• 한국정보통신학회논문지
• /
• 제23권12호
• /
• pp.1492-1499
• /
• 2019

이 논문에서는 적응적 패럴랙스 베리어 방식에서, 시청영역을 제어할 수 있도록 사용자의 위치를 추적하는 방법을 제안한다. 얼굴자세에 강건한 양안거리 측정을 위해, 형태모델과 랜드마크 기반인 CLM으로 자세를 추정한다. 카메라와의 상관관계로, 거리와 수평위치를 거리로 변환한다. 사용자의 눈의 위치에 따라 적응적 패럴랙스 베리어의 화소간격을 조정하고, 베리어를 이동해 시청영역을 조정한다. 이 논문에서는 60cm부터 490cm의 범위에서 사용자를 추적하는 방법을 제안하고, 카메라 영상의 해상도에 따른 에러, 측정 가능 범위, fps를 측정하였다. 그 결과, 사용자를 평균 3.1642cm의 절대오차 범위내로 측정 가능하였으며, 영상의 해상도에 따라 320×240에서 약 278cm, 640×480에서 약 488cm까지, 그리고 1280×960에서 약 493cm까지를 측정할 수 있었다.

• Tribology and Lubricants
• /
• 제38권5호
• /
• pp.213-221
• /
• 2022

This paper presents performance measurements of pressure drop and leakage flow rate of test flat seals with asymmetric inclined grooves. This study aims to reveal the influence of groove shapes, often machined in radial film riding-face seals, in forming a hydrodynamic wedge on leakage performance. A test facility was developed, and test seals were manufactured to study the effects of the inlet pressure level, ratio of inlet to outlet pressure, seal groove length, and seal groove height on the steady-state pressure drop and leakage performance. A series of tests were conducted, and the test data were compared to the predictions from a simple and efficient mathematical model using a one-dimensional Reynolds equation. The test results revealed that an increase in the inlet pressure increased the pressure drop through the test seals. The leakage flow rate increased significantly as the inlet pressure and ratio of the inlet to outlet pressure increased. The groove shape also affects seal performance. An increase in the groove length and height resulted in an evident increase in the leakage flow rate. The simple model predictions underestimated the leakage flow rates but showed good agreement with the trend in the measurements for all test operating conditions and changes in the groove shape.

• 사물인터넷융복합논문지
• /
• 제9권3호
• /
• pp.13-19
• /
• 2023

본 논문에서는 빅데이터와 딥페이크 기반의 헤어스타일 추천 시스템 구현에 관해 연구하였다. 제안한 헤어스타일 추천 시스템은 사용자의 사진(이미지)을 바탕으로 얼굴형을 인식한다. 얼굴형은 타원형, 둥근형, 장방형으로 구분하며, 얼굴형에 잘 어울리는 헤어스타일을 딥페이크를 통해 합성하여 동영상으로 제공한다. 헤어스타일은 빅데이터를 바탕으로 최신 트랜드(trend)와 얼굴형에 어울리는 스타일을 적용하여 추천한다. 이미지의 분할 맵과 Motion supervised Co-Part Segmentation 알고리즘으로 같은 카테고리(머리, 얼굴 등)를 가지는 이미지들 간 요소를 합성할 수 있다. 다음으로 헤어스타일이 합성된 이미지와 미리 지정해둔 동영상을 Motion Representations for Articulated Animation 알고리즘에 적용하여 동영상 애니메이션을 생성한다. 제안한 시스템은 가상 피팅 등 전반적인 미용산업에 활용될 수 있을 것으로 기대한다. 향후 연구에서는 거울에 사물인터넷 기능 등을 적용하여 헤어스타일등을 추천해주는 스마트 거울을 연구할 예정이다.

• 대한지리학회지
• /
• 제28권2호
• /
• pp.77-98
• /
• 1993

본 연구는 암설사면지형이 잘 발달하고 다양하게 분포하는 태백산맥의 남부산지를 대상으로 항공 사진판독과 도상계측 및 현지조사를 통하여 노출암설사면의 분포, 형태 및 퇴적물의 특성을 분석하고 사면의 지형적 배열과 지형발달에 관해서 연구한 논문으로써 분포적 특성에 있어서는 애추의 경우 기반암이 경암이거나 절리가 잘 발달된 지질에서, 암괴류의 경우는 화강섬록암 지질에서 높은 분포밀도를 보였다. 형태적 특성은 애추, 암괴류 모두 설상이 각각 83${\%}$, 80${\%}로 가장 많았으며 지형면의 경사도에 있어서는 애추가, 길이에 있어서는 암괴류가 각각 우세했다. 퇴적물의 특성중 암설의 평균입경은 암괴류가 보다 크게 나타났다. 한 지형면에서 암설의 장축방향성의 경우 방향성 있는 경우와 없는 경우가 있는데, 후자는 지형면상의 함몰로 그 방향성이 상실된 것으로 보인다. 끝으로 지형발달의 경우, 애추는 암석낙하(rock fall)에 의한 형성기(최종빙기)와 2차적인 영역에 의한 조정기(후빙기)로 암괴류는 암괴의 생성기(제3가 또는 제 4기의 간빙기), 암괴류의 형성기(최종빙기), 조정기(후빙기)로 구분할 수 있었다. 그리고 산지 사면의 배열유형은 6가지 유형으로 분류되었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.401-404
• /
• 2007

Inertia welding is a solid-state welding process in which butt welds in materials are made in bar and in ring form at the joint face, and energy required for welding is obtained from a rotating flywheel. The stored energy is converted to frictional heat at the interface under axial load. The quality of the welded joint depends on many parameters, including axial force, initial revolution speed and energy, amount of upset, working time, and residual stresses in the joint. Inertia welding was conducted to make the large rotor shaft for low speed marine diesel engine, alloy steel for shaft of 140mm. Due to different material characteristics, such as, thermal conductivity and flow stress, on the two sides of the weld interface, modeling is crucial in determining the optimal weld geometry and parameters. FE simulation was performed by the commercial code DEFORM-2D. A good agreement between the predicted and actual welded shape is observed. It is expected that modeling will significantly reduce the number of experimental trials needed to determine the weld parameters.

• 복식
• /
• 제62권5호
• /
• pp.96-107
• /
• 2012

In ancient times, immigrants from Baekje wore various kinds of costumes that provided technological and aesthetic guidance for the Japanese costume, which has been modified and changed in Japan. The clothing and ornaments were strongly influenced directly by costumes of the Baekje period; therefore, many of the Japanese costumes at that time were crafted in the Baekje style. Through the antique records, paintings of tombs and bequests, we were able to find similarities between Baekje and Japan costumes in these categories: clothes, headgear, belt hooks and belt plaques, bronze shoes, and ornaments. (1) Clothes : They wore high-shaped hat and jacket and trousers(;袴) tied the bottom. (2) Headgear : There was a gilt bronze Conical Cap attached to the long tube with terminals in the shape of a hemisphere. (3) Belt hooks and belt plaques: There were horse-shaped belt hooks in mane styles and a checkered pattern on the lower part of the haunch and a belt Plaque shaped like the face of an animal. (4) Gilt bronze shoes: They were made with the style that had two side plates fixed in the instep side and heel-side. (5) Ornaments : They were made with flower-shaped plaques and spiral-shaped decorations. One earring was made with a three-winged pendent that were connected in a chain style and the others were in unique forms that were made by connecting narrow rings and a heart-shaped pendent.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제12권3호
• /
• pp.49-56
• /
• 1990

Facial balance is the primary detevminant of good facial esthetics and is expressed externally by the shape of facial soft tissues. Balance of the facial skeleton is most important in prediction of orthognathic surgery, however, it is not alwags coincided to soft tissue balance because the soft tissue drapes overlying hard tissue varies in thickness and tones from case to case. So, soft tissue facial balance and esthetics also should always be considered in prediction of hard tissue changes preoperatively. The chin has a paramount importance in the overall appearance of the face and facial profile because it may express individual charactor or image. Therefore positional change of the chin must be considered in any cases as the last and important option to give an overall soft tissue balance. Two cases were referred from orthodontists only for anterior segmental of teortomuy of the chin. Pre-operative evaluation showed poor soft tissue chin profiles which were not coincided to hard tissue chin balance. We altered surgical plans to fulfill balancing soft tissue profile and then could improve overall esthetics after surgery.

• 혜화의학회지
• /
• 제21권2호
• /
• pp.49-61
• /
• 2013

The humans has tried to investigate the fundamental relationship of all phenomena through the eyes. In oriental medicine, inspection is a one way of diagnosing by observing outer shape of patients. Physiognomy is the study which infers characteristics, constitutions, predestinations of one man from his appearance. In other words, the study is about how inner spirit is expressed in the appearance and how we could understand the inner side from appearance. According to it, shapes, proportions and balances of human appearance also reflect the unrecognized characteristics of human. Esthetical beauty is product of seeing, it is considered with judgment of human just like beauty or ugliness, right or wrong, good and bad. In the east, they consider that the beauty is balance of nature, and that balance and harmony is important at human's face. For such a reason, the highest beauty has ideal as agreement ethical and aesthetic level through the harmony of ethical and physical beauty. And Physiognomy and inspection are the same as it.

• Advances in nano research
• /
• 제6권2호
• /
• pp.183-200
• /
• 2018

In the present study silver nanoparticles (AgNPs) were successfully synthesized using aqueous extract of Sargassum muticum. The aqueous extract (10%) treated with 1 mM silver nitrate solution resulted in the formation of AgNPs and the surface plasmon resonance (SPR) of the formed AgNPs was recorded at 360 nm using UV-Visible spectrophotometer. The molecules involved in the formation of AgNPs were identified by Fourier transform infrared spectroscopy (FT-IR), surface morphology was studied by using scanning electron microscopy (SEM), SEM micrograph clearly revealed the size of the AgNPs was in the range of 40-65 nm with spherical, hexagonal in shape and poly-dispersed nature, and X-ray diffraction spectroscopy (XRD) was used to determine the crystalline structure. High positive Zeta potential (36.5 mV) of formed AgNPs indicates the stability and XRD pattern revealed the crystal structure of the AgNPs by showing the Bragg's peaks corresponding to (111), (200), (311) and (222) planes of face-centered cubic crystal phase of silver. The synthesized AgNPs exhibited effective anticancerous activity (at doses 25 and $50{\mu}g/ml$ of AgNPs) against Breast cancer cell line (MCF7).

• 콘크리트학회논문집
• /
• 제12권2호
• /
• pp.63-69
• /
• 2000

This study investigates a new method of using a concrete disk to calculate stress intensity factor (SIF) for mixed mode cases. The results indicate that the disk method is more accurate than three point bending test (TPB) in obtaining correct SIF values for mixed mode fracture propagation. Stress intensity factors $K_{I}$ and $K_{II}$ are calculated using a center notched disk subjected to splitting load. The notch angle is calculated by finite element (FEM). Fracture toughness $K_\textsc{k}$ of the concrete is obtained from the load intensities at the initiation of crack propagation. According to the finite element analysis(FEA) and disk test, the results show that mode I and mixed mode cracks propagate toward the directions of crack face and loading point, respectively. The results from FEA with maximum stress theory compare well with the experimental date. Unlike TPB method where an accurate fracture toughness value is difficult to obtain due to the irregular shape of load deflection curve and delayed final crack propagation (following slow stable cracking). fracture toughness value is easily measured in the disk test from the crack initial load. Therefore, it is safe to conclude that disk method is more advantageous than TPB method in analyzing combined mode fracture problems.