• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.2
• /
• pp.121-129
• /
• 2002

The present paper describes a technique for installing an effective grounding grids, the major objective is forced on the experimental evaluation of the performance and characteristics with the arrangement and installation method for grounding grids consisting of the means to protect electric shock, electronics and computerized facilities against lightning, switching and ground fault surges. The study is oriented on two major areas: (1) the analysis of the ground surface potential gradient with the arrangement of grounding grids, (2) the control of the dangerous ground surface potential rise. The experiments wee carried out with the impulse currents as a function of the installation method or arrangement of grounding grids. An installation method of the inclined auxiliary grounding grid was proposed to overcome the drawbacks of equally spared grounding grids, i.e. an appropriate design concept far the installation of grounding grids was found out, It has been shown that the installation of the intwined auxiliary grounding grid can also result in a mere than 50% decrease in the maximum potential gradient on the ground surface and enhance the level of safety for persons and electronic equipments..

• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.67-72
• /
• 2010

This study was done to provide basic data on the safety of professionals in medical imaging system by measuring the electromagnetic waves generated in the medical imaging system being used in medical organization. The studied medical imaging systems were general X-ray system, computed tomography(CT), ultrasonographic(USG) system, magnetic resonance imaging(MRI), PET-CT and fluoroscopic(R/F) system, and through these devices, electric field and magnetic field were measured and analyzed. As a result of the analysis, the measured values classified by the medical organizations were not much significant, but in the measurement by the medical imaging systems, there were high hazard elements in the sequential order of electric field PET-CT($17.7{\pm}22.9$)v/m, CT($10.3{\pm}8.7$)v/m, general X-ray system($8.8{\pm}8.8$)v/m, magnetic field general X-ray system($5.06{\pm}8.26$)mG, CT($2.71{\pm}4.53$)mG and PET-CT($0.74{\pm}0.34$)mG, the systems that adopted X-ray as main ray source, and the more aged the medical imaging systems, the greater the effects of electro-magnetic waves($10.6{\pm}15.93v/m$ for 5 years or more, $6.14{\pm}5.60v/m$ for 5 years or less). The effects of electromagnetic waves on medical imaging systems or facilities were not much when the notification of ministry of knowledge economy is considered, but in the overall perspective considering all the equipments and facility of the medical organization, such effects were significant. It is determined that sustainable safety managements of electric field and magnetic field must be done during process from medical imaging system installation to maintenance to rule out such factors.

• 전자공학회논문지 IE
• /
• v.48 no.3
• /
• pp.33-39
• /
• 2011

Field training system is an establishment for improving practical ability of college students. That system is a learning experience that are relative to university's regular educational curriculum and industry field training. In order to practice an effective field training system, lots of helps from company, college, students and government's interest are needed. But, in most industry fields, it is hard to accept field training manpower in condition of that has no extra guaranteed budget or staff for field training. Because of it, the biggest matter of college the industry field training is to maintain industry fields. Although students want to be paid properly in industry fields where are furnished the advance facilities and equipments and participated in practices, it is extremely hard situation to achieve it in reality. In this way, the management of industry field training has realistic difficult problems, but it is a necessary system. Therefore, in this paper, methodology and model for industry field training management process are suggested in order to administer effective industry field training. If the industry field training are managed by those system mentioned above, students will have chance to exert their creativeness and speediness through field experience, and industry fields where students can get various dimensions of education are expected to manage.

• Journal of the Society of Disaster Information
• /
• v.9 no.2
• /
• pp.153-163
• /
• 2013

The damage caused by natural and human disasters has been increasing year by year. While the damage from these disasters are unavoidable, reduction of damage level by proper establishment of control measures could be sufficiently achievable. Disaster prevention resources include resources introduced in the event of disaster, such as human, materials, equipments and facilities. Rapid yet proper inputs of these resources are the key factor to minimize any damages from the disaster. Currently, however, the standard and/or criteria for mobilization of the disaster prevention resources have not yet systematically established. Therefore, proper resource management as well as efficient resource input has not been in place. This research is an early stage construction of efficient mobilization resources, which had been irregularly loaded and applied before. Also this study has tried to provide a classification rule for efficient disaster prevention resource management and mobilization, and indeed, provide a foundation for efficient resource management system.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1204-1212
• /
• 2008

This study enables to troubleshoot the problems of the existing dual system with the help of the implementation of totally dualized fault-tolerant system to L-CTC computer and HADAX, and equipments are simplified and systems are modernized with the addition of the control function, as a upgraded LCP control system, to L-CTC computer on the basis of WINDOWS based O/S switched from DOS environment. An error on Microlok, which is aninterlocking apparatus, forwarded to L-CTC computer ensures to handle the false data during the operation of the system. This paper discusses a sure way to prevent the deterioration of (SMRT) L-CYC system and to bolster its stability with formation of the dual system. Additionally, WINDOW based O/S consisting of L-CTC computer leads to simplification and modernization of facilities and enhances maintenance functions offering centralization for branch offices and machine rooms as well.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.4
• /
• pp.269-277
• /
• 2019

In this paper, the compatibility analysis on the track record operation center for the regional industry upbringing is presented. The renewable energy sources such as solar, wind and battery energy storage system have been widely spread in these days. Also the requirements on the efficiency, reliability and power demands of these distributed systems are increasing and they can be demands on the construction of the data track record center for renewable energy industries in order to promote the local industries. The analysis on the size of the de-centralized power system are performed based on the technical issues. The necessities, requirements and center goals to meet these missions are presented in the following session. The proposal of the 1 MW operation center construction and operations are presented in the result of the compatibility analysis. And the lists of the required equipments in the operation facilities are suggested to have proper operational capabilities. The results of this research can be applied in the fundamental data to promote the regional renewable industries.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.4
• /
• pp.57-70
• /
• 2021

This study aims to investigate the security demand about the traffic policing by analyzing civil complaints. Latent Dirichlet Allocation(LDA) was applied to extract key topics for 2,062 civil complaints data related to traffic policing from e-People. And additional analysis was made of reports of violations, which accounted for a high proportion. In this process, the consistency and convergence of keywords and representative documents were considered together. As a result of the analysis, complaints related to traffic police could be classified into 41 topics, including traffic safety facilities, passing through intersections(signals), provisional impoundment of vehicle plate, and personal mobility. It is necessary to strengthen crackdowns on violations at intersections and violations of motorcycles and take preemptive measures for the installation and operation of unmanned traffic control equipments, crosswalks, and traffic lights. In addition, it is necessary to publicize the recently amended laws a implemented policies, e-fine, procedure after crackdown.

• Journal of The Korean Association For Science Education
• /
• v.8 no.1
• /
• pp.1-22
• /
• 1988

The educational policy of a nation should be based on the results of nation-wide studies and their analyses. This study is the third one in a series of research on "development of improvement plan and monitoring system for secondary school science", focusing on the three major areas, such as students' achievements, science instruction and conditions for science education in vocational high schools. In general, the results showed that science achievements in vocational high schools were significantly lower than those of general high schools. While the achievement level in physics was lower by one percent, the achievement levels in chemistry and biology were significantly lower by more than 5 percents. In the case of scientific inquiry, the results showed much lower scores compared to those of general high schools. Concerning the inquiry abilities, most of the students did not possess the formal operational thinking skills such as controlling variables and combinatorial thinking. The ability of experimental skills seemed to be closely related to the students' majors. Students in industrial arts schools could measure electric resistance very well, while students in agricultural high school students failed completely. In the area of students' attitude toward science, the greater part of the students had the experiences of using scientific equipments (68.6 %), experimentation (54.3 %), and extracurricular science activities (56.9 %). They also showed positive attitude towards the nature of science (59.8%). The results of the survey on science instruction and school conditions for science education showed the needs for improvement In general, the priority of science education in vocational high schools was very low compared to their major subjects. The teachers as well as students thought science text books nor to be difficult These responses and the low achievement levels seemed to be contradictory to each other. The facilities for science experiments were better equipped and installed to general high schools. However. the lack of budget was a major problem for performing experiments uning the facilities. Therefore. science education in vocational high school have many things to be improved For the improvement of science education in vocational high schools, financial support as well as the intention for the improvement must be the essential factors.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.3
• /
• pp.311-318
• /
• 2000

The importance of the semiconductor industry in Korea has been growing, but the manufacturers are experiencing two major problems: poor optimization of production and low localization ratio of production equipments. Due to the complex manufacturing processes and special features such as OTD (On Time Delivery) and LIPAS (Line Item Performance Against Schedule) possibilities, several attempts to apply MRP or spreadsheet have been failed to meet the expectations. This paper describes the computer modeling technique as the solutions to analyze the problem, to formalize the semiconductor manufacturing process, and to build an advanced manufacturing environments. The computer simulation models are built referring the FAB facilities of the National Inter - University Semiconductor Research Center to show the FAB processes and the functions of each process.

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.395-402
• /
• 2012

This study has been conducted to design and implement smart phone-based application which can keep records effectively to improve athletes' ability. To boost their performance, they need to receive training as realistic as possible. As a way to do that, training should be performed with some fitness equipments, sporting apparatus, facilities, and conditions. However, it is also possible to improve their ability by motivating athletes with checking and recording their performance. This study ascertains that using scoring records actually motivates athletes when comparing the result of youth basketball team using the records keeping system with that of not using it. Accordingly, smart phone-based records keeping application has been designed and developed. Also, through a survey targeting athletic coaches who have used the system, training efficiency has been measured and it turns out that it actually motivates athletes to improve their abilities.