to activate value-added logistics. Because the traditional purpose of logistics centers was storage and loading/unloading of goods, their profitability had a limit, and the need arose to find a new angle to create a value added service. Logistic centers have been perceived as support for a company's storage, manufacturing, and sales needs, not as creators of profits. The center's role in the company's economics has been lowering costs. However, as the logistics' management environment spiraled, along with its storage purpose, developing a new feature of profit creation should be a desirable goal, and to achieve that, value added logistics should be promoted. Logistics centers can also be improved through cost estimation. In the meantime, they have achieved some strides in facility development but have still fallen behind in others, particularly in management functioning. Lax management has been rampant because the industry has not developed a concept of cost estimation. The centers have since made an effort toward unification, standardization, and informatization while realizing cost reductions by establishing systems for effective management, but it has been hard to produce profits. Thus, there is an urgent need to estimate costs by determining a basic cost range for each division of work at logistics centers. This undertaking can be the first step to improving the ineffective aspects of how they operate. Ongoing research and constant efforts have been made to improve the level of effectiveness in the manufacturing industry, but studies on resource management in logistics centers are hardly enough. Thus, a plan to calculate the optimal level of resources necessary to operate a logistics center should be developed and implemented in management behavior, for example, by standardizing the hours of operation. If logistics centers, shippers, related trade groups, academic figures, and other experts could launch a committee to work with the government and maintain an ongoing relationship, the constraint and cooperation among members would help lead to coherent development plans for logistics centers. If the government continues its efforts to provide financial support, nurture professional workers, and maintain safety management, we can anticipate the continuous advancement of logistics centers.

• The Journal of Asian Finance, Economics and Business
• /
• v.6 no.3
• /
• pp.247-258
• /
• 2019

The paper aims to examine the factors affecting brand and student decision in buying fresh milk. Combining qualitative and quantitative research methods, this study used self-completed questionnaires to investigate 520 students in Ho Chi Minh City. The results of the study show that that there are five key determinants affecting the dairy brand and student decision in buying fresh milk, including: (1) product quality, (2) fair price, (3) product promotion and customer services, (4) product convenience, and (5) reference group's attitude to the brand. In addition, it is also found that product brand has a direct and positive impact on the student decision. The finding in this study is quite different from other existing literatures in terms of the importance level of the determinants of the student decision in buying fresh milk; specifically, in deciding to buy their fresh milk, students are often interested in the promotion and customer service, the product convenience, and the reference group for the purchase, more than in the quality and price of the product. From these findings, some managerial implications are proposed for policy-makers and relevant enterprises to have appropriate policies and strategies for their business development.