• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1414-1419
• /
• 2011

In this paper we study the modeling to quantitatively assess the failure rate of USN system designed for fault-tolerant architecture, aiming at applying the world's best domestic USN technology to safety-critical railways. In order to apply the USN system to the safety-critical field like a train control sector that the failures of controllers may cause severe railway accidents such as train collision and derailment, the quantitative reliability and safety evaluation recommended in IEC 62278 must be preceded. We also develop the evaluation model for overall system failure rate for the distributed network structure, which is the characteristics of USN system. Especially, we allocate reliability targets to component units, and present an availability evaluation plan through the plan on the quantitative achievement of failure rate for sensor nodes, gateways, radio-communication network and servers, along with the failure rate model of the overall system considering network operational features.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.310-315
• /
• 2003

This paper presents the effect of boundary condition of failure pressure model for buried pipelines on failure prediction by using a failure probability model. The first order Taylor series expansion of the limit state function is used in order to estimate the probability of failure associated with various corrosion defects for long exposure periods in years. A failure pressure model based on a failure function composed of failure pressure and operation pressure is adopted for the assessment of pipeline failure. The effects of random variables such as defect depth, pipe diameter, defect length, fluid pressure, corrosion rate, material yield stress, material ultimate tensile strength and pipe thickness on the failure probability of the buried pipelines are systematically studied by using a failure probability model for the corrosion pipeline.

• 융합보안논문지
• /
• 제13권1호
• /
• pp.3-10
• /
• 2013

본 연구에서는 소프트웨어 제품 테스팅 과정에서 관측고장시간에 근거한 결함 발생률을 고려한 소프트웨어 신뢰성 모형에 대하여 연구 하였다. 신뢰성 분야에서 많이 사용되는 S-분포모형을 이용한 새로운 결함 확률을 추가한 문제를 제시하였다. 수명분포는 유한고장 비동질적인 포아송과정을 이용하였다 본 논문의 결함 발생률을 고려한 소프트웨어 고장 자료 분석에서는 고장 시간 자료를 적용하였으며 모수추정 방법은 최우추정법을 이용하여 결함 발생 확률에 대한 관계와 신뢰도를 추정 하였다.

• 융합정보논문지
• /
• 제12권5호
• /
• pp.15-20
• /
• 2022

본 연구는 소프트웨어 품질 특성인 기능적합성, 신뢰성, 사용성, 이식성, 유지보수성, 성능효율성, 보안성, 호환성 중에서 신뢰성에 대한 평가 방안을 연구하였다. 소프트웨어 품질 측정에 있어 신뢰성의 정량적 평가 방안을 제시한다. 본 연구는 소프트웨어 품질 특성 중 하나인 신뢰성 평가 중 성숙성에 포함되는 고장률을 측정하는 방법에 대해서 소개하고 고장 데이터의 형태에 따라 고장률이 어떻게 변화하는지에 대해 실험데이터를 가지고 연구한 내용이다. 소프트웨어 테스팅을 중심으로 매일의 고장 수를 중심으로 소프트웨어 신뢰성 성장 모델에 적용하여 고장률을 측정하여 고장 데이터의 형태에 따라 비교 분석하였다. 6일간의 테스트를 통해서 발견된 고장 시간을 중심으로 고장률을 측정하고 측정결과를 이용해서 국제표준 ISO/IEC 25023에서 제시하고 있는 고장률과 비교 하였으며 데이터 형태에 따라 적용방안을 검토하였다.

• 품질경영학회지
• /
• 제31권3호
• /
• pp.185-192
• /
• 2003

In this paper, the properties on the optimal replacement policies for the general failure model are developed. In the general failure model, two types of system failures may occur : one is Type I failure (minor failure) which can be removed by a minimal repair and the other, Type II failure (catastrophic failure) which can be removed only by complete repair. It is assumed that, when the unit fails, Type I failure occurs with probability 1-p and Type II failure occurs with probability p, $0\leqp\leq1$. Under the model, the system is minimally repaired for each Type I failure, and it is repaired completely at the time of the Type II failure or at its age T, whichever occurs first. We further assume that the repair times are non-negligible. It is assumed that the minimal repair times in a renewal cycle consist of a strictly increasing geometric process. Under this model, we study the properties on the optimal replacement policy minimizing the long-run average cost per unit time.

• 한국항공운항학회지
• /
• 제18권4호
• /
• pp.38-43
• /
• 2010

A continuing challenge in the aviation industry is how to safely keep aircraft in service longer with limited maintenance budgets. Therefore, all the advanced countries in aircraft technologies put great efforts in prediction of failure rate in parts and system, but in the domestic aircraft industry is lack of theoretical and experimental research. Prediction of failure rate provides a rational basis for design decisions such as the choice of part quality levels and derating factors to be applied. For these reasons, analytic prediction of failure rate is essential process in developing aircraft structure. In this paper, a procedure for prediction of failure rate for aircraft structural parts is presented. Cargo door kinematic parts are taken to illustrate the process, in which the failure rate for Hook part is computed by using Monte Carlo Simulation along with Response Surface Model, and system failure rate is obtained afterwards.

• Journal of the Korean Data and Information Science Society
• /
• 제14권4호
• /
• pp.997-1005
• /
• 2003

In this paper, the problem of determining optimal burn-in time is considered under a general failure model. There are two types of failure in the general failure model. One is Type I failure (minor failure) which can be removed by a minimal repair and the other is Type II failure (catastrophic failure) which can be removed only by a complete repair. In this model, when the unit fails at its age t, Type I failure occurs with probability 1 - p(t) and Type II failure occurs with probability p(t), $0{\leq}p(t)\leq1$. Under the model, the properties of optimal burn-in time maximizing mean time to the catastrophic failure during field operation are obtained. The obtained results are also applied to some illustrative examples.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권6호
• /
• pp.12-19
• /
• 2003

This paper presents the effect of boundary conditions in various failure pressure models published for the estimation of failure pressure. Furthermore, this approach is extended to the failure prediction with the aid of a failure probability model. The first order Taylor series expansion of the limit state function is used in order to estimate the probability of failure associated with each corrosion defect in buried pipelines for long exposure period with unit of years. A failure probability model based on the von-Mises failure criterion is adapted. The log-normal and standard normal probability functions for varying random variables are adapted. The effects of random variables such as defect depth, pipe diameter, defect length, fluid pressure, corrosion rate, material yield stress, material ultimate tensile strength and pipe thickness on the failure probability of the buried pipelines are systematically investigated for the corrosion pipeline by using an adapted failure probability model and varying failure pressure model.

• 품질경영학회지
• /
• 제17권2호
• /
• pp.17-26
• /
• 1989

This paper is concerned with forecasting the existing number of errors in the computer software and optimizing the stopping time of the software test based upon the forecasted number of errors. The most commonly used models have assessed software reliability under the assumption that the software failure late is proportional to the current fault content of the software but invariant to time since software faults are independents of others and equally likely to cause a failure during testing. In practice, it has been observed that in many situations, the failure rate decrease. Hence, this paper proposes a mathematical model to describe testing situations where the failure rate of software limearly decreases proportional to testing time. The least square method is used to estimate parameters of the mathematical model. A cost model to optimize the software testing time is also proposed. In this cost mode two cost factors are considered. The first cost is to test execution cost directly proportional to test time and the second cost is the failure cost incurred after delivery of the software to user. The failure cost is assumed to be proportional to the number of errors remained in the software at the test stopping time. The optimal stopping time is determined to minimize the total cost, which is the sum of test execution cast and the failure cost. A numerical example is solved to illustrate the proposed procedure.

• 품질경영학회지
• /
• 제25권4호
• /
• pp.71-78
• /
• 1997

In this paper, we consider a hierarchical Bayes estimation of the parameter, the reliability and failure rate functions based on type-II censored samples from a Burr type-？ failure time model. The Gibbs sampler a, pp.oach brings considerable conceptual and computational simplicity to the calculation of the posterior marginals and reliability. A numerical study is provided.