• Economic and Environmental Geology
• /
• v.52 no.1
• /
• pp.107-118
• /
• 2019

Two assertions about the process the formation of the high-purity limestone in the Taebaeksan Basin, categorized into syngenetic and epigenetic origin, are verified on the basis of its oxygen-carbon stable isotopic characteristics. The carbonate rocks sampled from the selective six high-purity limestone mines and several outcrops in the Daegi formation are featured by various colors such as the gray, light gray and dark gray. They show a wide range of oxygen stable isotope ratios (4.5 ~ 21.6 ‰), but a narrow range of carbon stable isotope ratios (-1.1 ~ 0.8 ‰, except for vein calcite), which means that they had not experienced strong hydrothermal alteration. In addition, there is no difference in the range of the oxygen stable isotope ratios by mine and color, and it is similar to the range from surrounding outcrop samples. These results indicate that the effect of the hydrothermal alteration were negligible in the generation of high-purity limestone in deposit scale. Whereas, the carbonate rocks can be divided texturally into two groups on the basis of an oxygen isotope ratio; the massive-textured or well-layered samples (>15 ‰), and the layer-disturbed (or layer-destructed) and showing over two colors in one sample (<15 ‰). In the multi-colored samples, the bright parts are characterized by the very low oxygen stable isotope ratios, compared to the dark parts, implying the increase in brightness of the carbonate rocks could be induced by the interaction between hydrothermal fluid and rock. However, these can be applied in a small scale such as one sample and are not suitable for interpretation of the generation of high-purity limestone as a deposit scale. In particular, the high oxygen isotope ratios from the recrystallized white limestone suggest that hydrothermal fluids are also rarely involved during recrystallization process. In addition, the occurrences of the high-purity limestone orebody strongly support the high-purity limestone in the area are syngenetic rather than epigenetic; the high-purity limestone layers in the area show continuous and almost horizontal shapes, and is intercalated between dolomite layers. Consequently, the overall reinterpretation based on the sequential stratigraphy over the Taebaeksan basin would play an important role to find additional reserves of the high-purity limestone.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.41-50
• /
• 2006

It is generally regarded a design system in post-industrial society, which products designed by in-house designers or design consultancy are manufactured in factory and distributed in market for the consumer. Although it is treated an old design system in traditional society, the traces of vernacular design has been remaining in the state of adopted to the periodical needs in these days, also proving the attribute of design culture to constitute human's material environment as well as existing design systems. There were discovered various design artifacts in daily surroundings vary from the established design in several manners, user modifications or manufactures in everyday lives formalized them. It was approached a case study that analyze the changes of artifact configuration and designer/user context and creation process of the non-professional design artifacts, Creativity Template Theory and ACM(Artifact Context Model) have been utilized for the analysis model. From the analysis result, It assume that the everyday artifacts may be ordinary but extra-ordinary including particular ideas and identity represented by everyday designers or users. Beside these characteristics induce the potentiality that reflect on creative motives for the designers or a complementary artifact generator filling up with drawbacks in established design system. The everyday design domain, various explorations and alternatives are made, is seems to be another design practice domain dissimilar to the one in the industry-based design. Moreover it provides an more easily accessability for the approaching user-friendly design, user customization because they conduct the reliable modeling of consumer and end-user. Finally, based on the exploratory study regarding interpretation of context and configuration in the everyday artifacts, new approach for the design process and design education through more detailed cognitive modeling of everyday designers will be a further study.

• Management & Information Systems Review
• /
• v.36 no.3
• /
• pp.131-150
• /
• 2017

The purpose of this study is to observe the spread pattern of open source software (OSS) while establishing relations with surrounding actors during its operation period. In order to investigate the change pattern of participants in the OSS, we use a netnography on the basis of online data, which can trace the change patterns of the OSS depending on the passage of time. For this, the cases of three OSSs (e.g. jQuery, MooTools, and YUI), which are JavaScript frameworks, were compared, and the corresponding data were collected from the open application programming interface (API) of GitHub as well as blog and web searches. This research utilizes the translation process of the actor-network theory to categorize the stages of the change patterns on the OSS translation process. In the project commencement stage, we identified the type of three different OSS-related actors and defined associated relationships among them. The period, when a master commences a project at first, is refined through the course for the maintenance of source codes with persons concerned (i.e. project growth stage). Thereafter, the period when the users have gone through the observation and learning period by being exposed to promotion activities and codes usage respectively, and becoming to active participants, is regarded as the 'leap of participants' stage. Our results emphasize the importance of promotion processes in participants' selection of the OSS for participation and confirm the crowding-out effect that the rapid speed of OSS development retarded the emergence of participants.

• Korean Journal of Health Education and Promotion
• /
• v.10 no.1
• /
• pp.34-60
• /
• 1993

This study was done for the improvement of dental health of rural villagers and the dental health education, through finding of the types of brushing teeth and dental treatment of 812 people in Sunsan, Kyungpook province for 35days from March 27 to April 30 in 1992. Summaries are as follows ; 1. 58.5 percent of respondents were women, 56.3 percent were 40′s, 28.0 percent were 30′s, 12.3 percent were 50′s, and the over 60′s were 3.4 percent Elementary school graduates were 36.1 percent and most of them were middle school graduates, 33.5 percent. In view of the occupation, farmers were 56.5 percent, factory workers were 17.9 percent, the middle class (monthly pay amounting to 500,000∼990,000 won) were 49 percent and the lower class(less than 500,000 won) were 30.9 percent. In the standpoint of religion, Buddhists were 42.5 percent. 2. In the number and times of respondents brushing, 35.5 percent is "after dinner", 25.6 percent is "Before going to bed", 15.8 percent is "After breakfast", 13.3 percent is "After every meal", 5.2 percent is "Before breakfast" and 4.7 percent is "The sometimes it occurs to them". 3. The acquirement process of knowledge on the dental health were clinics or health center dentists (27.6%), TV(24.5%), magazine(9.2%), school(7.8%), relatives(5.3%). and 25.6 percent has never acquired. 28.3 percent of the farmers learned something by clinics and 28.1 percent of them haven′t heard about dental health. 4. The rate of persons who experienced oral diseases during 1 year period was 76.1 percent, and that of the educated was 19.9 percent and that of the uneducated 80.1 percent. The authorities concerned with treatment were dentist′s(41.6%), health center(30.3%), and the unlicensed person(2.9%). The rate of negligence was 6.3 percent, farmers experienced oral disease was 75.2 percent and they utilized the health center most often(36.2%). 5. The rate of person who had experienced dental prosthesis during ten year period was 71.9 percent, and the final place or man for dental prosthesis was dental clinic(59.4%), the unlicensed person(27.1%), and health center(13.5%). The rate of farmers experienced dental prosthesis was 70.4 percent. They utilized the dental clinic, the unlicensed person and the health center with the rates of 51.5 percent, 32.2 percent, and 16.7 percent respectively. 6. As to the results of dental prosthesis using the dental clinic, "being satisfied now" was 72.4 percent, "being dissatisfied" 14.4 percent, "being unable to use it" 3.1 percent, "its being somewhat usable" 10.1 percent, "having some problem" 38.7 percent, and "there being no problems" 61.3 percent. About utilizing the unlicensed person, "being satisfied now" was 65.8 percent, "being dissatisfied" was 10.7 percent, "being unable to use it" 5.1 percent and "its being some what usable" was 18.4 percent. 7. The rate of missing teeth holders amounted to 89.8 percent, the rate of the educated to the uneducated was 19.2 percent to 80.8 percent The reasons of neglecting that illness were due to "Endurable"(28.3%), and "No money" (24.3%). In the case of farmers 89.1 percent of them were the missing-teeth holders, the "Endurable" were 29.8 7. percent, and "No money" lay in 27.4 percent. 8. Their hopeful centers for dental prosthesis were the dental clinics(76.6%), and the health center(16.9%).

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.3
• /
• pp.95-111
• /
• 2004

This research sought to determine the status of the installation and operation of composting facilities of domestic public resource-making facilities and come up with corresponding improvement measures. The composting facilities were the most extensively installed of related facilities with over a 0.5 ton treated volume per day. The monthly and yearly carry-in volume of food waste were found to stand at 1,101.7 tons per day and 930.9 tons per day, thus falling short of the average planned volume of 1,270.9 tons. Many composting facilities, which were installed in areas for which factory registration were not approved, did not get approvals. Composting facilities underwent operation stoppage mainly due to faulty fermentation and crushing equipment. Mainly metals contained in food waste caused faults to the crushing equipment, thus requiring a facility designing against faults and corrosion. The initial water content was found to stand at 50-60%, thus complying with the requirement. However, since the composting food waste had an appropriate mixture of sawdust, food waste, and returned compost, it should meet the initial conditions. For fermentation facilities, the duration time for fermentation was 15 days, and post-fermentation tanks required 21 days of duration time, thus establishing the minimum criteria. However, some facilities did not meet the requirements, taking more time in decomposition, thus suggesting a need to determine the duration time according to facilities. In composting food waste, microorganism-based thermal oxidizer-operated fermentation tanks should be used to ensure an economic operation. On the contrary, 14 out of 25 survey targets heated fermentation tanks in any form. These thermal facilities contain the growth of bacteria, lowering chemical reaction in composting; thus composting facilities should be basically designed to use microorganism-based thermal oxidizers in drying water. An average daily volume of food waste and supplementary materials that was injected in producing compost was 22.8 tons. This volume produced 7.3 tons of compost per day, decreasing 68%. Properties of produced compost were analyzed by its color, absence or presence of remaining decomposition heat, and smell, to assess the quality. As a result, the composting process was not properly installed nor operated in about 50% of composting facilities. Compost should be produced to be soil-friendly.

• Journal of Nutrition and Health
• /
• v.41 no.5
• /
• pp.439-447
• /
• 2008

There is a limitation to estimate vitamin $B_{12}$ intake due to lack of data on vitamin $B_{12}$ content in many Korean foods. In this study, vitamin $B_{12}$ content was determined in some soybean or vegetable-fermented foods, edible seaweeds and other frequently consumed foods in Korea by microbioassay using Lactobacillus delbruecki ATCC 7830. The traditional type of Doenjang and Chungkookjang contained 1.85 ${\mu}g/100$ g and 0.69 ${\mu}g/100$ g of vitamin $B_{12}$, respectively, while the factory-type of Doenjang and Chungkookjang contained 0.04-0.86 ${\mu}g/100$ g and 0.06-0.15 ${\mu}g/100$ g. Vitamin $B_{12}$ was not detected in steamed soybeans and Tofu which is a not-fermented soybean product, indicating that vitamin $B_{12}$ in Doenjang and Chungkookjang might be produced during the fermentation process. The Korean-style soy sauce contained 0.04 ${\mu}g$ vitamin $B_{12}$/100 mL, but vitamin $B_{12}$ was not detected in Japanese-style soy sauce and white miso. Commercial Kimchi, a representative Korean vegetable- fermented food, made of Korean cabbage, Yeolmu, or Mustard leaves contained 0.013-0.03 ${\mu}g$ vitamin $B_{12}$/100 g, while Kimchi without red pepper and fermented fish sauce (White Kimchi) did not. Vitamin $B_{12}$ content was very high in some edible seaweeds such as laver (66.76 ${\mu}g/100$ g dry weight) and sea lettuce (84.74 ${\mu}g/100$ g dry weight), and it was 17.12 ${\mu}g/100$ g of dried small anchovy, 1.07 ${\mu}g/100$ g of whole egg, and 0.02 ${\mu}g/100$ g of coffee mix. From these results, it is assumed that Koreans take substantial amount of vitamin $B_{12}$ from plant-origin foods. And, with these data, we will be able to calculate dietary vitamin $B_{12}$ content more correctly than before. In conclusion, soybean-fermented foods, Kimchi, laver and sea lettuce are recommendable as good sources of vitamin $B_{12}$ for vegetarians or Korean elderly on grain and vegetable based diet.

• KDI Journal of Economic Policy
• /
• v.13 no.4
• /
• pp.91-116
• /
• 1991

Market liberalization progressing simultaneously with high and rapidly rising domestic wages has created an adverse business environment for domestic firms. Korean firms are losing their international competitiveness in comparison to firms from LDC(Less Developed Countries) in low-tech industries. In high-tech industries, domestic firms without government protection (which is impossible due to the liberalization policy and the current international status of the Korean economy) are in a disadvantaged position relative to firms from advanced countries. This paper examines the division of roles between the private sector and the government in order to achieve a successful structural adjustment, which has become the impending industrial policy issue caused by high domestic wages, on the one hand, and the opening of domestic markets, on the other. The micro foundation of the economy-wide structural adjustment is actually the restructuring of business portfolios at the firm level. The firm-level business restructuring means that firms in low-value-added businesses or with declining market niches establish new major businesses in higher value-added segments or growing market niches. The adjustment of the business structure at the firm level can only be accomplished by accumulating firm-specific managerial assets necessary to establish a new business structure. This can be done through learning-by-doing in the whole system of management, including research and development, manufacturing, and marketing. Therefore, the voluntary cooperation among the people in the company is essential for making the cost of the learning process lower than that at the competing companies. Hence, firms that attempt to restructure their major businesses need to induce corporate-wide participation through innovations in organization and management, encourage innovative corporate culture, and maintain cooperative labor unions. Policy discussions on structural adjustments usually regard firms as a black box behind a few macro variables. But in reality, firm activities are not flows of materials but relationships among human resources. The growth potential of companies are embodied in the human resources of the firm; the balance of interest among stockholders, managers, and workers of the company' brings the accumulation of the company's core competencies. Therefore, policymakers and economists shoud change their old concept of the firm as a technological black box which produces a marketable commodities. Firms should be regarded as coalitions of interest groups such as stockholders, managers, and workers. Consequently the discussion on the structural adjustment both at the macroeconomic level and the firm level should be based on this new paradigm of understanding firms. The government's role in reducing the cost of structural adjustment and supporting should the creation of new industries emphasize the following: First, government must promote the competition in domestic markets by revising laws related to antitrust policy, bankruptcy, and the promotion of small and medium-sized companies. General consensus on the limitations of government intervention and the merit of deregulation should be sought among policymakers and people in the business world. In the age of internationalization, nation-specific competitive advantages cannot be exclusively in favor of domestic firms. The international competitiveness of a domestic firm derives from the firm-specific core competencies which can be accumulated by internal investment and organization of the firm. Second, government must build up a solid infrastructure of production factors including capital, technology, manpower, and information. Structural adjustment often entails bankruptcies and partial waste of resources. However, it is desirable for the government not to try to sustain marginal businesses, but to support the diversification or restructuring of businesses by assisting in factor creation. Institutional support for venture businesses needs to be improved, especially in the financing system since many investment projects in venture businesses are highly risky, even though they are very promising. The proportion of low-value added production processes and declining industries should be reduced by promoting foreign direct investment and factory automation. Moreover, one cannot over-emphasize the importance of future-oriented labor policies to be based on the new paradigm of understanding firm activities. The old laws and instititutions related to labor unions need to be reformed. Third, government must improve the regimes related to money, banking, and the tax system to change business practices dependent on government protection or undesirable in view of the evolution of the Korean economy as a whole. To prevent rational business decisions from contradicting to the interest of the economy as a whole, government should influence the business environment, not the business itself.

• Journal of Intelligence and Information Systems
• /
• v.24 no.4
• /
• pp.137-154
• /
• 2018

Animal infectious diseases, such as avian influenza and foot and mouth disease, occur almost every year and cause huge economic and social damage to the country. In order to prevent this, the anti-quarantine authorities have tried various human and material endeavors, but the infectious diseases have continued to occur. Avian influenza is known to be developed in 1878 and it rose as a national issue due to its high lethality. Food and mouth disease is considered as most critical animal infectious disease internationally. In a nation where this disease has not been spread, food and mouth disease is recognized as economic disease or political disease because it restricts international trade by making it complex to import processed and non-processed live stock, and also quarantine is costly. In a society where whole nation is connected by zone of life, there is no way to prevent the spread of infectious disease fully. Hence, there is a need to be aware of occurrence of the disease and to take action before it is distributed. Epidemiological investigation on definite diagnosis target is implemented and measures are taken to prevent the spread of disease according to the investigation results, simultaneously with the confirmation of both human infectious disease and animal infectious disease. The foundation of epidemiological investigation is figuring out to where one has been, and whom he or she has met. In a data perspective, this can be defined as an action taken to predict the cause of disease outbreak, outbreak location, and future infection, by collecting and analyzing geographic data and relation data. Recently, an attempt has been made to develop a prediction model of infectious disease by using Big Data and deep learning technology, but there is no active research on model building studies and case reports. KT and the Ministry of Science and ICT have been carrying out big data projects since 2014 as part of national R &D projects to analyze and predict the route of livestock related vehicles. To prevent animal infectious diseases, the researchers first developed a prediction model based on a regression analysis using vehicle movement data. After that, more accurate prediction model was constructed using machine learning algorithms such as Logistic Regression, Lasso, Support Vector Machine and Random Forest. In particular, the prediction model for 2017 added the risk of diffusion to the facilities, and the performance of the model was improved by considering the hyper-parameters of the modeling in various ways. Confusion Matrix and ROC Curve show that the model constructed in 2017 is superior to the machine learning model. The difference between the2016 model and the 2017 model is that visiting information on facilities such as feed factory and slaughter house, and information on bird livestock, which was limited to chicken and duck but now expanded to goose and quail, has been used for analysis in the later model. In addition, an explanation of the results was added to help the authorities in making decisions and to establish a basis for persuading stakeholders in 2017. This study reports an animal infectious disease prevention system which is constructed on the basis of hazardous vehicle movement, farm and environment Big Data. The significance of this study is that it describes the evolution process of the prediction model using Big Data which is used in the field and the model is expected to be more complete if the form of viruses is put into consideration. This will contribute to data utilization and analysis model development in related field. In addition, we expect that the system constructed in this study will provide more preventive and effective prevention.