• Journal of Chest Surgery
• /
• v.30 no.2
• /
• pp.137-145
• /
• 1997

From July 1983 to December 1993, total 112 consecutive mitral valve replacements in 107 patients were performed in patient with mitral valvular abnormalities. To estimate the risk factor related to operative death, all patient's perioperative data were reviewed retrospectively. Except 20 patients received concomitant aortic valve replacement and 2 patients had incomplete data, 85 patients were included in this study. Mean age were $37.3\pm$ 13.1 years ranging from 13 to 72 years. Thirty-seven patients were male and fourty-eight patients were female. Mean follow-up durations were $51.1\pm33.8$ months ranging from 6 months t 11 years. Patients in this study showed improvement in mean NYHA functional clssification, from $3.02\pm0.73$ to 1 $78\pm0.55,$ and also in cardiothoracic ratio, from 0.61 $\pm0.09$ to $0.58\pm0.08$ at 6 months follow-up after operation. Operative complications were detected in 23 patients(27.1 %) and common postoperative complications were rhythm disturbance in 7 cases, pulmonary complications in 6 cases and low cardiac output syndrome in 6 cases. Early mortality was 10.6%(n=9) and the most common cause of death was a congestive heart failure due to low cardiac output syndrome. Main cause of our higher operative mortality than other study was that operative mortality in the initial period of our mitral surgery was high(5 operative deaths among 19 mitral valve replacement from July 1983 to December 1985). Actuarial survival was 80.8% at 5 years, 71.8% at 11 years including operative deaths. Actuarial freedom from anticoagulant-related bleeding was 85.3% at 5 years, 78.3% at 11 years. 95.1% at 5 years and 88.8% at 11 years among the patient in this study were free from thromboembolism, and 97.5% at 5 years and 75.1% at 11 years were free from reoperation. Preoperative cardiothoracic ratio and patient's age were statistically significant operative risk factors.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.3
• /
• pp.14-26
• /
• 2018

The Biotope Area Ratio (BAR) is a quantitative pre-planning index for sustainable development and an integrated indicator for the balanced development of buildings and outdoor spaces. However, it has been pointed out that there are problems in operations management: errors in area calculation, insufficiency in the underground soil condition and depth, reduction in biotope area after construction, and functional failure as a pre-planning index. To address these problems, this study proposes implementing LIM. Since the weights of the BAR are mainly decided by the underground soil condition and depth with land cover types, the study focused on the terrain and pavements. The model should conform to BIM guidelines and standards provided by government agencies and professional organizations. Thus, the scope and Level Of Detail (LOD) of the model were defined, and the method to build a model with BIM software was developed. An apartment complex on sloping ground was selected as a case study, a 3D terrain modeled, paving libraries created with property information on the BAR, and a LIM model completed for the site. Then the BAR was calculated and construction documents were created with the BAR table and pavement details. As results of the study, it was found that the application of the criteria on the BAR and calculation became accurate, and the efficiency of design tasks was improved by LIM. It also enabled the performance of evidence-based design on the terrain and underground structures. To adopt LIM, it is necessary to create and distribute LIM library manuals or templates, and build library content that comply with KBIMS standards. The government policy must also have practitioners submit BIM models in the certification system. Since it is expected that the criteria on planting types in the BAR will be expanded, further research is needed to build and utilize the information model for planting materials.

• Korean Journal of Weed Science
• /
• v.31 no.3
• /
• pp.221-228
• /
• 2011

Weed control is of fundamental importance when planting horticultural crops, particularly during the establishment phase. Weeds compete for nutrients, water and light, and can severely threaten the survival and early growth of newly planted crops. Failure to control weeds represents one of the single most important factors leading to crop loss. Knowledge on the existence of the diversity of weed species in greenhouses is of our main concern in this study in order to develop a most efficient and effective weed control strategies. Sixty-two greenhouses were surveyed in 3 cities and counties of Gyeongnam area in March to October 2009 to investigate the feature of weed occurrence in polyvinyl chloride (PVC) after harvesting of the main crops. Forty-one weed species were identified and classified to 18 families which were composed of 14 annual weeds, 18 summer annual weeds and 9 perennial weeds. On the other hand, broadleaf, grasses and sedges recorded with 30, 7 and 4 weed species, respectively. Asteraceae was the most dominant weed species (9 species) noted followed by Poaceae (7 species), Cyperaceae (4 species), Caryophyllaceae and Brassicaceae (3 species respectively) and other families have 1~2 species. The dominant weed species occurred in the greenhouse based on the summed dominance ratio. These weeds were Digitaria sanguinalis, Cyperus iria, Portulaca oleracea, Rorippa islandica, Mazus japonicas, Cardamine flexousa, and Eclipta prostrata and others. Weed occurrence in the greenhouse after horticultural crops consisted of summer annuals (4 species), winter annuals (3 species), and perennial annuals (1 specie). The dominant species occurred in tilled soil based on summed dominance ratio of weeds were Cardamine flexousa (88.1%), Eclipta prostrate (57.4%) and Portulaca oleracea (55.2%). Comparison of weed occurrence was thoroughly surveyed also in which field without PVC, weed species were Portulaca oleracea (55.2), Eclipta prostrata (57.9%) and Trigonotis peduncularis (25.1%) and field with PVC, the identified weeds were Portulaca oleracea (98.75), Trigonotis peduncularis (49.1%), and Eclipta prostrata (36.8%).

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.28-40
• /
• 2010

Purpose: The aim of this retrospective study was to provide long-term data about the correlation between multifactorial local factors and the survival of implants. Material and methods: During 19 years (1991 to 2009), 2796 implants were placed in 879 patients. From dental charts and radiographs, the following data were collected: patient's age at implant placement, gender, implant system, surface, length, diameter, location of implant placement, bone quality, primary stability, type of prosthesis. The correlations between these data and implant survival were analyzed. Statistical analysis was performed using Kaplan-Meier survival analysis, Chi-square test, odds ratio. Results: 1. Among the 2796 implants, 150 implants failed that resulted in a cumulative survival rate of 94.64%. The cumulative survival rate of smooth surface implants (91.76%) was lower than rough surface implants (96.02%). 2. Anatomic location, implant surface, diameter of smooth surface implant, primary stability, type of prosthesis, patient's age and gender were significantly associated with implant survival (P < .05). 3. No significant difference in implant survival was found in relation to the following factors: implant length, bone quality, diameter of rough surface implants and type of rough surface according to implant manufacturer (P < .05). Conclusions: Local factors such as anatomic location, implant surface, diameter of smooth surface implant, primary stability and type of prosthesis have a significant effect on implant survival.

• Journal of Chest Surgery
• /
• v.42 no.6
• /
• pp.685-695
• /
• 2009

Background: Calcification is the most frequent cause of clinical failure of bioprosthetic tissues that are fabricated from Glutaraldehyde (GA)-fixed porcine valve or bovine pericardium. We recently used a multi-factorial approach of employing different mechanisms to investigate how to reduce the calcification of bioprosthetic tissues. The purpose of the present study was to evaluate the synchronized synergism using ethanol, L-lysine and $NaBH_4$ in glutaraldehyde treated porcine pericardium from the standpoint of calcification and tissue elasticity. Material and Method: Porcine pericardium was fixed with 0.625% GA (commercial fixation). An interim step of ethanol (80%; 1 day at room temperature) or L-lysine (0.1 M; 2 days at $37^{\circ}C$) or $NaBH_4$ (0.1 M; 2 days at room temperature) was followed by completion of the GA fixation (2 days at $4^{\circ}C$ and 7 days at room temperature). The tensile strength and thickness of the samples were measured. The treated pericardiums were implanted subcutaneously into three-week old Sprague-Dawley rats for 8 weeks. The calcium content was assessed by atomic absorption spectroscopy and the histology of the samples. Result: The amount of calcium in the pericardium pretreated with ethanol (13.6${\pm}$10.0 ug/mg, p=0.008), L-lysine (15.3${\pm}$1.0 ug/mg, p=0.002) and both (16.1${\pm}$11.1 ug/mg, p=0.012) was significantly reduced compared with the control (51.2${\pm}$8.5 ug/mg). However, $NaBH_4$ pretreatment (65.7${\pm}$61.8 ug/mg, p=0.653) and combined pretreatment that including ethanol, L-lysine and $NaBH_4$ (92.9${\pm}$58.3 ug/mg, p=0.288) were not significantly different from the controls(51.2${\pm}$8.5 ug/mg). Both the combined pretreatment using ethanol and L-lysine (7.60${\pm}$1.55, p=0.76) and the combined pretreatment that included ethanol, L-lysine and $NaBH_4$ (7.47${\pm}$1.85, p=0.33) increased the tensile strength/thickness ratio compared with that of the controls (4.75${\pm}$1.88). Conclusion: The combined pretreatment using ethanol and L-lysine seemed to decrease the calcification of porcine pericardium fixed with glutaraldehyde, as compared to single pretreatment, and it increase the tissue elasticity, but to the degree that showed synchronized synergism. $NaBH_4$ pretreatment seemed to increase the calcification of porcine pericardium, irrespective of whether single or combined pretreatment was used.

• Radiation Oncology Journal
• /
• v.29 no.1
• /
• pp.44-52
• /
• 2011

Purpose: To evaluate the outcomes and prognostic factors of postoperative radiotherapy (PORT) for patients with pathological stage III non-small-cell lung cancer (NSCLC) at a single institution. Materials and Methods: From 2000 to 2007, 88 patients diagnosed as having pathologic stage III NSCLC after curative resection were treated with PORT. There were 80 patients with pathologic stage IIIA and eight patients with pathologic stage IIIB in the AJCC 6th staging system. The majority of patients (n=83) had pathologic N2 disease, and 56 patients had single station mediastinal LN metastasis. PORT was administered using conventional technique (n=76) or three-dimensional conformal technique (n=12). The median radiation dose was 54 Gy (range, 30.6 to 63 Gy). Thirty-six patients received chemotherapy. Radiation pneumonitis was graded by the Radiation Therapy Oncology Group system, and other treatment-related toxicities were assessed by CTCAE v 3.0. Results: Median survival was 54 months (range, 26 to 77 months). The 5-year overall survival (OS) and disease free survival (DFS) rates were 45% and 38%, respectively. The number of metastatic lymph nodes was associated with overall survival (hazard ratio, 1.037; p-value=0.040). The 5-year locoregional recurrence free survival (LRFS) and distant metastasis free survival (DMFS) rates were 88% and 48%, respectively. Multiple stations of mediastinal lymph node metastasis was associated with decreased DFS and DMFS rates (p-value=0.0014 and 0.0044, respectively). Fifty-one relapses occurred at the following sites: 10 loco-regional, 41 distant metastasis. Grade 2 radiation pneumonitis was seen in three patients, and symptoms were well tolerated with anti-tussive medication. Grade 2 radiation esophagitis was seen in 11 patients. There were no grade 3 or more severe complications associated with PORT. Conclusion: Our retrospective data show that PORT for pathological stage III NSCLC is a safe and feasible treatment and could improve loco-regional control. The number of metastatic lymph nodes and stations of mediastinal lymph node metastasis were analyzed as prognostic factors. Furthermore, efforts are needed to reduce distant metastasis, which is a major failure pattern of advanced stage NSCLC.

• Radiation Oncology Journal
• /
• v.15 no.4
• /
• pp.393-402
• /
• 1997

Purpose : When an x-ray beam of small field size is irradiated to target area containing an air cavity, such as larynx, the underdosing effect is observed in the region near the interfaces of air and soft tissue. With a larynx model, air cavity embedded in tissue-equivalent material, this study is intonded for examining Parameters, such as beam quality, field size, and cavity size, to affect the dose distribution near the air cavity. Materials and Methods : Three x-rar beams, 4-, 6- and 10-MV, were employed to Perform a measurement using a 2cm $(width){\times}L$ (length in cm, one side of x-ray field used 2cm (height) air cavity in the simulated larynx. A thin window parallel-plate chamber connected to an electrometer was used for a dosimetry system. A ratio of the dose at various distances from the cavity-tissue interface to the dose at the same points in a homogeneous Phantom (ebservedlexpected ratio, O/E) normalized buildup curves, and ratio of distal surface dose to dose at the maximum buildup depth were examined for various field sizes. Measurement for cavity size effect was performed by varying the height (Z) of the air cavity with the width kept constant for several field sizes. Results : No underdosing effect for 4-MV beam for fields larger than $5cm\times5cm$ was found For both 6- and 10-MV beams, the underdosing portion of the larynx at the distal surface was seen to occur for small fields, $4cm\times4cm\;and\;5cm\times5cm$. The underdosed tissue was increased in its volume with beam energy even for similar surface doses. The relative distal surface dose to maximum dose was changed to 0.99 from 0.95, 0.92, and 0.91 for 4-, 6-, and 10-MV, respectively, with increasing field size, $4cm\times4cm\;to\;8cm\times8cm$, For 6- and 10-MV beams, the dose at the surface of the cavity is measured less than the predicted by about two and three percent. respectively. but decrease was found for 4-MV beam for $5cm\times5cm$ field. For the $4cm\timesL\timesZ$ (height in cm). varying depth from 0.0 to 4.8cm, cavity, O/E> 1.0 was observed regardless of the cavity size for any field larger than about $8cm\times8cm$. Conclusion : The magnitude of underdosing depends on beam energy, field size. and cavity size for the larynx model. Based on the result of the study. caution must be used when a small field of a high quality x-ray beam is irradiated to regions including air cavities. and especially the region where the tumor extends to the surface. Low quality beam. such as. 4-MV x-ray, and larger fields can be used preferably to reduce the risk of underdosing, local failure. In the case of high quality beams such as 6- and 10-MV x-rays, however. an additional boost field is recommended to add for the compensation of the underdosing region when a typically used treatment field. $8cm\times8cm$, is employed.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.25-31
• /
• 1974

1. Various gluing qualities applying Resorcinol Plyophen #6000 were studied on aiming the strength relationships of laminated woods resulted by single species [poplar (Populus deltoides), larch(Larix leptolepis)], mixed species of (poplar and larch), preservatives, treated poplar the scarf joint with mixed species of poplar and larch and the scarf joint treated with preservatives. 1. 1 On the block shear and on the DVL tension test, the mean wood failure ratio showed an excellent value i.e., above 65% and the tangential strength for larch was higher than that of radial, but it was reversed for poplar as shown in Tables 1 and 2. 1. 2 The lamina treated with Na-PCP reduced slightly the strength but the limited strength allowed for manufacturing laminated wood was not influenced by treating Na-PCP as shown in Tables 3 and 4. 1. 3 The safe scarf ratio in the plane scarf joint was above 1/12 for larch and 1/6 for poplar regard less of the chemical treatment or untreatment as shown in Tables. 5, 6, 7 and 8. 2. In the normal and boiled state, the gluing quality of the laminated wood composed of single[poplar (Populus deltoides), larch (Larix leptolepis)] and double species (poplar and larch) glued with Resorcinol Plyophen #6000 were measured as follow, and also represented the delamination of the same laminated wood. 2.1 The normal block shear strength of the straight and curved laminated wood (in life size) were more than three times of the standards adhesion strength. And, the value of the boiled stock was decreased to one half of the standard shear adhesion strength, but it was more than twice the standard strength for the boiled stock. Thus, it was recognized that the water resistance of the Resorcinol Plyophen #6000 was very high as shown in Tables 9 and 10. 2. 2 The delamination ratio of the straight and curved laminated woods in respect of their composition were decraesed, in turn, in the following order i. e., larch, mixed stock (larch+poplar) and poplar. The maximum value represented by the larch was 3.5% but it was below the limited value as shown in Table 11. 3. The various strengthes i.e., compressive, bending and adhesion obtainted by the straight laminaced wood which were constructed by five plies of single and double species of lamina i. e., larch (Larix leptolepis) and poplar (Populus euramericana), glued with urea resin were shown as follows: 3. 1 If desired a higher strength of architectural laminated wood composed of poplar (P) and larch (L), the combination of the laminas should be arranged as follows, L+P+L+P+L as shown in Table 12. 3.2 The strength of laminated wood composed of laminas which included pith and knots was conside rably decreased than that of clear lamina as shown Table 13. 3.3 The shear strength of the FPL block of the straight laminated wood constructed by the same species which were glued with urea adhesives was more than twice the limited adhesion strength, thus it makes possible to use it for interior constructional stock.

• Journal of Chest Surgery
• /
• v.39 no.5 s.262
• /
• pp.354-358
• /
• 2006

Background: Pulsatile pumps for extracorporeal circulation have been known to be better for tissue perfusion than non-pulsatile pumps but be detrimental to blood corpuscles. This study is intended to examine the risks and benefits of $T-PLS^{TM}$ through the comparison of clinical effects of $T-PLS^{TM}$ (pulsatile pump) and $Bio-pump^{TM}$ (non-pulsatile pump) used for coronary bypass surgery. Material and Method: The comparison was made on 40 patients who had coronary bypass using $T-PLS^{TM}\;and\;Bio-pump^{TM}$ (20 patients for each) from April 2003 to June 2005. All of the surgeries were operated on pump beating coronary artery bypass graft using cardiopulmonary extra-corporeal circulation. Risk factors before surgery and the condition during surgery and the results were compared. Result: There was no significant difference in age, gender ratio, and risk factors before surgery such as history of diabetes, hypertension, smoking, obstructive pulmonary disease, coronary infarction, and renal failure between the two groups. Surgery duration, hours of heart-lung machine operation, used shunt and grafted coronary branch were little different between the two groups. The two groups had a similar level of systolic arterial pressure, diastolic arterial pressure and mean arterial pressure, but pulse pressure was measured higher in the group with $T-PLS^{TM}\;(46{\pm}15\;mmHg\;in\;T-PLS^{TM}\;vs\;35{\pm}13\;mmHg\;in\;Bio-pump^{TM},\;p<0.05)$. The $T-PLS^{TM}$-operated patients tended to produce more urine volume during surgery, but the difference was not statistically significant $(9.7{\pm}3.9\;cc/min\;in\;T-PLS^{TM}\;vs\;8.9{\pm}3.6\;cc/min\;in\;Bio-pump^{TM},\;p=0.20)$. There was no significant difference in mean duration of respirator usage and 24-hour blood loss after surgery between the two groups. Plasma free Hb was measured lower in the group with $T-PLS^{TM}\;(24.5{\pm}21.7\;mg/dL\;in\;T-PLS^{TM}\;versus\;46.8{\pm}23.0mg/dL\;in\;Bio-pump^{TM},\;p<0.05)$. There was no significant difference in coronary infarction, arrhythmia, renal failure and morbidity rate of cerebrovascular disease. There was a case of death after surgery (death rate of 5%) in the group tested with $T-PLS^{TM}$, but the death rate was not statistically significant. Conclusion: Coronary bypass was operated with $T-PLS^{TM}$ (Pulsatile flow pump) using a heart-lung machine. There was no unexpected event caused by mechanical error during surgery, and the clinical process of the surgery was the same as the surgery for which $Bio-pump^{TM}$ was used. In addition, $T-PLS^{TM}$ used surgery was found to be less detrimental to blood corpuscles than the pulsatile flow has been known to be. Authors of this study could confirm the safety of $T-PLS^{TM}$.

• Journal of Chest Surgery
• /
• v.35 no.7
• /
• pp.523-529
• /
• 2002

Background: Previous reports present that the early results of coronary artery bypass grafting (CABG) has been improving with the accumulation of surgical experience. We conducted a retrospective analysis of the patients who received CABG to evaluate the recent results of CABG. Material and Method: Between January 1996 and August 2001, 154 patients underwent CABG at Hanyang University Hospital. There were 47 patients(group I) who were operated between 1996 and 1998, and 107 patients(group II) who were operated thereafter. The preoperative diagnosis, operative procedure, mortality, and complications were analyzed retrospectively. Result: There were 35 males and 12 females in group I, and 78 males and 29 females in group II, which shows similar ratio of sexes between the two groups. The average age of patients for group I and group II was $55.9{\pm}6.2$ years and $61.0{\pm}8.0$ years, respectively, showing a significant increase in group II(p<0.05). The average left ventricular ejection fraction(LVEF) for group I and group II was $54.6{\pm}11.8$% and $56.9{\pm}13.0$%, respectively. The number of patients who had previous MI in group I and group II were 13 patients(27.7%) and 14 patients(13.1%), respectively, which shows a significant difference (p<0.05). All procedures were performed using the cardiopulmonary bypass(CPB) and moderate systemic hypothermia. Myocardial protection was achieved using intermittent hypothermic ischemia under ventricular fibrillation state or cold crystalloid cardioplegic solution for most of group I patients, whereas cold blood cardioplegic solution was used for group II patients. The mean CPB times for group I and group II were $149.2{\pm}48.7$ minutes and $113.1{\pm}30.6$ minutes, respectively. The mean aortic cross clamp times for group I and group II were $81.3{\pm}26.5$ minutes $72.2{\pm}23.9$ minutes, respectively. These figures show that CPB and aortic cross clamp times were significantly reduced in group II(p<0.05). The use of the left internal thoracic artery(LITA) was increased from 42%(20/47) for group I to 81% (87/107) for group II. The mean number of grafts also significantly increased from $2.5{\pm}0.6$ for group I to $3.0{\pm}1.1$ for group II(p<0.05). Intra-aortic balloon pump(IABP) was applied in 7 cases in group I and 17 cases in group II. Of these, 28.6%(2/7) and 52.9%(9/17) were broadly applied preoperatively in patients with LVEF<40% or congestive heart failure. The operative mortalities for group I and II were 10.6%(5/47) and 0.9%(1/107), respectively, which shows significant decrease for group II(p.0.05). Conclusion: This report suggest that CABG using CPB can recently be performed more safely in virtue of the accumulation of surgical experience with reduction in CPB and aortic cross clamp times and improved surgical techniques and myocardial protection. And we think that the optimal treatment of patients with left ventricular dysfunction associated with congestive heart failure and the extended application of IABP, especially have contributed to the reduction of operative mortality and morbidity.