• The Journal of the Korea Contents Association
• /
• v.21 no.7
• /
• pp.440-447
• /
• 2021

The purpose of this study is to verify the effectiveness of non-face-to-face lectures conducted at universities in Korea under the influence of COVID-19. So this study analyzed the satisfaction level of the students according to the type of class operation, such as face-to-face classes and remote video classes. To this end, this study compared the differences in class satisfaction by class type and class size for a total of 8,707 courses operated by a university between 2019 and 2020. The study found that the satisfaction level of the remote video class was significantly high. In addition, the combination of remote video classes and face-to-face was more satisfactory than other cases. On the other hand, the satisfaction level of small classes in both face-to-face and remote video classes was higher than that of medium or large classes. This means that even remote video classes are highly satisfactory in small-scale classes. Based on the findings, the study proposes a paradigm for new college classes.

• Journal of Sensor Science and Technology
• /
• v.26 no.1
• /
• pp.24-27
• /
• 2017

In this study, I developed a simple and low cost process-printing a silver, carbon, dielectric, adhesive layer on PET films using screen printing technology and bonding the two films face-to-face-to fabricate a low price capacitive pressure-mapping sensor. Both electrodes forming the pressure measuring capacitor are arranged between the two PET films similar to a sandwich. Therefore, the sensor has the advantage of minimizing the influence of external noise. In this study, a $10{\times}10$ capacitance-type pressure-mapping sensor was fabricated and its characteristics were analyzed.

• The Journal of Engineering Geology
• /
• v.31 no.4
• /
• pp.463-478
• /
• 2021

The subjects of the study are the sedimentary rock slope of the Mesozoic Gyeongsang Supergroup, which has a high risk of failure. The orientation of the slope-face represents a variety of changing characteristics. The rocks of the slope shall be sandstone, siltstone and dacite, and discontinuities shall develop beddings, shear joints, extension joints, and dacite dyke boundary planes. The type and scale of failure varies depending on the type of rock and the strike/dip of the discontinuities, but the toppling failure prevails. Based on the face-mapping data, SMR, physical and mechanical testing of rocks, analysis and review of the stereonet projections and the critical equilibrium analysis, all four representative sections required a countermeasure method because the acceptable safety factor during dry and rainy seasons were far below Fs = 1.5 and Fs = 1.2. After applying the countermeasure method, both the dry and wet conditions of the slope exceeded the allowable safety factor. In particular, the face-mapping data of the slope-face, the geological cross-sections of several representative sections perpendicular to the slope-face, and the critical equilibrium analysis and the presentation of countermeasure methods that have been reviewed based on them are expected to be reasonable tools for the slope stability. In addition, it will be possible to use it as basic data for performance evaluation for slope maintenance.

• The Journal of the Korean dental association
• /
• v.50 no.10
• /
• pp.620-623
• /
• 2012

The use of botulinum toxin type A in the lower face has increasingly popular. And treatment of the depressor anguli oris muscle(DAO) and the mentalis muscle(MT), particularly in combination with filler substances, produces a remarkable improvement in the lower aged face. The aim of this study was to demonstrate the topographical anatomy of the DAO, MT, and their related structures, thereby providing critical information for determining the safest and most effective site for BTX-A injections. The most effective injection sites of DAO and MT were suggested based on the new anatomical knowledge of the lower face.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.3
• /
• pp.32-38
• /
• 2006

During stereolithography processes, the shape errors such as curl distortion and distortion of side face are generated due to the shrinkage of liquid resins. In this study, the effects of dimension of part and structure of supports on the shape error are examined. Cubic specimens which have different thicknesses are manufactured and their deformations are measured with CMM. Thicker part generates smaller curl distortion of top face and larger of bottom face. Also thicker part generates larger distortion of side face until part thickness increases to about 20mm. Larger stiffness of supports which is obtained by shorter spacing of the supports and line type contact instead of point type contact generates smaller shape error of the part.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.265-272
• /
• 2003

In this study, the rock mass classification results from the face mapping and the resistivity inversion data are compared and analyzed for the reliability investigation of the determination of the rock support type based on the surface electrical survey. To get the quantitative correlation, rock engineering indices such as RCR(rock condition rating), N(Rock mass number), Q-system based on RMR(rock mass rating) are calculated. Kriging method as a post processing technique for global optimization is used to improve its resolution. The result of correlation analysis shows that the geological condition estimated from 2D electrical resistivity survey is coincident globally with the trend of rock type except for a few local areas. The correlation between the results of 3D electrical resistivity survey and the rock mass classification turns out to be very high. It can be concluded that 3D electrical resistivity survey is powerful to set up the reliable rock support type.

• Journal of Korean Home Economics Education Association
• /
• v.34 no.1
• /
• pp.151-165
• /
• 2022

The aim of this study is to examine the effectiveness of non-face-to-face classes conducted due to the COVID-19 crisis. In order to achieve this goal, a non-face-to-face class with flipped learning was applied in one subject of clothing major held at 'S' University in Cheongju, Korea. In addition, this study tried to analyze the differences between pre- and post-non-face-to-face classes in problem analysis ability, resource/information/technology literacy, convergent thinking ability as core competencies, and overall learning satisfaction. As a result, after participating in the non-face-to-face class in which the flipped learning was applied, the students recognized that their abilities improved in the three problem-solving competency sub-areas, and their overall learning satisfaction also increased. The effectiveness of non-face-to-face classes in the field of clothing and fashion has been mainly measured in fashion design and clothing construction courses. However, based on the results of this study, it can be suggested that non-face-to-face classes in a theory-oriented lecture-type class can be effective methods for improving students' core competencies such as problem-solving skills if teaching-learning methods such as flipped learning are applied. Therefore, the results of this study will be useful data for designing differentiated non-face-to-face class strategies in a theory-oriented lecture-type class to improve the core competencies of college students.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.4 s.40
• /
• pp.447-451
• /
• 1991

Effects of insulation after exposure of the extremities on the temperature regulation in clothed men were studied. Experiment was carried out with six males in a climatic chamber fixed at $10^{\circ}C$, $55\%$ R.H. treated with Type A (face only was exposed) and Type B (face and half of the extremities were exposed). Mean skin temperature fell greater in Type B due to intense vasoconstriction than in Type A. Rectal temperature rose a little in Type B and resumed in Type A without any significant differences in metabolism between two types of clothing. These findings suggest that Type B is more effective in physiological defense to the cold stimuli than Type A at least at $10^{\circ}C$.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.5
• /
• pp.499-509
• /
• 2016

In recent years, the use of underground spaces becomes more frequent and the demands for urban tunnels are rapidly increasing. The urban tunnels constructed in the ground with a shallow and soft cover might be deformed in various forms on the face, which would lead, the tunnels to behavior 3-dimensionally, which may have a great impact on the longitudinal load transfer. The tunnel face might deform in various forms depending on the construction method, overburden and the heterogeneity of the ground. And accordingly, the type and size of the distribution of the load transferred to the ground adjacent to the tunnel face as well as the form of the loosened ground may appear in various ways depending on the deformation form of the tunnel face. Therefore, in this study was conducted model tests by idealizing the deformation behavior of the tunnel face, that were constant deformation, the maximum deformation on the top and the maximum deformation on the bottom. And the test results were analyzed focusing on the deformation of the face and the longitudinal load transfer at the ground above the tunnel. As results, it turned out that the size and the distribution type of the load, which was transferred to the tunnel as well as the earth pressure on the face were affected by the deformation type of the face. The largest load was transferred to the tunnel when the deformation was in a constant form. Less load was transferred when the maximum deformation on the bottom, and the least load was transferred when the maximum deformation on the top. In addition, it turned out that, if the cover became more shallow, a longitudinal load transfer in the tunnel would limited to the region close to the face; however, if the cover became higher than a certain value, the area of the load transfer would become wider.

• Journal of Arbitration Studies
• /
• v.19 no.2
• /
• pp.155-178
• /
• 2009

The ODR can be categorized into four distinctive types. First type is the asynchronous non-demeanour method. Second type is the asynchronous demeanour method. Third type is the synchronous demeanour method. Fourth type is the synchronous demeanour method. A typical example of the asynchronous and non-demeanour method is e-mail. The example of the synchronous and non-demeanour method is tele conference. The example of the asynchronous demeanour method is video recordings. The example of synchronous and demeanour method is video conference. The primary benefit of e-mail is to avoid the physical violence. But the costs of email is the lack of emotional aspects of disputants. The benefits of tele conference is ease of use, and reduces the negative aspects of face to face communication. but the costs are limitation of the exchange of written information. The benefits of video conference is the approximation of face to face communication by providing oral as well as visual communication. but it is insufficient to represent eye contact. The common limitations of ODR are as follows. First is the lack of human face. Second is the neutrality of arbitrators and mediators. Third is the authenticity of electronic document. Fourth is the digital divide across South and North and generations. Fifth is the cross-cultural communication. The development strategy of ODR is the training and education of arbitrators and mediators in the area of writing skill. Furthermore, it is necessary to supplement the weakness of email via diverse kinds of expressions to show emotions. Finally, it is necessary to train neutrals in the area of cross-cultural communication.