• 조명전기설비학회논문지
• /
• 제25권1호
• /
• pp.101-106
• /
• 2011

The failure of cooling system in Superconducting Fault Current Limiter(SFCL) increases the impedance of superconducting device, and due to malfunction of inner switches the SFCL opens the distribution system inadvertently when required to do so. In this paper, the ground fault and short circuit fault were classified as active failure and the open circuit fault was passive failure. A reliability model of SFCL considers the passive failure as well as active failure, and in the case study the reliability indices of distribution system are evaluated. It is possible that the reliability evaluation excluded passive failure makes the customers reliability seem so worse than it really was. Therefore, the reliability models of SFCL must include the active failure and passive failure together to evaluate the reliability of distribution system connected SFCL.

• Structural Engineering and Mechanics
• /
• 제9권2호
• /
• pp.111-126
• /
• 2000

Truss type structures are attractive to a variety of engineering applications on earth as well as in space due to their high stiffness to mass ratios and ease of construction and fabrication. During the service life, an individual member of a truss structure may lose load carrying capacity due to many reasons, which may lead to collapse of the structure. An analytical and computational procedure has been developed to study the response of truss structures subject to member failure under static and dynamic loadings. Emphasis is given to the dynamic effects of member failure and the propagation of local damage to other parts of the structure. The methodology developed is based on nonlinear finite element analysis technique and considers elasto-plastic material nonlinearity, postbuckling of members, and large deformation geometric nonlinearity. The pseudo force approach is used to represent the member failure. Results obtained for a planar nine-bay indeterminate truss undergoing sequential member failure show that failure of one member can initiate failure of several members in the structure.

• 한국국방경영분석학회지
• /
• 제25권2호
• /
• pp.144-157
• /
• 1999

In this paper, we consider a new preventive replacement policy for the system which deteriorates while it is in operation with an increasing failure rate. The system is subject to two types of failure. A type 1 failure is repairable while a type 2 failure is not repairable. In the new policy, a system is replaced at the age of $t_p$ or at the instant the$\textsc{k}^{th}$ type 1 failure occurs, whichever comes first. However, if a type 2 failure occurs before a preventive replacement is performed, a failure replacement should be made. We assume that a type 1 failure can be rectified with a minimal repair. We also assume that a replacement takes a non-negligible amount of time while a minimal repair takes a negligible amount of time. Under a cost structure which includes a preventive replacement cost, a failure replacement cost and a minimal repair cost, we develop a model to find the optimal ($\textsc{k},t_p$) policy which minimizes the expected cost per unit time in the long run while satisfying a system availability constraint.

• Journal of Chest Surgery
• /
• 제14권4호
• /
• pp.319-323
• /
• 1981

To clarify the clinical spectrum of non-oliguric acute renal failure, we undertook a retrospective study of 16 cases of acute renal failure following trauma and surgery, 6 of whom were non-oliguric throughout their periods of azotemia. With the clinical symptoms, BUN, creatinine and some urinary diagnostic indexes, we analyzed the differences between non-oliguric and oliguric renal failure. And the results were: 1. The nonoliguric form [10 cases] was more common than oliguric [6 cases], especially post-traumatic failure. 2. The both types belonged to parenchymal renal failure by the U/P UN ratio and urinary Na concentration [Vertal, 1967]. 3. The non-oliguric form was lesser severe in urinary diagnostic indexes and clinically. The non-oliguric renal failure has better clinical course and prognosis, the failure to diagnose it is as dangerous as the failure oliguric renal failure.

• 대한기계학회논문집
• /
• 제18권1호
• /
• pp.127-138
• /
• 1994

The application of fault tree technique to the analysis of compressor failure is considered. The techniques involve the decomposition of the system into a form of fault tree where certain basic events lead to a specified top event which signifies the total failure of the system. In this paper, fault trees are made by using fault train of screw type air compressor failure. The fault trees are used to obtain minimal cut sets from the modes of system failure and, hence the system failure rate for the top event can be calculated. The method of constructing fault trees and the subsequent estimation of reliability of the system is illustrated through compressor failure. It is proved that FTA is efficient to investigate the compressor failure modes and diagnose system.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권4호
• /
• pp.305-315
• /
• 2017

Purpose: The purpose of this research is to propose procedure and methodology for developing failure rate databook which is suitable for Korean operation environment. Methods: To this end, we investigate failure databooks used in foreign countries and study the procedure and methodology for collecting failure data, organizing the data, estimating failure rate and summarizing results. Results: We develop the procedure of development of failure databook, the items for data collection, database schema of part details and part summary and contents of failure databook by considering the application environment in Korea. Conclusion: The results of our research could be utilized for the development of Korean failure rate databook and research of reliability prediction model and could ultimately contribute to improve the accuracy of reliability prediction.

• 한국컴퓨터정보학회논문지
• /
• 제24권4호
• /
• pp.107-112
• /
• 2019

Failure testing is a test that verifies that the system is operating in accordance with failure response requirements. A typical failure test approaches the operating system by identifying and testing system problems caused by unexpected errors during the operational phase. In this paper, we study how to evaluate these Failure at the software development stage. Evaluate the probability of failure due to code changes through the complexity and duplication of the code, and evaluate the probability of failure due to exceptional situations with bugs and test coverage extracted from static analysis. This paper studies the possibility of failure based on the code quality of software development stage.

• 한국지반신소재학회논문집
• /
• 제9권3호
• /
• pp.19-27
• /
• 2010

본 연구에서는 제주도 현무암에 대한 삼축압축시험을 실시하고 Lade(1977)의 3차원 파괴규준을 적용하여 강도정수를 산정하였다. 그리고 3차원 파괴규준에 의해 산정된 강도정수와 파괴면의 특성을 살펴보고, Mohr-Coulomb의 파괴규준으로 산정한 전단강도정수와 비교검토하였다. 삼축압축시험결과를 토대로 Lade(1977)의 3차원 파괴규준을 이용하여 파괴시의 ($I_1^3/I_3-27$)과 ($P_a/I_1$) 관계로부터 매개변수인 ${\eta}_1$ 및 m을 구하였다. 3차원 파괴면을 나타내는 정팔면체 평면에서 조면암질 현무암의 파괴면이 가장 크고 스코리아가 가장 작으며, 단면형상은 조면암질 현무암이 가장 삼각형에 가깝고 스코리아가 가장 원형에 가까운 것으로 나타났다. 정팔면체 평면에서 삼축실험결과와 Lade의 파괴포락선 및 Mohr-Coulomb의 파괴포락선을 비교한 결과 높은 응력하에서는 Lade의 파괴규준이 실험치와 일치하며, 낮은 응력하에서는 Mohr-Coulomb의 파괴규준이 실험치와 일치하는 것으로 나타났다. 그리고 Lade의 3차원 파괴면은 Mohr-Coulomb의 3차원 파괴면보다 크며, 이는 Lade의 파괴규준으로 산정된 전단강도정수가 Mohr-Coulomb의 파괴규준으로 구한 것 보다 더 크게 산정됨을 의미한다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.303-308
• /
• 2004

The failure at the head section of rubble mound breakwaters is more important than other failure modes. because this initial failures will occur the failure of the trunk section and lead to the instability of the structure. The three-dimensional failure modes are discussed using the experimental data with multi-directional waves considering the failure modes. It was occurred by the topographical characteristics around the head of rubble mound breakwater. The spacial characteristics of failure mode around the rubble-mound structures can be summarized as follows: 1) It was clarified that the failure modes at the round head of a detached breakwater are classified as failure by plunging breaker on the slope, failure by direct incident wave force and failure at the rubble mound breakwaters. 2) The failure mode was found in the lower wave height than the design wave by the breaker depth effects and topography around structures. It is clarified that the structure was monitored safely designed for the design wave but the failure was occurred by the reason of breaker waves.

• 한국추진공학회지
• /
• 제1권1호
• /
• pp.111-121
• /
• 1997

본 연구에서는 탄소/에폭시 복합재료의 기계적 결합부위의 결합강도 예측을 위한 구조해석과 실험을 수행하였다. 복합재료 구조물의 Joint설계에 있어 베어링 파괴는 대단히 중요한 파괴형태 중하나이다. 그래서 본 연구에서는 베어링 파괴를 해석적으로 예측하고 실험적으로 확인하였다. 순수인장 파괴(Net Tension Failure)와 베어링 파괴(Bearing Failure) 실험을 위해서 각각 두 가지 형상의 시편을 선택하였다. 기계적 결합강도 예측에 사용된 방법은 특성길이(Characteristic Length)법과 연관시킨 Yamada-Sun 파괴기준(Failure Criterion)과 Tsai-Hill 최대일 이론이다. 그리고 인장특성길이와 압축특성길이는 실험을 통하여 얻어지며, 특히 압축특성길이 결정은 최근에 착안된 베어링파괴 실험으로부터 결정하였다. 위와 같은 예측 방법을 준등방성(Quasi-Isotropic) Carbon/Epoxy HT245/RS3232에 적용하였다. 연구결과, 이론적인 복합재료 파괴예측이 실험결과와 잘 일치함을 확인할 수 있었다.