• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.3
• /
• pp.407-420
• /
• 2014

A survey was carried out regarding university students' recognition of high-caffeine energy drinks in an effort to identify and improve problems as well as provide basic data. Most of the subjects had previous experience of energy drink consumption. Studies showed that most students consumed energy drinks when studying. Regarding frequency of energy drink consumption, most students' responded "1~6 times a year"; female students showed lower frequency of energy drink consumption than male students. Both male and female students used convenience stores to purchase energy drinks. In most cases, students became aware of energy drinks through advertisements on TV, radio, newspapers, and magazines. The most important factor affecting their energy drink purchase and consumption status was taste. The most frequent adverse effect they experienced after drinking an energy drink was unusual heart-pounding, whereas the biggest problem caused by energy drink consumption was addiction. This study indicates that students should have a better understanding of the problems associated with excessive and prolonged high-caffeine intake. In addition, instructions for proper purchasing and consumption of high-caffeine energy drinks should be provided as well as education and campaigns concerning symptoms caused by high-caffeine energy drink consumption so that students may refrain from excessive consumption. Further, civil organizations and the government need to devise effective measures for proper regulation of high-caffeine energy drink consumption.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.6
• /
• pp.39-47
• /
• 2014

Daylighting has a great effect on people inside the room. It is also closely related to the lighting energy consumption. Daylight factor(DF) is a very important index for evaluation of the daylighting in overcast sky. The objective of this study is to verify the suitability of the Tregenza's Modified Split Flux formula for the calculation of the daylight factor. We compared the daylight factors calculated by two methods; one by a measurement with 1/5 scale model and the other by the Daysim program. We used variables for verification as window wall ratios(WWR) and angles of the sky visible. As a result, daylight factor calculated by Modified Split Flux is similar to the measurement when more daylight enters the inside. And error is significantly increased when the angle of the sky visible is $50^{\circ}$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.62-71
• /
• 2017

This study classified cities across South Korea according to their urban characteristics, selecting representative cities for respective types, and drawing a relationship among urban characteristic elements, carbon emissions, and the energy consumption of cities. For the classification of cities, the elements of the urban characteristics were examined through a review of the related literature. Factor analysis was then carried out to select the variables from among these elements. The absolute coefficient value found in the analysis was set as a standard. A classification of cities across the country was performed using these variables, and representative cities were chosen for a comparison of the characteristics of each type. For an analysis of the relationships among the urban characteristics according to the type of city, the greenhouse gases, and the energy consumption of cities, emissions of greenhouse gases, electricity consumption, and oil consumption of the representative cities were compared and analyzed by correlation analysis. The analysis results indicated that the cause of greenhouse gas emissions and electricity consumption varies according to the elements of the characteristics of the representative cities, even when they show similar emissions and consumption.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.3
• /
• pp.63-71
• /
• 2003

According to the recent report, the lighting energy consumption of commercial buildings reaches to $30%\sim40%$ of the total energy consumption. It is more than that of cooling & heating energy consumption and it is the major target of energy-saving policy. It is obvious that they are interested in natural lighting device such as Light-shelf for the purpose of raising the lighting energy-saving efficiency. In most of highly developed countries, a thorough study on Light-shelf makes it possible to propose a practical plan while at home there leaves much to be desired to study a guiding principle of optimum plan in spite of its efficiency based on experiments using scale4 model and analysis of simulation. Aiming at making an optimum plan of Light-shelf suitable for the domestic situation, this study is worked by experiments using light-shelf and analysis of variables using illumination program. The experiments is to analyse the efficiency of Light-shelf on condition of the sky and the analysis is to make the simulation using illumination program. This study is composed of 1) the analysis of light with some variables such as presence of light-shelf and degree of angle using 1/2 scaled model 2) making the simulation using Lightscape, illumination program, In brief, concerning presence of light-shelf, it causes little difference in its efficiency in the overcast sky, whereas it decreases an illuminance of window side and provides inner side with the light, which decreases the ratio of the maximum to the minimum inner illuminance and makes the inner of illuminance to range evenly in the clear sky. On degree of angle, as the daylight increases in proportion of degree of angle, the ratio of the maximum to the minimum inner illuminance decreases, which makes it possible to increase the proportion of inner daylight.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.158-159
• /
• 2011

Energy efficiency in wireless sensor networks (WSNs) is one significant factor that needs to be considered when making any designs or doing any enhancements on the communication protocol stack. In WSNs using traditional geographic routing, when a sensor node receives a data packet that needs to be transmitted to the sink, it will forward the packet to the neighbor node which is closest to the sink. The traditional geographic routing assumes that the link quality is always 100%. This may cause a bad result as per which we waste too many energy for retransmissions between the two nodes. Thus, the problem here is how to select such node as forwarder at most efficiently in the aspect of both energy consumption and the distance toward the destination. The better node we choose, the more energy we can conserve for the whole network. In this paper, we propose a next-hop forwarding selection metric, called Energy Consumption for Transmission (ECT), which can resolve the above problem in the best way.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2581-2584
• /
• 2011

Along with response of the Climactic Change Convention, the government is demanding a measuring and reporting system for green-house gas emission and energy consumption on the railroad sector in order to make a transition to a low carbon green railroad system. According to the plans to electric railway line and increase the number of electric rolling stock, the electric consumption is increasing more than the consumption of diesel. Therefore, the development of monitoring device for green-house gases became important issue. In this study we developed a prototype of the monitoring system for estimating electric consumption. This study is expected to make accurate GHG emission inventory and be used to have confidence of emission factor.

• Journal of the Korea Furniture Society
• /
• v.22 no.2
• /
• pp.118-125
• /
• 2011

These days global warming is the most important problem and the most important factor is high emission of carbon dioxide. The 23% of carbon dioxide emission for building construction must be reduced. Thermal conductivity is the most basic factor that can decrease the energy consumption especially insulation. Therefore, an accurate and continuous thermal conductivity measurement can be a way to save energy. In this paper, there are methods about how to investigate thermal conductivity measurements and comparing two methods which are the Heat Flow Meter 436 and TCi.

• Journal of Digital Convergence
• /
• v.21 no.1
• /
• pp.29-34
• /
• 2023

The purpose of this study was to find out the relationship between the frequency of consumption of sports drinks and energy drinks and aerobic physical activity in the 6-29 year old group in the National Health and Nutrition Examination Survey. The sociodemographic characteristics, aerobic physical activity, and beverage intake of the subjects were calculated using composite sample descriptive statistics, and the mean difference between groups was analyzed by cross-tabulation, χ²-test, and binary logistic regression analysis. High-intensity aerobic activity was analyzed as an increase in the intake frequency of sports drinks(ionic drinks, vitamin drinks) and energy drinks(high-caffeine drinks) (p<0.05). Compared to moderate-intensity aerobic physical activity, high-intensity aerobic physical activity was analyzed as a factor influencing the increase in beverage intake frequency. The purpose of this study was to investigate the relationship between physical activity and beverage consumption, which is a critical issue for promoting health both now and in the future, and to developed an intervention program based on the findings. Through this study, we aimed to gather basic data that can help people live healthy lives, and raise both individual and societal awareness of the importance of making better beverage choices.

• Nuclear Engineering and Technology
• /
• v.55 no.2
• /
• pp.587-594
• /
• 2023

This study investigates the impacts of nuclear energy consumption on environmental quality from a different perspective by focusing on carbon dioxide (CO2) emissions, ecological footprint, and load capacity factor. In this context, the South Korea case, which is a leading country producing and consuming nuclear energy, is investigated by considering also economic growth, and the 1997 Asian crisis from 1977 to 2018. To this end, the study employs the autoregressive distributed lag (ARDL) approach. Different from previous literature, this study proposes a load capacity curve (LCC) and tests the LCC and environmental Kuznets curve (EKC) hypotheses simultaneously. The analysis results reveal that (i) the LCC and EKC hypotheses are valid in South Korea; (ii) nuclear energy has an improving effect on the environmental quality; (iii) renewable energy does not have a significant long-term impact on the environment; (iv) the 1997 Asian crisis had an increasing effect on the load capacity factor; (v) South Korea has not yet reached the turning point, identified as $55,411, where per capita income improves environmental quality. Overall, the results show the validity of the LCC and EKC hypotheses and prove the positive contribution of nuclear energy to South Korea's green development strategies.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2283-2286
• /
• 2003

This paper presents conservation of electrical energy in building with harmonics analysis and compensation which occur in electrical system. We use load controlling and management system in order to adjust load factor of system.The maximum demand limiting and controlling are used ,then the system can acquire the prediction and compare it to the maximum demand set point.The electrical signal analysis based on FFT technique. The harmonics are compensated by using harmonic filters.This system consists computer which works as controller, processor , analysis and database unit together with digital power meter in form of multidrop network through serial communication via RS-485.The load control system uses PLC to control load via serial communication RS-485. The A/D converter is used for sampling the electrical signals via parallel port of computer.The harmonic filters are controlled by a computer.The data of measurement such as voltage, current, power, power factor, total harmonic distortion, energy, etc., can be saved as database and analysis. The load factor is adjusted by limiting and controlling maximum demand. The load factor adjustment can reduce the cost of electric consumption and energy generation together with harmonics compensation in order to increase high efficiency of electrical system.