• Quality Improvement in Health Care
• /
• v.7 no.2
• /
• pp.138-155
• /
• 2000

Background: Factors related to waiting and staying time for patient care in emergency care center (ECC) were examined during 1 month from Apr. 1 to Apr. 30, 1997 at an ECC of Yeungnam university hospital in Taegu metropolitan city, to obtain the baseline data on the strategy of effective management of emergency patients. Method: The study subjects consisted of the 1,742 patients who visited at ECC and the data were obtained from the medical records of ECC and direct surveys. Results: The mean interval between ECC admission time and initial care time by each ECC duty residents was 83.1 minutes for male patients and 84.9 minutes for female patients, and mean ECC staying time (time interval between admission and final disposition from ECC) was 718.0 minutes in men and 670.5 minutes in women. As the results, the mean staying time in ECC was higher in older age, and especially the both of initial care time and staying time were highest in patients of medical aid, and shortest in patients of worker's accident compensation insurance. The on admission or not, previously endotracheal-intubation state of patient. The ECC staying ti initial care time was much more delayed in patients of not having previous medical records and the ECC staying time was higher in referred patients from out-patient department, in transferred patients from the other hospitals and patients having previous records, and in patients partly used the order-communicating system. The factors associated with the initial care time were the numbers of ECC patients and the existence of any true emergent patients, being cardiopulmonary resuscitation (CPR) statusme was much more longer in patients of drug intoxication, in CPR patients, in medical department patients, in transfused patients and in patients related to 3 or more departments. And according to the numbers of duty internships, the ECC staying time for four internships was more longer than for five internships and after admission ordering was done, also-more longer in status being of no available beds. As above mentioned results, the factors for the ECC staying time were thought to be statistically significant (P<0.01) according to the patient's age and the laboratory orders and the X-ray films checked. And also the factor for the ECC staying time were thought to be statistically significant (P<0.01) according to the status being of no available beds, the laboratory orders and/or the special laboratory orders, the X-ray films checked, final disposing department, transferred to other hospital or not, home medication or not, admission or not, the grades of beds, the year grades of residents, the causes of ECC visit, the being CPR status on admission or not, the surgical operation or not, being known personells in our hospital. Conclution: Authors concluded that the relieving method of long-staying time in ECC was being establishing the legally proved apparatus which could differentiate the true emergency or non-emergency patients, and that the methods of shortening ECC staying time were doing definitely necessary laboratory orders and managing beds more flexibly to admit for ECC patients and finally this methods were thought to be a method of unloading for ECC personnels and improving the quality of care in emergency patients.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.1
• /
• pp.33-46
• /
• 2010

We investigated and estimated at the characteristics of decomposition and by-products of N-Nitrosodimethylamine (NDMA) using a design of experiment (DOE) based on the Box-Behken design in an UV process, and also the main factors (variables) with UV intensity($X_2$) (range: $1.5{\sim}4.5\;mW/cm^2$), NDMA concentration ($X_2$) (range: 100~300 uM) and pH ($X_2$) (rang: 3~9) which consisted of 3 levels in each factor and 4 responses ($Y_1$ (% of NDMA removal), $Y_2$ (dimethylamine (DMA) reformation (uM)), $Y_3$ (dimethylformamide (DMF) reformation (uM), $Y_4$ ($NO_2$-N reformation (uM)) were set up to estimate the prediction model and the optimization conditions. The results of prediction model and optimization point using the canonical analysis in order to obtain the optimal operation conditions were $Y_1$ [% of NDMA removal] = $117+21X_1-0.3X_2-17.2X_3+{2.43X_1}^2+{0.001X_2}^2+{3.2X_3}^2-0.08X_1X_2-1.6X_1X_3-0.05X_2X_3$ ($R^2$= 96%, Adjusted $R^2$ = 88%) and 99.3% ($X_1:\;4.5\;mW/cm^2$, $X_2:\;190\;uM$, $X_3:\;3.2$), $Y_2$ [DMA conc] = $-101+18.5X_1+0.4X_2+21X_3-{3.3X_1}^2-{0.01X_2}^2-{1.5X_3}^2-0.01X_1X_2+0.07X_1X_3-0.01X_2X_3$ ($R^2$= 99.4%, 수정 $R^2$ = 95.7%) and 35.2 uM ($X_1$: 3 $mW/cm^2$, $X_2$: 220 uM, $X_3$: 6.3), $Y_3$ [DMF conc] = $-6.2+0.2X_1+0.02X_2+2X_3-0.26X_1^2-0.01X_2^2-0.2X_3^2-0.004X_1X_2+0.1X_1X_3-0.02X_2X_3$ ($R^2$= 98%, Adjusted $R^2$ = 94.4%) and 3.7 uM ($X_1:\;4.5\;$mW/cm^2$, $X_2:\;290\;uM$, $X_3:\;6.2$) and $Y_4$ [$NO_2$-N conc] = $-25+12.2X_1+0.15X_2+7.8X_3+{1.1X_1}^2+{0.001X_2}^2-{0.34X_3}^2+0.01X_1X_2+0.08X_1X_3-3.4X_2X_3$ ($R^2$= 98.5%, Adjusted $R^2$ = 95.7%) and 74.5 uM ($X_1:\;4.5\;mW/cm^2$, $X_2:\;220\;uM$, $X_3:\;3.1$). This study has demonstrated that the response surface methodology and the Box-Behnken statistical experiment design can provide statistically reliable results for decomposition and by-products of NDMA by the UV photolysis and also for determination of optimum conditions. Predictions obtained from the response functions were in good agreement with the experimental results indicating the reliability of the methodology used.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.2
• /
• pp.43-49
• /
• 2019

Purpose: This study examined changes in the position of the heat and lungs depending on the patient's breathing method during left breast cancer radiotherapy and used treatment plans to compare the resulting radiation dose. Materials and methods: The participants consisted of 10 patients with left breast cancer. A CT simulator(SIMENS SOMATOM AS, Germany) was used to obtain images when using three different breathing methods: free breathing(FB), deep inspiration breath hold(DIBH with Abches, DIBH), inspiration breath hold(IBH with CPAP, CPAP). A Ray Station(5.0.2.35, Sweden) was used for treatment planning, the treatment method was volumetric modulated arc therapy (VMAT) with one partial arc of the same angle, and the prescribed dose to the planning target volume (PTV) was a total dose of 50Gy(2Gy/day). In treatment plan analysis, the 95% dose (D95) to the PTV, the conformity index(CI), and the homogeneity index (HI) were compared. The lungs, heart, and left anterior descending artery (LAD) were selected as the organs at risk(OARs). Results: The mean volume of the ipsilateral lung for FB, DIBH, and CPAP was 1245.58±301.31㎤, 1790.09±362.43 ㎤, 1775.44±476.71 ㎤. The mean D95 for the PTV was 46.67±1.89Gy, 46.85±1.72Gy, 46.97±23.4Gy, and the mean CI and HI were 0.95±0.02, 0.96±0.02, 0.95±0.02 and 0.91±0.01, 0.90±0.01, 0.92±0.02. The V20 of Whole Lung was 10.74±4.50%, 8.29±3.14%, 9.12±3.29% and The V20 of the ipsilateral lung was 20.45±8.65%, 17.18±7.04%, 18.85±7.85%, the Dmean of the heart was 7.82±1.27Gy, 6.10±1.27Gy, 5.67±1.56Gy, and the Dmax of the LAD was 20.41±7.56Gy, 14.88±3.57Gy, 14.96±2.81Gy. The distance from the thoracic wall to the LAD was measured to be 11.33±4.70mm, 22.40±6.01mm, 20.14±6.23mm. Conclusion: During left breast cancer radiotherapy, the lung volume was 46.24% larger for DIBH than for FB, and 43.11% larger for CPAP than FB. The larger lung volume increases the distance between the thoracic wall and the heart. In this way, the LAD, which is one of the nearby OARs, can be more effectively protected while still satisfying the treatment plan. The lung volume was largest for DIBH, and the distance between the LAD and thoracic wall was also the greatest. However, when performing treatment with DIBH, the intra-fraction error cannot be ignored. Moreover, communication between the patient and the radiotherapist is also an important factor in DIBH treatment. When communication is problematic, or if the patient has difficulty holding their breath, we believe that CPAP could be used as an alternative to DIBH. In order to verify the clinical efficacy of CPAP, it will be necessary to perform long-term follow-up of a greater number of patients.

• Korean Journal of Agricultural Science
• /
• v.4 no.2
• /
• pp.317-343
• /
• 1977

This study was carried out to obtain the informations about evaporation from pot, soil temperature and soil atmosphere composition in pot, and the effect on the growth of nine ornamental species using seven different containers. The investigated containers were clay pot(CP), clay pot painted in green(CP-P), varnished clay pot(CP-V), polyethylene film inserting in clay pot(CP-PI), clay pot mulched with black polyethylene film(CP-PM), porcelain pot(POP), and plastic pot(PLP). Nine ornamental species were balsam(Impatiens balsamina), chrysanthemum(Chrysanthemum morifolium), cosmos(Cosmos bipinatus), English ivy(Hedera helix), geranium(Pelargonium zonale), kochia(Kochia scoparia var. trichophila), marigold(Tagetes patula), ornamental kale(Brassica oleraceae var. acephala), and salvia (Salvia splendens). The results obtained are summarized as follows: 1. Dry weight of all tested species grown in PLP, POP, CP-P, CP-V and CP-PI was heavier than that of CP. 2. Plant height in nine tested species grown in PLP, POP, CP-P, CP-V, and CP-PI was taller than that of CP. 3. Geranium grown in PLP, POP, CP-P, and CP-V gave more number of leaf than that of CP. 4. The number of flower in balsam grown in PLP, POP, CP-P, CP-V and CP-PI was more than that of CP. The result from marigold was very similar to this tendency. Spike length and floret number in salvia gave the same tendency, but its spike number was not different among containers used. 5. The average diurnal evaporation from PLP and POP was about 43% of that of CP. About two third of total evaporation from CP was through pot wall. 6. The evaporation rate from the slowest to the highest was PLP, POP, CP-P, CP-V, CP-PI, CP-PM and CP. Containers inhibiting evaporation through pot wall hold more soil moisture than CP from one day after water supply. 7. The more evaporative water-loss from containers gave the lower soil temperature. The variation of soil temperature among containers was higher during the day than the night. 8. The $O_2$ concentration of soil atmosphere in CP was higher than that of nonporous containers, and the difference between them was 0.40-1.12%. The range of the $O_2$ concentration 17.95~19.62%. The $CO_2$ concentration of soil atmosphere in CP was lower than that of nonporous containers, and its range was 0.59-1.76%. This deviation in soil atmosphere composition did not influenced on the growth of plants. 9. There was a possitive correlation between the amount of soil water and the plant growth. 10. Plant grown on CP gave more total nitrogen content in top growth than that on PLP. C/N ratio was somewhat low in plant on CP. From the above results, $O_2$ and $CO_2$ concentration in soil atmosphere did not gave enough deviation to the extent which affect the plant growth. The effect of soil moisture on the plant growth using different containers was the far-most significant factor from this investigation. Therefore, it was obious that the utilization of the nonporous container might save the cost for water supply and reduce the production cost of the pot-grown ornamental plant in Korea eventually.

• Journal of the Korean Geographical Society
• /
• v.29 no.1
• /
• pp.84-104
• /
• 1994

The migration of population into the city has been on the increase according as Korea has been industrialized repidly since the 1960's. And there is a steady decrease in rural population. Thus lack of the number of the students forced many elementary Schools to be abolished. The aim of this study is to grasp the abolition types and the regional characteristics with the subject region of Chungbuk province. From the viewpoint of the increasing abolition of the elementary schools, I think it is very important to understand how the elementary schools have been abolished so far and predict how the subject region will have been changed in geography. Data for this study are based on Annual Establishment-Abolition Situation of the Schools published by Chungbuk office of Education in 1992, and many Kinds of the statistical reports, and the interview with the related. The results are as follows: 1. By examining the change of the number of the elementary schools and students in Chnugbuk, the numder of the students had also decreased since 1969 and was less than the half in 1990. As the number of the schools began to decrease ten years later than the students began to, the abolition of the elementary schools has started in reality from 1980's. 2. The 72 elementary schools were aboilshed between 1980 and 1992: the principal school is 9.7%, the branch school is 90.3%. The most fifteen schools are abolished in Yongdong-county and Chechon-county, and the least one school is abolished in Chechon-city and Okchon-county, and there is no abolition in Chongju-city and Chungju-city: According to the type of the abolition process, the least seven principal schools are abolished, and the principal school is reorganized as a branch school and twenty eight branch schools are abolished, and the most thirty seven branch schools are abolished. 3. When special change of the abolition is classified into the first perio (1980-1986) and the second period (1987-1992), in the first period the principal and branch schools were abolished and they are 13.9% of total abolition. The abolition out of them by building a dam is 60%. The principal schools in the submerged area though they have many students, were abolished. In the second period sixty two branch schools are abolished and they are 86.1% of total abolition. The most fifteen schools are abolished in Yongdong-county, thirteen in Chechon-county, seven in Tanyang-county, six in Chongwon-county, five in Chungwon-county and Koesan-county. Unlike the first period, the schools were abolished in this period because the number of students was so small. In this period sixty branch schools were abolished. All the students in the abolished schools except six schools transfered to the principal schools. The 58 school authorities help the students attend school by bus or support the expenses for attending school after that. 4. The abolition types of city, county and myon are classified into five types by the number of the abolished schools. The most forty nine abolished schools in type II are 68.1 of the total abolition. The least three abolished ones in type I are 12.5%. Considering the relation between the abolition type ane the number of schools and students, the number of the schools, increased in type I, II, III, V except IV from 1980 and then have decreased by abolition since 1980, while the more students decreased than they did in 1970 and the more the abolished school increases, the less the students decreases. The average students per school decreased in every abolition type and the most students decreased in type IV. 5. Considering the relation between the abolition type and the regional characteristics, most abolished schools were located between 100m and 300m above the sea level and it is 71% of the total abolition. The region without the abolition is high in the ratio of the cultivate land, ratio of rice field, and the part-time farmer, but the region with many abolition is low in the ratio of cultivated land. As for the manufacturing there are the most city, county and myon in the abolition type in Youngdong-county and Chechon-county where the manufacturing ratio of employing is low but Chongju-city without the abolition is a region where the manufacturing ratio is high. Consequently the development of the manufacturing causes the population to emigation out and the decrease of the population leads the transport is difficult of access, the facilities sold after being abolished are not being used in many ways. 7. Take an example of Youndong-county where the most schools were abolished, I have examined the school district and the population characteristics of the abolition. Though there were more villages, households, populations in the region that is higher than low above the sea level, the schools were abolished. Therefore we know that above the sea level had a great effect on the abolition. As a result of the regional analysis of the abolition, many schools were abolished by the artificial buildings such as a dam in the early 1980's but the schools in the late 1980's were abolished ten years later after the students decreased. More schools were abolished in the region where the manufacturing industry didn't develop. And the higher the school position was above the sea level, the sooner the school was abolished. It is also proved that both the beautiful natural scenery and accessibility are the important factor in using the abolished facilities practically.

• Korean Journal of Poultry Science
• /
• v.39 no.4
• /
• pp.305-310
• /
• 2012

This work was carried out to investigate performance and carcass yield of large-type broilers at different stocking densities. Treatments were T1 (9.1 birds/$m^2$), T2 (10.3 birds/$m^2$) and T3 (11.5 birds/$m^2$) by the stocking density. Four hundred eight 1-day-old Arbor Acre broiler chicks were used for six weeks (starter, 0~1 wks; earlier, 1~3 wks; finisher, 3~6 wks) and divided into 3 treatments (4 replications/treatment, 30, 34 or 38 birds/replication). Research indexes were rearing viability ratio, body weight, body weight gain, feed intake, feed conversion ratio, production efficiency factor and carcass ratio. Rearing viability ratio (%) was 89% or more for all treatments and there was no significant difference on weekly rearing viability ratio (%). Body weight of T2 was the greatest and that of T3 was the lowest at 1 weeks old (P<0.05). Body weight gain of T2 was the greatest and that of T3 was the lowest at 0~1 weeks old (P<0.05). However, body weight gain of T3 was the greatest and that of T1 was the lowest at 1~2 weeks old (P<0.05). Body weight gain of T2 was the greatest as 3,031 g among treatments at 0~6 weeks old (P<0.05). Feed intakes of T1, T2 and T3 were 1,417 g, 1,265 g and 1,355 g, respectively, and that of T1 was the greatest among treatments (P<0.05). There was no significant difference on body weight, body weight gain and feed intake. Feed conversion ratio of T1 was the greatest among treatments at 1~2 wks, 3~4 wks and 0~6 wks old (P<0.05). Production efficiency factors of T1, T2 and T3 were 363.5, 388.3 and 358.3, respectively, and there was no significant difference among treatments. Wing meat ratio of T1 was the higher compared to other treatments at the age of 4 wk (P<0.05). There was no significant difference on carcass ratio and partial meat ratio among treatments. Neck meat ratio of T2 was the lowest among treatments (P<0.05). This result may provide the standard data of different stocking densities for large-type broiler and the further research is needed.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.67-72
• /
• 2009

Purpose: ISCD (International Society for Clinical Densitometry) requests that users perform mandatory Precision test to raise their quality even though there is no recommendation about patient selection for the test. Thus, we investigated the effect on precision test by measuring reproducibility of 3 bone density groups (normal, osteopenia, osteoporosis). Materials and Methods: 4 users performed precision test with 420 patients (age: $57.8{\pm}9.02$) for BMD in Asan Medical Center (JAN-2008 ~ JUN-2008). In first group (A), 4 users selected 30 patient respectively regardless of bone density condition and measured 2 part (L-spine, femur) in twice. In second group (B), 4 users measured bone density of 10 patients respectively in the same manner of first group (A) users but dividing patient into 3 stages (normal, osteopenia, osteoporosis). In third group (C), 2 users measured 30 patients respectively in the same manner of first group (A) users considering bone density condition. We used GE Lunar Prodigy Advance (Encore. V11.4) and analyzed the result by comparing %CV to LSC using precision tool from ISCD. Check back was done using SPSS. Results: In group A, the %CV calculated by 4 users (a, b, c, d) were 1.16, 1.01, 1.19, 0.65 g/$cm^2$ in L-spine and 0.69, 0.58, 0.97, 0.47 g/$cm^2$ in femur. In group B, the %CV calculated by 4 users (a, b, c, d) were 1.01, 1.19, 0.83, 1.37 g/$cm^2$ in L-spine and 1.03, 0.54, 0.69, 0.58 g/$cm^2$ in femur. When comparing results (group A, B), we found no considerable differences. In group C, the user_1's %CV of normal, osteopenia and osteoporosis were 1.26, 0.94, 0.94 g/$cm^2$ in L-spine and 0.94, 0.79, 1.01 g/$cm^2$ in femur. And the user_2's %CV were 0.97, 0.83, 0.72 g/$cm^2$ L-spine and 0.65, 0.65, 1.05 g/$cm^2$ in femur. When analyzing the result, we figured out that the difference of reproducibility was almost not found but the differences of two users' several result values have effect on total reproducibility. Conclusions: Precision test is a important factor of bone density follow up. When Machine and user's reproducibility is getting better, it’s useful in clinics because of low range of deviation. Users have to check machine's reproducibility before the test and keep the same mind doing BMD test for patient. In precision test, the difference of measured value is usually found for ROI change caused by patient position. In case of osteoporosis patient, there is difficult to make initial ROI accurately more than normal and osteopenia patient due to lack of bone recognition even though ROI is made automatically by computer software. However, initial ROI is very important and users have to make coherent ROI because we use ROI Copy function in a follow up. In this study, we performed precision test considering bone density condition and found LSC value was stayed within 3%. There was no considerable difference. Thus, patient selection could be done regardless of bone density condition.

• Journal of Nutrition and Health
• /
• v.49 no.3
• /
• pp.165-178
• /
• 2016

Purpose: This study was performed to examine associations of intakes of milk and dairy products, pulses, and soy foods with bone health in Koreans aged 50 yr and older. Methods: A total of 3,201 men and 3,581 women aged 50 yr and older who participated in the 2008~2011 Korea National Health and Nutrition Examination Survey were grouped by sex and age groups of 50~64 yr and 65 yr and older. Subjects within each sex and age group were divided into three bone health groups: normal, osteopenia, and osteoporosis groups based on bone mineral density. Intakes of nutrients and foods derived from 24-hour recall data were compared among three bone health groups. Associations between intake frequencies of foods, including milk, yogurt, tofu, or soy milk, and osteoporosis risk were evaluated based on confounding risk factor-adjusted logistic regression. Results: Calcium intake was in the order of normal, osteopenia, and osteoporosis in men (p < 0.01) and women (p < 0.05) aged 50~64 yr as well as in men aged 65 yr and older (p < 0.001). In women aged 50~64 yr, intake of milk and dairy products was lower in the osteoporosis group (p < 0.01) as compared with the osteopenia group. Intake of pulses or tofu was not significantly different among bone health groups. Odds ratio (OR) for milk intake frequency (${\geq}2$ times/week) compared to intake frequency less than 1 time/month was 0.45 (95% CI 0.24~0.85, p for trend = 0.022) in men aged 65 yr and older. The OR for yogurt intake frequency (1 time/month~1 time/week) was 0.47 (95% CI 0.30~0.73, p for trend = 0.019) in women aged 50~64 yr. Intake frequency of tofu or soy milk was not associated with reduced risk of osteoporosis in all groups. Conclusion: Dairy food intake was significantly associated with bone health, and its effect was sex- and age group-specific, whereas soy food intake was not. Dietary intervention to prevent osteoporosis would be effective for women aged 50~64 yr old and for men aged 65 yr and older.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.10
• /
• pp.1439-1449
• /
• 2015

Prunus persica Flos (PPF) were investigated for their antioxidant and anti-inflammatory activities to find a natural functional food resource preventing degenerative diseases associated with excessive oxidative stress and chronic inflammation. PPF was extracted using ethanol (EtOH) and then sequentially fractioned by hexane (Hx), dichloromethane (DM), ethyl acetate (EA), n-butanol (BtOH), and water (DW). Contents of total phenolics and flavonoids, as well as 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical scavenging activities were measured. Anti-inflammatory effects in terms of nitric oxide (NO), prostaglandin (PG) E2, and pro-inflammatory cytokines such as interleukin (IL)-6 and tumor necrosis factor (TNF)-${\alpha}$ production were also measured using LPS-treated RAW 264.7 macrophages. EtOH extract showed relatively high antioxidant activity with high total phenolic (78.1 mg tannic acid/g) and flavonoid contents (55.3 mg rutin/g). EA fraction contained the highest total phenolic and flavonoid contents (394.6 mg tannic acid/g, 253.7 mg rutin/g), followed by BtOH (128.3 mg tannic acid/g, 93.1 mg rutin/g). EA and BtOH fractions and EtOH extract showed higher DPPH radical and ABTS radical scavenging activities than the others (P<0.05). In LPS-treated RAW 264.7 macrophages, EtOH extract ($200{\mu}g/mL$) showed significantly reduced (P<0.05) NO, PGE2, and TNF-${\alpha}$ production levels to 38.5%, 32.3%, and 48.9% of the control, respectively, as well as reduced iNOS and COX-2 protein expression. DM fraction ($50{\mu}g/mL$) showed significantly reduced (P<0.05) NO, PGE2, IL-6, and TNF-${\alpha}$ production levels to 43.5%, 13.3%, 38.7%, and 41.3% of the control, respectively, and EA fraction ($50{\mu}g/mL$) showed significantly reduced NO, PGE2, IL-6, and TNF-${\alpha}$ production levels to 44.8%, 22.4%, 45.7%, and 62.0% of the control, respectively. Taken together, EtOH extract of PPF showed potent antioxidant and anti-inflammatory activities, and EA and BtOH fractions showed comparatively stronger antioxidant activities while DM and EA fractions showed stronger anti-inflammatory activities. It can be concluded that EtOH extract of PPF and its fractions are good candidates as natural resources for the development of anti-oxidative and anti-inflammatory functional food products.

• Radiation Oncology Journal
• /
• v.19 no.1
• /
• pp.66-73
• /
• 2001

Purpose : For the research of Boron Neutron Capture Therapy (BNCT), fast neutrons generated from the MC-50 cyclotron with maximum energy of 34.4 MeV in Korea Cancer Center Hospital were moderated by 70 cm paraffin and then the dose characteristics were investigated. Using these results, we hope to establish the protocol about dose measurement of epi-thermal neutron, to make a basis of dose characteristic of epi-thermal neutron emitted from nuclear reactor, and to find feasibility about accelerator-based BNCT. Method and Materials : For measuring the absorbed dose and dose distribution of fast neutron beams, we used Unidos 10005 (PTW, Germany) electrometer and IC-17 (Far West, USA), IC-18, ElC-1 ion chambers manufactured by A-150 plastic and used IC-l7M ion chamber manufactured by magnesium for gamma dose. There chambers were flushed with tissue equivalent gas and argon gas and then the flow rate was S co per minute. Using Monte Carlo N-Particle (MCNP) code, transport program in mixed field with neutron, photon, electron, two dimensional dose and energy fluence distribution was calculated and there results were compared with measured results. Results : The absorbed dose of fast neutron beams was $6.47\times10^{-3}$ cGy per 1 MU at the 4 cm depth of the water phantom, which is assumed to be effective depth for BNCT. The magnitude of gamma contamination intermingled with fast neutron beams was $65.2{\pm}0.9\%$ at the same depth. In the dose distribution according to the depth of water, the neutron dose decreased linearly and the gamma dose decreased exponentially as the depth was deepened. The factor expressed energy level, $D_{20}/D_{10}$, of the total dose was 0.718. Conclusion : Through the direct measurement using the two ion chambers, which is made different wall materials, and computer calculation of isodose distribution using MCNP simulation method, we have found the dose characteristics of low fluence fast neutron beams. If the power supply and the target material, which generate high voltage and current, will be developed and gamma contamination was reduced by lead or bismuth, we think, it may be possible to accelerator-based BNCT.