• 제목/요약/키워드: Facility interface

검색결과 168건 처리시간 0.026초

DISSIMILAR FRICTION-STIR WELDING OF ALALLOY 1050 AND MGALLOY AZ31

  • Park, Seung Hwan C.;Masato Michiuchi;Yutaka S. Sato;Hiroyuki Kokawa
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
    • /
    • pp.534-538
    • /
    • 2002
  • Dissimilar friction stir welding of aluminum (AI) alloy 1050 and magnesium (Mg) alloy AZ31 was successfully done in the limited welding parameters. The dissimilar weld showed good quality and facility compared to conventional fusion weld. Transverse cross section perpendicular to the welding direction had no defects. The weld was divided into base material of Al alloy, an irregular shaped stir zone and base material of Mg alloy. The irregular shaped stir zone was roughly located around the initial weld center. The weld interface near plate surface shifted from initial weld centerline to the advancing side. Hardness profile of the weld was heterogeneous, and the hardness value of the stir zone was raised to about 150 Hv to 250 Hv. The mixed phase was identified to intermetallic compound $Mg_{17}$Al$_{12}$ using x-ray diffraction method, energy dispersive x-ray spectroscopy (EDX) and electron probe micro analysis (EPMA). The formation of intermetallic compound $Mg_{17}$Al$_{12}$ during FSW causes the remarkable increase in hardness value in the stir zone.one.

  • PDF

지역개발 활성화를 위한 지리정보 DB 연구 (Geographic Information Database for Facilitating Regional Development)

  • 김항집;최봉문
    • 한국지리정보학회지
    • /
    • 제5권2호
    • /
    • pp.69-80
    • /
    • 2002
  • 본 연구는 GIS와 지리정보 DB가 지역계획이나 도시계획을 위한 단순한 기능적 도구가 아니라, 지역발전을 촉진하는 지역정보기반으로서 구축되어야 함을 전제로 하였다. 이를 위하여 국내외의 지리정보 DB 구축사례를 분석하고, 정보사회에서 GIS가 수행해야 할 역할을 분석하였다. 이를 바탕으로 지역개발과 연계되는 지리정보 DB가 구축되기 위해서는 지리정보의 내용적 기술적 제도적 변화가 이루어져야 함을 서술하였다. 즉, 향후의 지역 지리정보는 내용적으로는 다양화, 충실화, 기능화되고, 기술적으로는 메타자료의 구축, 사용자 중심의 인터페이스, DB구조의 유연성을 갖추어야 하며, 제도적으로는 유통체계 확립 민관 정보공유, 지리정보 공개 등이 보장되어야 한다.

  • PDF

Development of a Computer Code for Low-and Intermediate-Level Radioactive Waste Disposal Safety Assessment

  • Park, J.W.;Kim, C.L.;Lee, E.Y.;Lee, Y.M.;Kang, C.H.;Zhou, W.;Kozak, M.W.
    • Journal of Radiation Protection and Research
    • /
    • 제29권1호
    • /
    • pp.41-48
    • /
    • 2004
  • A safety assessment code, called SAGE (Safety Assessment Groundwater Evaluation), has been developed to describe post-closure radionuclide releases and potential radiological doses for low- and intermediate-level radioactive waste (LILW) disposal in an engineered vault facility in Korea. The conceptual model implemented in the code is focused on the release of radionuclide from a gradually degrading engineered barrier system to an underlying unsaturated zone, thence to a saturated groundwater zone. The radionuclide transport equations are solved by spatially discretizing the disposal system into a series of compartments. Mass transfer between compartments is by diffusion/dispersion and advection. In all compartments, radionuclides ate decayed either as a single-member chain or as multi-member chains. The biosphere is represented as a set of steady-state, radionuclide-specific pathway dose conversion factors that are multiplied by the appropriate release rate from the far field for each pathway. The code has the capability to treat input parameters either deterministically or probabilistically. Parameter input is achieved through a user-friendly Graphical User Interface. An application is presented, which is compared against safety assessment results from the other computer codes, to benchmark the reliability of system-level conceptual modeling of the code.

수력발전소 정비변수 및 회전체 통합관리 시스템 개발 (Development of an Integrated Management System for Maintenance Parameters and Rotary Machine of Hydro-power Plant)

  • 신성환;박진호;윤두병
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2012년도 춘계학술대회 논문집
    • /
    • pp.263-269
    • /
    • 2012
  • Condition-based maintenance (CBM) has been used as a useful concept for optimizing maintenance plan and decreasing maintenance cost in several kinds of plant sites. This study introduced an example that developed an integrated management system for maintenance parameters and hydraulic turbine of hydro-power plant in order to improve its maintenance system as applying CBM techinique. The integrated management system consists of three parts. One is a hardware part including PDA inspection system and several kind of precision measuring instruments. Another is a vibration monitoring system on hydraulic turbine. The other is a software part that takes charge of making hierarchy tree of maintenance parameters and their inspection route, managing accumulated database, assessing health condition of components, and supporting interface with other enterprise management system. The system has been installed at Chuncheon Hydro-power plant for test and demonstration. It is expected that the system can contribute database construction for diagnostics and prognostics on facility health condition and systematic accumulation of know-how on operation and maintenance of plant.

  • PDF

노면전철형식의 경량전철 운전규정에 관한 연구 (The Study of Operation provision for lightrail of tram formats)

  • 이수환;김유호;이훈구;편선호;황현철
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 제39회 하계학술대회
    • /
    • pp.1023-1024
    • /
    • 2008
  • The road surface scripture season must be interpreted with hitherto whole aspect line scripture season different. TRAM (street cars) it respects an operation it stands and back must be operated the bus which runs place and riding grade different public transportation means and to be mixed. With the numerous crossroads zebra crossing and the coat platform must operate back. The role of the operation article most is important. It undergoes the influence of traffic signal specially directly. It considers each facility etc. of the road and must construct a proper equipment in him with connection method of the signal system which it follows in the middle urethra. Must secure the fixed time characteristic of the operation which road surface scripture season is efficient and expression speed and operation. In order the [le] according to interface plan with traffic signal it does to consider a traffic signal first of all. This the research of operation provision is necessary.

  • PDF

실시간 플랜트 시뮬레이터를 이용한 우주 열환경 챔버 제어기 개발에 관한 연구 (Study on the application of a realtime simulator to the development of a controller for a space thermal environment chamber)

  • 정무진;신영기;최석원;문귀원;서희준;이상훈;조혁진
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 추계학술대회
    • /
    • pp.216-221
    • /
    • 2003
  • A thermal vacuum chamber is mainly used to simulate thermal environments of a test satellite in satellite orbits in which daily temperature variations range from 80K to above 400K depending on solar radiation under the vacuum below $10^{-4}$ torr. The test facility is quite complex and consists of expensive parts. So any modification of control software is discouraged in fear of unexpected system failure. The purpose of this study is to develop a realtime dynamics model of the thermal vacuum chamber in view of controller design and simulate its electrical inputs and outputs for interface with a PLC (programmable logic controller). A PLC program that was used in the thermal vacuum chamber is applied to the realtime simulator. The realized simulator dynamics is found to be quite similar to that of the thermal vacuum chamber and serve to an appropriate plant to verify the control performance of a programmed PLC.

  • PDF

고속 데이터 전송을 위한 광모뎀 개발에 관한 연구 (A Study on the optical MODEM Development for high Speed Data Transmission)

  • 은재정;권원현;김석희;박한규
    • 한국통신학회논문지
    • /
    • 제12권6호
    • /
    • pp.612-620
    • /
    • 1987
  • 기존 RF변조복조기의 한계를 극복하고, 고속 장거리 전송이 가능한 광변복조기를 설계 제작하였다. 인터페이스는 기존시스템과의 호환성을 위해 EIA RS-232C와 CCITT V.24를 채택하였고 디지털 코딩 방식으로는 Biphase코딩방식을 사용하였다. 또한 시스템의 자체 진단을 위한 Loopback Test기능을 부가하였다. 광 송수신기의 단파장대의 LD-APD를 사용하여 $10^-9$BER에서 -30dBm의 수신 감도를 갖도록 설계하였다. 구성된 시스템은 동기식의 경우 1200bps~57.6Kbps, 비동기식의 경우 DC~200Kbps 까지 임의의 속도로 데이타 전송이 가능하였다.

  • PDF

Concept Establishment of Territoriality of External Public Space of Housing Complex - Focusing on review of previous research -

  • Kim, Jin-Soo;Kim, Jin-Mo
    • KIEAE Journal
    • /
    • 제15권5호
    • /
    • pp.59-66
    • /
    • 2015
  • Purpose: Recently, Housing area plan has tried to reflect a public space of various forms. However, most of cases are indiscriminately developments, which don't reflect the diverse needs of residents. In addition, a subject of the public space is not clear and consistently stable of the management, so the residents don't have an interest enough to take advantage of it. Method: In order to make a plan of the public space of a residential complex, an architect designer needs to take a few things into consideration. One is a physical facility in needs. And other one is a management of keeping a social place stably and consistently, which allows residents to be able to interact with each other. It should be regarded for residents to form a sense of belonging, while minimizing the interface friction. When all these problems are fulfilled, an interaction will be made to improve the quality of the living environment. Result: Therefore, in this study, it is necessary to define the meaning of territoriality of the external public space of housing complex. This study makes it possible to improve the relationship of neighborhood and the quality of the life for the residents, depending on the time. This is the first step as 'the research for the territoriality of the external public space of housing complex', in order to define about the concept, function, characteristic of territory(the base of territoriality) and to establish the territoriality that can form the physical or psychological boundary in public space.

장기 용수 공급계획 수립을 위한 스프레드 쉬트 모형 (A Spread Sheet Model for a Long Range Water Supply Planning)

  • 김승권
    • 대한토목학회논문집
    • /
    • 제12권3호
    • /
    • pp.153-162
    • /
    • 1992
  • 시스템 분석에 의한 합리적인 장기(長期) 용수공급(用水供給) 계획(計劃)의 수립을 위하여 동적(動的) 입지선정문제(立地選定問題)의 유형으로 수학적 모형을 정립하였고, 복잡한 혼합 정수계획 문제를 푸는 대신에 스프레드 쉬트를 이용한 간단한 계산모형으로 실제적인 해를 구할 수 있음을 보였다. 분석의 결과로서는 용수 공급시설 및 용수로의 최적의 건설 시기와 기간별 최적 용수공급 운영 양상이 정해진다. 시스템 분석을 통한 합리적(合理的)인 용수공급 계획의 수립이 주먹 구구식의 계획수립에 비하여 약 15% 정도의 예산 절감(節減) 효과(效果)가 있을 수도 있음을 사례분석을 통하여 간접적으로 보여준다.

  • PDF

APR 1400급 원자로냉각재펌프의 회전체 진동평가에 관한 고찰 (Introduction of Vibration Evaluation for APR 1400 Reactor Coolant Pump Shaft)

  • 김익중;임도현;김민철;방상윤
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2014년도 추계학술대회 논문집
    • /
    • pp.110-115
    • /
    • 2014
  • The nuclear power plant was launched by Kori unit 1 in 1978 years. Currently, 23 nuclear power plants have been operating in Korea since 1978 years. The localization was completed for most of the reactor facility from Hanbit(Youngkwang) unit 3&4. However, RCP(Reactor Coolant Pump) and MMIS(Man Machine Interface System) is an important technology that has been excluded from the scope of the technical transfer has been dependent on a specific overseas vendor. Recent success in RCP development through co-operation with government and industries. Developed RCP will be applied to Shin-Hanul unit 1&2 nuclear power plants. The RCP operates in high speed and high pressure condition and only rotating component in the NSSS(Nuclear Steam Supply System). Therefore, the problem of vibration has arisen caused by the hydraulic forces of the working fluid. These forces can influence on the stability characteristics for entire RCS(Reactor Coolant System) loop, and can act as significant destabilizing forces. In this study, vibration evaluation of the pump shaft of development RCP estimated under normal operation and over speed conditions. In order to predict the vibration characteristics and dynamic behavior, modal analysis, critical speed analysis and unbalance response spectrum analysis were performed.

  • PDF