• Journal of Microbiology and Biotechnology
• /
• v.31 no.12
• /
• pp.1716-1721
• /
• 2021

Chikungunya fever is an arboviral disease caused by the Chikungunya virus (CHIKV). The disease has similar clinical manifestations with other acute febrile illnesses which complicates differential diagnosis in low-resource settings. We aimed to develop a rapid test for CHIKV detection based on the nucleic acid lateral flow immunoassay technology. The system consists of a primer set that recognizes the E1 region of the CHIKV genome and test strips in an enclosed cassette which are used to detect amplicons labeled with FITC/biotin. Amplification of the viral genome was done using open-source PCR, a low-cost open-source thermal cycler. Assay performance was evaluated using a panel of RNA isolated from patients' blood with confirmed CHIKV (n = 8) and dengue virus (n = 20) infection. The open-source PCR-NALFIA platform had a limit of detection of 10 RNA copies/ml. The assay had a sensitivity and specificity of 100% (95% CI: 67.56% - 100%) and 100% (95% CI: 83.89% - 100%), respectively, compared to reference standards of any positive virus culture on C6/36 cell lines and/or qRT-PCR. Further evaluation of its performance using a larger sample size may provide important data to extend its usefulness, especially its utilization in the peripheral healthcare facilities with scarce resources and outbreak situations.

• Plant Journal
• /
• v.18 no.1
• /
• pp.50-54
• /
• 2022

The demand for high-efficiency dust collectors is rapidly increasing to remove PM from exhaust gas emission facilities, such as thermal power plants, steel mills, and industrial cogeneration plants, as the Pmemission standards have been strengthened. In this study, the electrospray is adapted for existing electrosratic precipitator(EP) to remedy its shortcomings and to improve the performance. Electrospray has been mainly used for the purpose of generating very fine droplets, but fir the purpose of EP, the flow rate over 10 mL/min per nozzleis required, and a high flow rate condition of 65 to 200 times is required. The electrospray of high flow rate has a completely different spray shape from the low flow rate condition, and was visualized through various figures such as corona discharge photographs and shadow images.

• Journal of Creative Information Culture
• /
• v.6 no.1
• /
• pp.15-21
• /
• 2020

In order to utilize big data in general industrial sites, the structured big data collected from facilities, processes, and environments of industrial sites must first be processed and stored, and in the case of unstructured data, it must be stored as unstructured data or converted into structured data and stored in a database. In this paper, we study a method of collecting big data based on open IoT standards that can converge and utilize measurement information, environmental information of industrial sites to collect big data. The platform for collecting big data proposed in this paper is capable of collecting, processing, and storing big data at industrial sites to process real-time sensing information. For processing and analyzing data according to the purpose of the stored industrial, various big data technologies also can be applied.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.6
• /
• pp.371-380
• /
• 2021

This study aims to design a tunnel part model for underpass and subway lines that correspond to tunnel sector among the underground facilities(structure types) covered in the integrated map of underground spaces. For this purpose, we compared and reviewed the characteristics of international standards related to tunnel data models. As a result, it was found that CityGML 3.0 - Tunnel module was the most suitable for designing a 3D tunnel data model. Afterwards we reviewed the legal and institutional regulations to derive the standard elements of the 3D tunnel data model. Then we conducted a demand survey targeting experts in related fields to derive standard elements for addition and extension of underpasses and subway lines. Based on the above process, we designed and presented a 3D tunnel data model using UML. This study is expected to be meaningful as a basic study to improve the utilization of tunnel model in the integrated map of underground spaces.

• Land and Housing Review
• /
• v.14 no.1
• /
• pp.99-114
• /
• 2023

This study was conducted to review the adequacy and applicability of the safety certification system for educational facilities which was implemented in 2021 and to derive possible improvements to the existing certification system. This study analyzed the existing certification system, examined similar systems from abroad, conducted interviews with certification experts, and presented the proposed improved system to experts for review and advice. The proposed model replaced the current certification process with three stages of follow-up management. This allows for problems that may occur in the evaluation process and the composition of evaluators to be prevented by applying a feedback system. In the review stage of the newly proposed certification system, certification experts recommended specifying the detailed standards of certification performance such as criteria for selecting examiners and arbitrators. They concluded that there were no fatal flaws in the overall structure of the evaluation system. According to the results of this review, the proposed evaluation system was proven to be an effective improvement to the existing system.

• Journal of Platform Technology
• /
• v.10 no.2
• /
• pp.20-26
• /
• 2022

Interest and investment in drones that apply the concept of the 4th industrial revolution and ICT convergence advanced technology are continuing. The purpose of drone operation has been widely spread from the initial military use to the use of various industries such as construction, forestry, facilities, and agricultural support. In these industries, the training of pilots who can actually operate drones is increasing centering on the qualification system. However, the detailed standards including the training place, training place, educational environment, and education method for nurturing pilots are ambiguous, so the education through the oral instruction of the training instructor is continuing at the drone training site. In order to solve this problem, this study conducted a study on a dual control platform in which a training instructor could directly intervene in the pilot's flying drone to execute a map in order to improve the quality of synesthesia, which is essential in the field.

• Journal of the Korean Institute of Gas
• /
• v.26 no.2
• /
• pp.39-48
• /
• 2022

The domestic gas detector installation standards applied to gas detectors, which are one of the facilities that can prevent accidents such as fire, explosion, and leakage that can cause serious industrial accidents, do not take into account the behavioral characteristics of hazardous chemicals in the atmosphere. It can be seen that the technical basis is insufficient because the standard is applied. Therefore, in this study, the size of the leak hole for each facility mainly used in chemical plants and the diffusion distance according to the concentration of interest of hazardous chemicals were analyzed, and based on this, the optimal installation distance for gas detectors for each material was suggested. Using the method presented in this study, more economical and effective gas detector installation can be expected, and furthermore, it can be expected to help prevent serious industrial accidents.

• Journal of the Korean Dietetic Association
• /
• v.29 no.3
• /
• pp.123-139
• /
• 2023

In this study, a survey was conducted on the development of meal kits for children's foodservice to increase the convenience of the cooking process. It was performed among the foodservice managers in the 141 children's foodservice facilities registered in the Center for Children's Foodservice Management about meal-kits in Changwon areas. The survey results were analyzed according to the children's foodservice scale type. The biggest problem in a foodservice system was "difficult to purchase food ingredients directly every week" (38.4%) in small-scale children's foodservices, and "difficult to use the served menu without modification" (38.2%) in institutional children's foodservices (P<0.001). The most important factor when choosing the meal kit was "quality" (41.1%). Respondents on having an experience with using the meal kit were low at 34.8%, and the reasons for not using the meal kits were "expensive" (67.3%) and "not fresh food ingredients" (18.4%). The main reasons for not using children's foodservice meal kits were "expensiveness" (64.4%) and "necessity of adding disinfection process" (16.1%). Most of the reasons for not wanting to use children's foodservice meal kits were that they did not trust the safety of the meal kits. The use of meal kits in children's foodservices may reduce the preparation process and increase the efficiency of foodservice although the safety and quality of meal kits should be guaranteed. The appropriate hygiene management standards need to be set, and HACCP should be applied to develop meal kits for children's foodservices.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.3
• /
• pp.19-26
• /
• 2023

Critical information infrastructure designations for cloud service providers continue to spread around the world as energy, financial services, health, telecommunications, and transportation sectors move to the cloud. In addition, in the case of Ukraine, the removal of restrictions on the use of cloud for national critical facilities and the rapid transition of critical data to the cloud enabled the country to effectively respond to cyberattacks targeting Russian infrastructure. In Korea, the ISMS-P is operated to implement a systematic and comprehensive information protection management system and to improve the level of information protection and personal information protection management in organizations. Control items considering the cloud environment have been modified and added to the audit of companies. However, due to the different technical levels of clouds between domestic and global, it is not easy to obtain information on the findings of cloud providers such as Microsoft for the training of domestic certification auditors on hyperscale scale. Therefore, this paper analyzes findings in hyperscale clouds and suggests ways to improve cloud-specific control items by considering the compatibility of hyperscale environments with ISO/IEC 27001 and SOC(System and Organization Control) security international standards.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.2
• /
• pp.387-392
• /
• 2022

In addition to complying with access standards for facilities that require infection control (operating rooms, delivery rooms, intensive care units, etc.) in accordance with the 2019 Medical Care Act Enforcement Regulations, entry, exit, contact information, etc. for entry and exit, the criteria for entering and exiting special rooms of medical institutions have been revised so that records of facts are kept for one year. However, even now, the inconvenience continues due to the fact that such contents are created by hand or due to errors. For this reason, this study designed and implemented a system that provides automatic opening, closing, and accessing record storage functions for authorized users using IoT devices and UWB technology, and we expected that the convenience of the visitors and systemized access control will be possible.