• Journal of the Korea Society for Simulation
• /
• v.13 no.3
• /
• pp.1-10
• /
• 2004

The cell loss probability required in the ATM network is in the range of 10$^{-9}$ ∼10$^{-12}$ . If Monte Carlo simulation is used to analyze the performance of the ATM node, an enormous amount of computer time is required. To obtain large speed-up factors, importance sampling may be used. Since the Markov-modulated processes have been used to model various high-speed network traffic sources, we consider discrete time single server queueing systems with Markov-modulated arrival processes which can be used to model an ATM node. We apply importance sampling based on the Large Deviation Theory for the performance evaluation of, MMBP/D/1/K, ∑MMBP/D/1/K, and two stage tandem queueing networks with Markov-modulated arrival processes and deterministic service times. The simulation results show that the buffer overflow probabilities obtained by the importance sampling are very close to those obtained by the Monte Carlo simulation and the computer time can be reduced drastically.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.3
• /
• pp.191-204
• /
• 2013

In this paper, we investigated the correlation outputs of Daejeon correlator at the viewpoints of the buffer memory setting related to the fine delay tracking and the under/overflow issue in FFT modules, in order to eliminate DC-like component and phase concentration to 0 degree. As the ring buffer memory is being used for the fine delay tracking, the DC-like component in correlation outputs is generated by improper setting of data read/write address, and then that address setting method is modified to exclude a polluted FFT segment in correlation processing when crossing the port/stream boundary. The phase concentration to 0 degree at beginning of bandpass is caused by inadequate scaling factors, which may be the origins of under/overflow occurred at internal computation of FFT stage. With the revised method of the ring buffer memory setting and the scaling factors in FFT, we could obtain higher signal-to-noise ratio and flux density, compared to the previous method, through the correlation processing of true observational data.

• Journal of Environmental Health Sciences
• /
• v.22 no.1
• /
• pp.45-50
• /
• 1996

The application of HACCP system, which was adopted by Codex Alimentarius Committee for the safe meat and poultry production, is one of the urgent task for competing in the world trade markets. But there have been no useful analytical studies to identify the causes of contamination in the poultry meat processing plants in Korea. This study was conducted to investigate the potential hazards during the operations by the microbiological examination for the poultry meat processing plant (20,000 birds capacity a day) located in Kangwon province. In spite of air contamination of work places, it may not directly affect the surface contamination of poultry meats. But the risk of Campylobacter jejuni/coli contamination was high. The number of total count was decreased about ten times, but remarkable changes of microbial contamination could not be recognized in each procedure during the operations. The washing water was already contaminated as much as $10^{3-6}CFU/ml$ in SPC before the operations. It means that to keep water tanks hygienic is a primary step to prevent the occurrences of microbial contamination. The overflow and recirculation of water in scalding, washing, and chilling was aslo an important factor for a hygienic control. Based on this study, the followings could be regarded as an important factors for hygenic control in the poultry slaughtering plants on a small scale. The temperature of water used for scalding should be constantly maintained on a required temperature, and the overflow rate of 1~1.5 liter per bird. The carcass surface and the body cavity should be washed thoroughly and the cross-contamination due to facilities, workers, and tools should be prevented. The chilling water sholud be maintained under 5$\circ$C of temperature with ice and overflow, and residual chlorine level of 50 ppm.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.2
• /
• pp.65-73
• /
• 2023

Fishways are essential structures that must be installed in rivers to facilitate the movement of fish between upstream and downstream areas. However, the efficiency of fish passage varies depending on the flow conditions within the fishway. Therefore, this study examined the fish-friendly flow characteristics within a stepped fishway at different overflow depths using FLOW-3D, and conducted experiments for model validation. The key parameters affecting fish swimming ability include velocity, turbulent kinetic energy, and energy dissipation rate. These factors were assessed using a simulated fish species, the zacco platypus, to evaluate the suitability of fish-friendly flow condition. It was confirmed that overflow depth significantly influences fish behavior, and an appropriate overflow depth is required for stepped fishway design. The results of this study are expected to serve as fundamental data for the design of stepped fishways in the future.

• Journal of Wetlands Research
• /
• v.12 no.1
• /
• pp.33-40
• /
• 2010

In this study, it has been intended to present the ways to improve some problems such as the difficulty of using the program which had got from the existing study, the computation and application of a lot of parameter and the complicated processing which need to be more simplified. Also It has been tried to bring up the ways to make a flood inundation map and a detailed inundation analysis which could reduce the risk factors. We selected an Anseong-Cheon basin, and wrote a flood inundation scenario based on extreme flood to exceed the planned frequency to consider only overflow and levee break and executed inundation simulation. Researchers conducted an analysis of overflow and levee break using function of HEC-RAS Storage with a One-Dimensional model. It applied Elevation versus Volume Curve for more correct inundation simulation than a method of Area-Time-Depth which used in popular. This study will suggest a mathematical method of SURFER with a little difference of inundation area more simplified and precise flood inundation than complicated Arcview 3.2a which used Query method of Arcview 3.2a.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.174-178
• /
• 2007

The cleaning process to remove small particles, ions, and other polluted sources is one of the major parts in the recent semiconductor industry because it can cause fatal errors on the quality of the final products. According to the other reports, the major factors of bath's fluid motion are the cleaning method, nozzle, the geometry (of bath, guide and wafer), and the position (of guide and wafer). So to enhance cleaning efficiency in the bath, these factors must be controlled. The purpose of this study is to analyze and visualize fluid motion in the cleaning bath as basic data for designing the nozzle system and finding the process control parameters. For that, we used the general CFD code FLUENT.

• Korean Journal of Weed Science
• /
• v.9 no.3
• /
• pp.238-244
• /
• 1989

The experiment was carried out to evaluate the herbicidal properties of dithiopyr(3, 5-pyridine dicarbothioic acid-2-(difluoromethyl)-4-(2-methylpropyl)-6-(trifluoromethyl)-S,S-dimethyl ester). Weeding effect of dithiopyr was determined under various factors such as dosage, soil type, leaching amount, temperature, water depth, overflow time, and application time and method. Dithiopyr showed very high phytotoxic activity on most major annuals weeds, expecially Echinochloa crus-galli and Monochoria vaginalis. Excellent control of Echinochloa crus-galli was obtained at 0.04kg a.i./ha with preemergence application and 0.12kg a.i./ha with early post-emergence application (12 DAT ; Echinochloa crus-galli of 1.5 leaf stage). Weeding effect of dithiopyr decreased when applied at the soil surface 2days before transplanting. Soil type, leaching amount, temperature, water depth, overflow time did not affect the weeding effect.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.4
• /
• pp.59-66
• /
• 2007

The bridge crossing river is the one of the major factors causing backwater level rising. Furthermore, the bridges in the mountainous areas increase the flood damage in the upstream of the bridge due to the blockage by debris. In this research, the effects of debris to the magnitude of flood damage in the study river basin were simulated by using HEC-RAS and HEC-GeoRAS models. With assumption that the backwater caused by debris blocking the space between bridge piers is the only factor causing inundation, the unsteady flow simulation was carried out with various case studies. The potential inundation area with the overflow locations and volumes could be estimated as the results of simulation. However, the simulation results also reveal the limitations of inaccurate estimation of inundation area and depth. To overcome these hindrances, DEM and satellite images were applied to the simulation. By readjusting the inundation area using digital maps and satellite images and calibrating overflow volume and depth using DEM, the accuracy of simulation could be increased resulting more accurate flood damage estimation.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.263-268
• /
• 2005

Recently, restrooms have become a crucial aspect of improving quality of life as a redefined living sector. That offer the functional convenience to user by expansion of toilet space and various subsidiary facilities through reconfiguration of space and automation of equipment naturally, is changing to independent culture space that it is that is comfortable with a rest that comfort and affection overflow using finish introduction and properties of high-quality site. However, existing restrooms in current railway vehicle have not fulfilled such desire and short failed in many aspects of such needs. Even in restrooms for High-Speed Rail System have many areas to improve. Thus, factors encountered by users of rail system have been visually, environmentally and functionally classified.

• Korean Institute of Interior Design Journal
• /
• v.19 no.3
• /
• pp.154-161
• /
• 2010

Domestic distribution environment in Korea has rapidly and qualitatively been developed due to the open of distribution market. However, the function of commercial establishment goes beyond the place value that simple transaction of capacity takes place, and it is recognized as life groove space enhancing the satisfaction of costumers' purchasing pattern. For this reason, there has been the need to change the purchasing environment of commercial space. The change factors of commercial space contributed to the establishment of consumption identity formed by change of consumers' lifestyle and the purchasing pattern. It is necessary to see the change factors of the purchasing pattern as the conversion of distribution environment in terms of supplier and as the change of consumers' lifestyle in terms of consumers. In reality, however, the commercial facility ill-imitated the advanced model and qualitatively was developed. In this situation, the change of the purchasing pattern according to the conversion of facility is needed as an early stage. The purpose of this study is to analyze the overflow supply of commercial facility. Also It will discuss the plan characteristics of commercial space conversion of facility conforming to the change of the purchasing pattern that is predicted in the lifestyle on a conversion stage of facility.