• Applied Biological Chemistry
• /
• v.38 no.2
• /
• pp.135-140
• /
• 1995

Changes in pH of the soaking solution and physical properties of the soybean curd during immersing in solution of different concentrations at different temperatures were determined. Compared with $0{\sim}3%$ NaCl soaking solution, 5% NaCl soaking solution distinctively reduced the pH drop, increasing rate of turbidity and microorganism growth during storage. This indicated the concentration of soaking solution influences the shelf life of curd. As the storage temperature was lowered to $5^{\circ}C$, their changing rates were also reduced. Physical properties such as initial stress $({\sigma}_0)$, elastic constant (E), viscous constant $({\eta})$ and failure test were influenced by storage temperature, but not a function of concentration of salt solution. The result of the sensory test indicated the hardness and salty taste of curd were statistically significant among samples and $1{\sim}5%$ NaCl solutions did not show any significant difference in the salty taste.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.79-85
• /
• 2016

Recently, visible light communication(VLC) is being actively researched as green wireless communication services are drawing attention. Currently, VLC mostly uses LED for transmission and PD(Photo Diode) for receiving. However, this kind of system has limited applications. Therefore, we design and propose in this paper, a LED-to-LED two way VLC system that doesn't use PD(Photo Diode). This system has the following features and contributions. First, this system uses just LED at both transmitter and receiver with analog switch, Second, this system support both one-way communication and two way communication together. One way communication can support multi-hop communication. The performance evaluation of the proposed system is conducted at a place with standard light. We test the success or failure of one way communication by changing distance and baud rate while test the success and failure of two way communication by changing distance. We expect that the proposed LED-to-LED system in this paper can be applied for various application fields.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.404-417
• /
• 2016

The purpose of this study is to examine the extent to which the deterioration in strength of high strength concrete of 60MPa replaced by a large amount of recycled coarse aggregates (more than 60% to 100% of replacement ratio) could be recovered with steel fiber reinforcement through material compressive strength test and shear failure test on short and middle beams and then to offer useful data for aggregate supply system of a sustainable resource circulation type. This study first examined the results of previous related tests. The results of the material compressive strength tests confirmed that when using a combination of steel fiber reinforcements of volumn ratio 0.75% and high quality recycled coarse aggregates with an water absorption rate within 2.0%, the strength characteristics of high strength concrete of 60MPa level were not only restored to the strength level of concrete made with natural aggregates, but also showed superior ductility. And the shear failure tests on short and middle beams using recycled coarse aggregates more than 60% with shear span to depth ratio (a/d) of 2 and 4 controlled by shear forces mainly confirmed that effects of superior shear strength increase and ductile behavior characteristics were showed by steel fiber reinforcements.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.374-382
• /
• 2020

The purpose of this study is to improve the learning speed of an ammunition stockpile reliability classification artificial neural network model by proposing a normalization method that reduces the number of input variables based on the characteristic of Ammunition Stockpile Reliability Program (ASRP) data without loss of classification performance. Ammunition's performance requirements are specified in the Korea Defense Specification (KDS) and Ammunition Stockpile reliability Test Procedure (ASTP). Based on the characteristic of the ASRP data, input variables can be normalized to estimate the lot percent nonconforming or failure rate. To maintain the unitary hypercube condition of the input variables, min-max normalization method is also used. Area Under the ROC Curve (AUC) of general min-max normalization and proposed 2-step normalization is over 0.95 and speed-up for marching learning based on ASRP field data is improved 1.74 ~ 1.99 times depending on the numbers of training data and of hidden layer's node.

• Journal of the Korea Concrete Institute
• /
• v.16 no.6 s.84
• /
• pp.795-803
• /
• 2004

To prevent the shear failure that occurs abruptly with no sufficient warning, the minimum amount of shear reinforcement should be provided to reinforced concrete(RC) beams. The minimum amount of shear reinforcement of RC beams is influenced by not only compressive strength of concrete but also shear span-to-depth ratio and ratio of tensile longitudinal reinforcement. In this paper, 14 RC beams were tested in order to observe the influences of shear span-to-depth ratio, ratio of tensile longitudinal reinforcement, and compressive strength of concrete. The test results indicated that the rate of shear strength to the diagonal cracking strength of RC beams with the same amount of shear reinforcement increased as the ratio of tensile longitudinal reinforcement increased, while it decreased as the shear span-to-depth ratio increased. The observed test results were compared with the calculated results by the current ACI 318-02 Building Code and the proposed equation.

• Korean Journal of Materials Research
• /
• v.9 no.1
• /
• pp.73-80
• /
• 1999

The effect of alloy compositions of the bond coating on the plasma sprayed-thermal barrier coatings was investigated. The performance of the coating composed of Rene80/NiCrAl/ZrO$_2$-CeO$_2$-Y$_2$O$_3$ and Rene80/CoNiCrAlY/ZrO$_2$-CeO$_2$-Y$_2$O$_3$was evaluated by isothermal and thermal cyclic test in an ambient atmosphere at 115$0^{\circ}C$. The failure of Rene80/NiCrAl/ZrO$_2$-CeO$_2$-Y$_2$O$_3$ coatings was occurred at the bond coating/ceramic coating interface while Rene80/CoNiCrAlY/ZrO$_2$-CeO$_2$-Y$_2$O$_3$ coating was failed at the substrate/bond coating interface after thermal cyclic test. The lifetime of Rene80/NiCrAl/ZrO$_2$-CeO$_2$-Y$_2$O$_3$coatings was longer than Rene80/CoNiCrAlY/ZrO$_2$-CeO$_2$-Y$_2$O$_3$coating. The oxidation rate of the NiCrAl bond coating examined by TGA was lower than CoNiCrAlY bond coatings. In summary, these results suggest that Rene80/CoNiCrAlY/ZrO$_2$-CeO$_2$-Y$_2$O$_3$system as thermal barrier coating be not suitable considering the durability of the coating layer for high temperature oxidation and thermal stress.

• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.50-57
• /
• 2017

Recently, safety-critical aviation system development programs promoted domestically have been terminated in the middle stage or they have not been put to practical use at the final stage. The program failure may be caused by various factors, but this study focused on imperfect test and evaluation(T&E) procedures. In general, T&E process of a safety-critical system must be distributed throughout the entire life-cycle of the system, have a continuity in phases, and can be implemented in a variety of ways depending on the maturity of the system development and acquisition strategy. This paper aims to present a new strategy by analyzing the domestic and overseas T&E processes to reduce the risk of domestic safety-critical CNS/ATM system development program and increase the success rate of program. First, we discuss the verification and validation techniques for safety-critical systems, analyze the T&E procedures of advanced institutes and the domestic situation, and then compare the domestic and overseas T&E processes to complement the imperfect testing procedure.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.3
• /
• pp.340-345
• /
• 2008

Oxidative stress is one of the major causes of failure of in vitro storage of boar semen. Reactive oxygen species (ROS) are one of the important mediators of oxidative stress during in vitro storage of boar semen. Our study examined the effects of taurine on sperm characteristic and on in vitro developmental embryos during in vitro storage of boar semen for 7 days. Semen was randomly aliquoted into 3 centrifuge tubes and treated with different concentrations of taurine (25-100 mM). The characteristics of boar sperm were analyzed for motility by light microscopy, viability by using a Makler counting chamber and membrane integrity by a hypoosmotic swelling test (HOST). The percentages of motile spermatozoa in taurine groups after 5 days were significantly higher compared to the control. Sperm viability in the control was lower than in taurine groups after 7 days irrespective of different taurine concentration. In the hyoosmotic swelling test (HOST), significantly higher results were obtained in taurine groups after 3 days. Also, the developmental rates of IVM/IVF porcine embryos from semen treated with pyruvate and taurine were significantly increased when compared with the control (p<0.05). These results indicate that supplementation of taurine as an antioxidant in boar semen extender can improve the semen quality.

• Journal of Korea Foundry Society
• /
• v.20 no.4
• /
• pp.240-246
• /
• 2000

Surface layer properties such as composition, phase, hardness, and oxide layer condition are very important if the main failure mechanism of metals is wear. Generally, stable and dense oxide layers are known to decrease the wear rate of metals by prohibition of metallic junction occurred between bare metals. Addition of Si above 4 wt% to DCI(Ductile Cast Iron) is reported to enhance the significant oxidation resistance by forming the silicon-rich surface layer which inhibits further oxidation. And addition of up to 2 wt% Mo to high Si ductile iron produces significant increases in high temperature tensile strength, creep strength, thermal fatigue resistance and oxidation resistance. High pressure wear characteristics of unalloyed DCI(Ductile cast Iron), 4.46 wt% Si ductile iron, 4.3 wt% Si-0.52 wt% Mo ductile iron were investigated through unlubricated pin-on-disc wear test. Wear test was carried out at speed of 23m/min, under pressure of 3 MPa and 3.3 MPa. Wear surfaces of each specimen were observed by SEM to determine the wear mechanism under high pressure wear condition. Addition of Si 4.46 wt% severely deteriorated wear property of ductile iron compared to unalloyed DCI. But combined addition of Si 4.3 wt%andMo0.52wt%decreasedthefrictioncoefficient(${\mu}$)ofductileironsandremarkablydelayedthemild-severeweartransition.

• The Korean Journal of Financial Management
• /
• v.25 no.4
• /
• pp.79-116
• /
• 2008

This paper examines and estimates GARCH-VaR models (RiskMetrics, GARCH, IGARCH, GJR and APARCH) with three different distributions such as Gaussian normal, Student-t, Skewness Student-t Distribution using the daily price data from Korean Stock Market during Jan. 1, 1980-Sept. 30, 2004. It also compares them. In-sample test, this finds that for all confidence level as $90%{\sim}99.9%$, the performance and accuracy of IGARCH with ${\lambda}=0.87$ and skewness Student-t distribution are superior to other models and distributions in long position, but GARCH and GJR with Skewness Student-t distribution in short position. For above 99% confidence level, the performance and accuracy of IGARCH with ${\lambda}=0.87$ in both long and short positions are superior to other models and distributions, but Skewness Student-t distribution for long position and Student-t distribution for short position are more accuracy and superior to other distributions. In-out-of sample test, these results also confirm the evidences that the above findings are consistent as well.